[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Broadworks Call Forward Feature on a LineKey
Author Message
fal Offline
Junior Member
**

Posts: 9
Joined: Jul 2014
Reputation: 0
Post: #1
Broadworks Call Forward Feature on a LineKey
Hello!

I would like to setup a linekey with the Forward-Function.
Via Autoprovision i have configured something like this:
Code:
bw.feature_key_sync = 1
features.fwd_mode = 0
forward.always.on_code = *72
forward.always.off_code = *73

On the first try it works fine. I can enable or disable the feature and the phone shows up the small icon for forwarding calls.
But i can not change the target for this feature on the phone. If i change it on the broadworks it works fine, but if i change the target-value of the line button it always keeps sending *72 and the number defined in the broadworks environment.

So what do i have to change in the phine setting, that it might send *72#### and the number i entered as value on the button?

I'm using the T46 with the firmware 28.73.193.45.
(This post was last modified: 05-11-2015 07:05 PM by fal.)
05-11-2015 07:03 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Elaine_Yealink Offline
Super Moderator
******

Posts: 152
Joined: Aug 2014
Reputation: 4
Post: #2
RE: Broadworks Call Forward Feature on a LineKey
Dear,

On Broadsoft version, we can directly dial *72+extension NO. to enable forward and *73+extension to disable.

I have a test locally by entering the extension on line button. When I press the line button, the phone sending out extension number correctly. Would you please send your config.bin to support@yealink.com so that we can have a check with your configuration.

Regards
Elaine
05-12-2015 06:37 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
fal Offline
Junior Member
**

Posts: 9
Joined: Jul 2014
Reputation: 0
Post: #3
RE: Broadworks Call Forward Feature on a LineKey
(05-12-2015 06:37 AM)Yealink_Elaine Wrote:  Dear,

On Broadsoft version, we can directly dial *72+extension NO. to enable forward and *73+extension to disable.

I have a test locally by entering the extension on line button. When I press the line button, the phone sending out extension number correctly. Would you please send your config.bin to support@yealink.com so that we can have a check with your configuration.

Regards
Elaine

Hi!

If i dial manually the *72 plus targetno. the forward enabled correctly.
I can also use the menu->features->call control->forward to setup the forward.
Is there a way to bind this submenu directly to a linekey-button?
05-12-2015 04:06 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  permisson to Call list on t46S ist denied wolfi30 1 288 03-04-2024 02:08 PM
Last Post: wolfi30
  permission denied to call list wolfi30 0 231 02-23-2024 08:54 PM
Last Post: wolfi30
  MP54 Call Forwarding pureit2018 0 496 11-23-2023 07:58 AM
Last Post: pureit2018
  Enhanced DSS Key - Conference Call joe1st 0 522 11-11-2023 05:27 AM
Last Post: joe1st
  Unable to Answer call without pressing Line 1 TheKirbyGroup 0 646 11-03-2023 11:04 PM
Last Post: TheKirbyGroup
  Yealink T28 setup audible ring on 2nd incoming call JeffWilkinson 20 86,334 10-18-2023 12:59 PM
Last Post: sles
  Picking up a call does not display Caller's Name oliv 0 1,299 04-19-2023 04:25 PM
Last Post: oliv
  keypad sequence for Forward & DND with Yealink W70B Base kargah 0 1,210 04-18-2023 10:07 PM
Last Post: kargah
  Yealink T27P -Incoming call issue rsarceno 0 1,248 01-25-2023 08:54 AM
Last Post: rsarceno
Information T27G call foward all Aerium 0 1,334 09-13-2022 04:36 PM
Last Post: Aerium

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication