[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
BLF state is broken after simultaneous call to watched account
Author Message
strang Offline
Junior Member
**

Posts: 6
Joined: Jun 2015
Reputation: 0
Post: #1
BLF state is broken after simultaneous call to watched account
Hello,

reproduced on Yealink T28P with old (2.70.23.2) and new (2.73.0.50) firmware

UA - 000201 (Yealink T28P)
"A" - 000333
"B" - 000300
"C" - 000335

Scenario:
1) UA (Yealink T28P) is subscribed to Account "A" ==> BLF lamp is solid green (free)
2) "A" calls "B", "B" answers call ==> BLF lamp is solid red
3) "C" calls "A", "A" is ringing ==> BLF lamp is blinking red
4) "C" drops call ==> BLF lamp is solid green despite active "A"-"B" call

As I can see the same issue has been already reported here - http://forum.yealink.com/forum/showthread.php?tid=1224 .

Is there any chance to get it fixed on new firmwares ?
06-10-2015 04:11 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
James_Yealink Offline
Administrator
*******

Posts: 1,159
Joined: Aug 2014
Reputation: 8
Post: #2
RE: BLF state is broken after simultaneous call to watched account
Hello,

Please enable this parameter by autoprovision and check again.

account.1.blf_notify_parse_type = 1

BTW, what's your pbx server?

Regards,
James
06-10-2015 05:20 PM
Find all posts by this user    like1    dislike0 Quote this message in a reply
strang Offline
Junior Member
**

Posts: 6
Joined: Jun 2015
Reputation: 0
Post: #3
RE: BLF state is broken after simultaneous call to watched account
Hello James

I've tried the following:
- open Settings/Configuration tab
- exported Export CFG Configuration File (All configuration)
- edited it and added account.2.blf_notify_parse_type = 1 (I use second line of my Yealink to subscribe for blf)
- imported edited configuration back to phone
The result is the same - green blf despite active call

I've also checked provisioning guide http://support.yealink.com/attachmentDow...V73_40.pdf but there is no such option (account.1.blf_notify_parse_type)
What I did wrong ?
06-10-2015 06:45 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
James_Yealink Offline
Administrator
*******

Posts: 1,159
Joined: Aug 2014
Reputation: 8
Post: #4
RE: BLF state is broken after simultaneous call to watched account
Hi, can you send us a pcap trace and phone config.bin file? We will check the two files.
And what's your pbx server?

Regards,
James
06-11-2015 10:43 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
strang Offline
Junior Member
**

Posts: 6
Joined: Jun 2015
Reputation: 0
Post: #5
RE: BLF state is broken after simultaneous call to watched account
Hi,
here are syslog, config.bin and trace pcap files with level 6 syslog from mentioned Yealink T28P. I've collected it some time ago with old firmware. However as with the latest firmware the issue is the same I believe old logs must contain the same info.
I'm using PortaSwitch (http://portaone.com/portaswitch/index.php)


Attached File(s)
.zip  logs(1).zip (Size: 49.05 KB / Downloads: 2)
06-11-2015 01:45 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
James_Yealink Offline
Administrator
*******

Posts: 1,159
Joined: Aug 2014
Reputation: 8
Post: #6
RE: BLF state is broken after simultaneous call to watched account
Hi,

We had met same issue with portaone PBX. After enabling this option, phone work well with BLF.
Can you send me the config.bin of your phone with V73 firmware? I will check whether the option is enabled correctly.

Regards,
James
06-11-2015 02:38 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
strang Offline
Junior Member
**

Posts: 6
Joined: Jun 2015
Reputation: 0
Post: #7
RE: BLF state is broken after simultaneous call to watched account
Attached.
As i've said above I tried to apply option to Account2
(This post was last modified: 06-11-2015 03:10 PM by strang.)
06-11-2015 02:42 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
James_Yealink Offline
Administrator
*******

Posts: 1,159
Joined: Aug 2014
Reputation: 8
Post: #8
RE: BLF state is broken after simultaneous call to watched account
The parameter is configured correctly. From the configuration file, it seems that you create some test accounts in server?
Can you send the four test accounts you use to my mail James@yealink.com? I will reprdocue it in our side.

Regards,
James
06-11-2015 03:02 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
strang Offline
Junior Member
**

Posts: 6
Joined: Jun 2015
Reputation: 0
Post: #9
RE: BLF state is broken after simultaneous call to watched account
Ok, give me 15 minutes to prepare test accounts.

Sent to you 30 minutes ago.
(This post was last modified: 06-11-2015 04:03 PM by strang.)
06-11-2015 03:11 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
strang Offline
Junior Member
**

Posts: 6
Joined: Jun 2015
Reputation: 0
Post: #10
RE: BLF state is broken after simultaneous call to watched account
Summary:
Option account.2.blf_notify_parse_type = 1 (account.ACC_NUMBER.blf_notify_parse_type = 1) really helps in situations like this
Phone needs to be rebooted after importing edited config file (do not know, maybe if UA is provisioned from some provisioning server this option might be applied on the fly).
Thanks to James Smile
06-11-2015 06:04 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  MP50 ends call in some phone trees TRK45 0 1,130 05-10-2023 12:19 AM
Last Post: TRK45
  W60B - LDAP - Missing names in call history Scherm 0 1,136 03-07-2023 02:06 AM
Last Post: Scherm
  MP56 - MS Teams Call Queue name not showing grahamhosking 1 3,459 03-03-2023 05:59 AM
Last Post: MSinclair@bunker.technology
  MP50 - Unable to use pound (#) key during a phone call Alexandre Cottinet 0 1,804 02-14-2023 10:28 PM
Last Post: Alexandre Cottinet
  MP50 won't initiate a call on a Mac (Big Sur) computer? microdaft 2 7,478 05-31-2022 01:54 AM
Last Post: Christianpoulton
Brick MP50 stuck after call transfer af@benenden.school 4 9,165 12-22-2021 07:24 PM
Last Post: af@benenden.school
  Cannot disable audible Park notifications during active call livehappy42 3 5,403 11-13-2021 09:11 AM
Last Post: livehappy42
  T57W Call Park Alert bcramer 1 5,901 10-29-2021 05:33 AM
Last Post: livehappy42
Sad T22P No Sound on Call Pick Up oaltinsoy853 1 5,212 10-19-2021 07:22 PM
Last Post: complex1
  T58 Call Park and Transfer Problems user42491 1 5,441 08-03-2021 09:24 PM
Last Post: complex1

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication