Log in

IPnexia · 05-29-2015 03:37 PM

Dear yealink,

we have an ip door phone who you can open with a code once you are connected to the doorphone.
I have configured this to a DSS-key on the T26P as DTMF and then the value the doorphone wants.
This has been working like a charm untill yesterday.

Additional information :

Phones T26P with EXT panel.
Software : 6.72.0.50

I have already installed the new software 6.73.0.50 on one phone to test this and with that phone it doesn’t work aswell.

If I press the DSS key where the DTMF is active it doesn’t do anything.
Before you could see that the phone entered the value.

Kind regards
Thomas

**Elaine_Yealink** · 05-29-2015 05:59 PM

Dear Thomas,
I've sent you email to answer your question, please check your mailbox and feedback to me the information request. Thanks in advance.

Regards
Elaine

Possibly Related Threads...
Thread:		Author	Replies:	Views:	Last Post
	No IP address for W60 but T42 working ok	heathb	2	4,042	03-09-2022 05:11 PM Last Post: complex1
	DHCP not working on T26P when OpenVPN is enabled.	LandonL	11	36,261	05-12-2021 10:46 AM Last Post: 1sae
	MWI not working with Fritzbox	frappy	0	3,955	10-05-2020 08:34 PM Last Post: frappy
	DTMF for carrier pre-selection	rpereira	2	8,020	09-22-2018 06:58 AM Last Post: rpereira
	DTMF duration	Mickotabs	1	7,243	08-20-2018 03:09 PM Last Post: complex1
	T41P BLF ligth not working	goHelpDesk.com	2	9,924	10-15-2016 02:10 AM Last Post: CWR
	NTP not working	pio007	1	8,831	11-03-2015 05:05 AM Last Post: pio007
	OpenVPN not working on T26P	jjesson0503	3	11,338	08-22-2015 11:23 AM Last Post: James_Yealink
	T41P BLF not working	steven.kst	1	7,708	08-12-2015 03:56 PM Last Post: Yealink_Michael
	T26 Distinctive Ring not working	jason.fell@classtelecom.co.uk	1	7,649	07-23-2015 07:16 PM Last Post: James_Yealink

Threaded Mode \| Linear Mode DSS key DTMF not working anymore
Author	Message