[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
One Button Parking
Author Message
rkellogg Offline
Junior Member
**

Posts: 8
Joined: Jul 2014
Reputation: 0
Post: #1
One Button Parking
I need to know how to setup a BLF/Line key to put a call on hold.

I normally press the transfer soft key and then dial 70#

If Possible I would like to "Rewire" the hold button to send the call to the parking lot.

Thanks in advance for the help.

Roger
06-02-2015 05:53 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
CWR Offline
Moderator
*****

Posts: 717
Joined: May 2013
Reputation: 7
Post: #2
RE: One Button Parking
The PBX Type is helpful if you can share that...

On 3cx for instance, I can use the shared Park Button type - programmed as SP1, SP2, etc - and simply hit it to park a call. No transfer required.

Also - I am fairly certain the HOLD button is a local hold only - with no change available. In this manner, which parking spot would you pickup when you hit this button? Or would it be sending to a parking spot only? If so, how do you know which one it is going to?

Craig Reilly
MCSA, 3cx Advanced Certified
Scottsdale, AZ
06-02-2015 06:11 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
rkellogg Offline
Junior Member
**

Posts: 8
Joined: Jul 2014
Reputation: 0
Post: #3
RE: One Button Parking
(06-02-2015 06:11 AM)craigreilly Wrote:  The PBX Type is helpful if you can share that...

On 3cx for instance, I can use the shared Park Button type - programmed as SP1, SP2, etc - and simply hit it to park a call. No transfer required.

Also - I am fairly certain the HOLD button is a local hold only - with no change available. In this manner, which parking spot would you pickup when you hit this button? Or would it be sending to a parking spot only? If so, how do you know which one it is going to?

Sorry I should have mentioned that. I am currently using Elastix. I am upgrading to FreePBX
06-02-2015 06:30 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
John_K Offline
Junior Member
**

Posts: 15
Joined: Jul 2013
Reputation: 1
Post: #4
RE: One Button Parking
I have done this with Asterisk, I use the 'Call-Park' DSS Key type with a value of my parking lot extension, IE if my lot was 701 I'd do 'Call-Park' with 701 in the field and on the applicable line key.

Then when I have a call in progress I can hit that DSS Key and it will park the call and change the hint to in-use and when I hit that key again it will retrieve the call.

Read the docs on the Park and ParkedCall applications in Asterisk to set this up, You will want to use parking hints as well.
06-02-2015 06:37 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
rkellogg Offline
Junior Member
**

Posts: 8
Joined: Jul 2014
Reputation: 0
Post: #5
RE: One Button Parking
That works great. I set it to 70 which was my General parking number. Then it parks it on the next avaliable spot. I already have BLF buttons setup for those parking spots. Works great.
06-02-2015 07:25 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Disable or override transfer soft button rbohac 1 2,602 07-11-2022 10:26 PM
Last Post: rbohac
  Button with led configuration Wesley666 2 8,517 01-27-2022 05:28 AM
Last Post: Beachnuttz
  DSS button label sehiker 2 7,503 08-09-2018 07:19 AM
Last Post: sehiker
  T46 message button programming for comedian mail Tom831 1 7,052 03-06-2018 05:50 AM
Last Post: Tom831
  Call Parking - Yealink Phone - Asterisk 11 vs 13 Velocita Technology 1 7,765 12-26-2017 06:06 AM
Last Post: Lucia_Yealink
  T27G Reset By OK Button yehuda400 2 11,453 09-27-2017 03:21 PM
Last Post: LeafJ
  Redial button Action URL dmark 2 8,312 09-02-2015 04:34 PM
Last Post: dmark
  RD button doesn't process Dialplan sbeu 3 13,795 08-26-2014 10:42 AM
Last Post: sbeu
  T2XXP - Disable Button jason.luka 1 7,033 08-14-2014 05:33 PM
Last Post: Yealink Support
Wink Yealink; button of call forwarding cfreire 1 9,788 06-06-2013 11:41 AM
Last Post: Yealink Support

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication