Newbie ftp question

[whatissip]

I am trying to use an ftp server for provisioning a W52P. From reading the documentation and browsing this forum, it looks like all I need to do is set the Provisioning Server in Phone > Auto Provisioning.

No matter what I enter the log tells me:
May 11 23:05:28 syslog[117]: [0116] 42311180 Ignore the special config [auto_provision.server.url]
And then:
May 11 23:07:50 ATP [350]: ATP <3+error > tftp to file failed, code = -16, msg = Host is not a tftp server, retry = 1

What is the correct format for a ftp Provisioning Server?
Do I need to set anything else to use ftp?

TIA

[Yealink_Peter]

Hi,

Please make sure you have installed a correct ftp server as provisioning server first, such as Wftpd and FileZilla, both are free FTP application softwares for Windows. More information please refer to:Yealink_W52P_IP_DECT_Phones_Auto_Provisioning_Guide_V73_27.pdf on page 62.

The server URL format should like “ftp://username:password@IP/configuration file”, for example “ftp://test1:123456@10.3.6.234/Common.cfg” (Here "10.3.6.234" means the IP address of the provisioning server, "Common.cfg" is the file which you edit your settings in and store in the ftp root directory.
   

Thank you! Any question please feel free to let me know.

Best Regards,
Peter

[whatissip]

That is the information I needed, thanks Peter!