[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Screen wakes on BLF activity (v81)
Author Message
celito Offline
DevOps Engineer
**

Posts: 16
Joined: Oct 2015
Reputation: 0
Post: #1
Bug Screen wakes on BLF activity (v81)
Along with the flashing power LED issue mentioned in this post already, we're having an issue after upgrading to v81 that the phone screen wakes up whenever a BLF user's status changes.

Here are the details from my testing.
  • Tested and confirmed on T46 and T48.
  • Phone screen wakes up regardless of if it has simply been dimmed from inactivity, or if the screensaver is on, or if it's in full on power saving mode with the screen off.
  • We do not use any of the audio or visual alerts for BLF pickup so those features are all turned off (features.pickup.blf_visual_enable and features.pickup.blf_audio_enable)
  • I tried turned the new intelligent mode feature off and it made no difference (features.power_saving.intelligent_mode)
  • Happens regardless of it currently being inside or outside of office hours

This is having a real negative impact because users are used to their phone waking up when they are receiving an actual call. Now it lights up every time any BLF key makes or receives a call.

Let me know if you need anything else tested, I would be happy to do it.

Thanks.
(This post was last modified: 11-10-2016 01:59 PM by celito.)
11-10-2016 01:59 PM
Find all posts by this user    like1    dislike0 Quote this message in a reply
Bahntechnik Offline
Junior Member
**

Posts: 27
Joined: Aug 2015
Reputation: 1
Post: #2
RE: Screen wakes on BLF activity (v81)
I can confirm this issue.
11-10-2016 02:38 PM
Find all posts by this user    like1    dislike0 Quote this message in a reply
complex1 Offline
3CX Adv. Cert. Engineer
*****

Posts: 1,509
Joined: Jan 2014
Reputation: 44
Post: #3
RE: Screen wakes on BLF activity (v81)
Quote:Now it lights up every time any BLF key makes or receives a call.
This is not a bug in my opinion.
I do really like this new feature. Smile Smile Smile

Kind regards,
Frank.

I am not an employee of Yealink.
Dutch is my native language, not English. Apologies for my imperfect grammar.
Please do not send unsolicited PM messages. I will not answer them.
11-10-2016 02:48 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
celito Offline
DevOps Engineer
**

Posts: 16
Joined: Oct 2015
Reputation: 0
Post: #4
RE: Screen wakes on BLF activity (v81)
(11-10-2016 02:48 PM)complex1 Wrote:  
Quote:Now it lights up every time any BLF key makes or receives a call.
This is not a bug in my opinion.
I do really like this new feature. Smile Smile Smile

Haha. I definitely like the idea of this being an option that can be turned on or off, just like features.pickup.blf_visual_enable and features.pickup.blf_audio_enable, but having it forced on for people who have no interest in seeing their phone light up unless their phone is actually ringing is key here. Smile
11-10-2016 02:59 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
complex1 Offline
3CX Adv. Cert. Engineer
*****

Posts: 1,509
Joined: Jan 2014
Reputation: 44
Post: #5
RE: Screen wakes on BLF activity (v81)
Not tested, but maybe is this what you are looking for?
features.blf_active_backlight.enable = 0

Kind regards,
Frank.

I am not an employee of Yealink.
Dutch is my native language, not English. Apologies for my imperfect grammar.
Please do not send unsolicited PM messages. I will not answer them.
11-10-2016 04:14 PM
Find all posts by this user    like2    dislike0 Quote this message in a reply
celito Offline
DevOps Engineer
**

Posts: 16
Joined: Oct 2015
Reputation: 0
Post: #6
RE: Screen wakes on BLF activity (v81)
(11-10-2016 04:14 PM)complex1 Wrote:  Not tested, but maybe is this what you are looking for?
features.blf_active_backlight.enable = 0

Nice! That did it. Tested on T48 with screen dim, screensaver, and power saver. Can I ask where you found that setting? It isn't in the v81 admin guide from what I can tell.
11-10-2016 04:34 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
complex1 Offline
3CX Adv. Cert. Engineer
*****

Posts: 1,509
Joined: Jan 2014
Reputation: 44
Post: #7
RE: Screen wakes on BLF activity (v81)
Quote:It isn't in the v81 admin guide from what I can tell.
I always read the Release Notes... there you can find it, on Page 118. Wink

# It enables or disables the IP phone to turn on the backlight or stop the screen saver when the BLF/BLF list status changes. 0-Disabled, 1-Enabled (default);

Kind regards,
Frank.

I am not an employee of Yealink.
Dutch is my native language, not English. Apologies for my imperfect grammar.
Please do not send unsolicited PM messages. I will not answer them.
11-10-2016 05:58 PM
Find all posts by this user    like1    dislike0 Quote this message in a reply
Bahntechnik Offline
Junior Member
**

Posts: 27
Joined: Aug 2015
Reputation: 1
Post: #8
RE: Screen wakes on BLF activity (v81)
@complex1

Thank you for your hint.

I can confirm, this parameter isn't part of v81 admin guide. But it's in the Excel file, which contains also all parameters with their values.
11-11-2016 08:42 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Evans Offline
Here to Help
**

Posts: 1
Joined: Feb 2017
Reputation: 0
Post: #9
RE: Screen wakes on BLF activity (v81)
I hope this post helps.

Workaround Instructions for T48G
- Log into the phone
- Click the Settings Tab
- Under the Preferences section, locate the Screensaver Wait Time setting
- Click the dropdown and choose a time period (I chose 6hr)
- Click the Confirm button
- If the phone display is on the screensaver, press the "X" button on the phone to wake the screen

Just keep tryin; you'll figure it out
02-21-2017 10:31 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  T42G - Stuck at Welcome screen Maciejp 1 757 12-22-2023 01:47 AM
Last Post: complex1
  exp43 Stuck on Wellcome Screen nolto 5 4,308 12-15-2023 02:48 PM
Last Post: sles
  T46U + EXP43 Stuck on Welcome Screen after update danantonielli 2 3,006 10-06-2023 10:04 PM
Last Post: roland@simplicloud.co.za
Photo T46G LED blinks when screen is off W 4 8,137 03-29-2023 05:36 AM
Last Post: matthewchubb
  T48U - how to remove the DND button from main screen ckatz@bluip.com 1 4,422 11-10-2021 12:05 AM
Last Post: sbrammer
Bug Transfer to Broadworks Network Directory Contacts - screen timeout issue livehappy42 0 2,667 10-27-2021 07:58 AM
Last Post: livehappy42
  T48U -- BLF and touch screen gvard 0 2,407 10-19-2021 04:16 PM
Last Post: gvard
  T42G - Stuck at Welcome screen clevoip 1 5,163 10-15-2021 01:28 AM
Last Post: complex1
  Ability to bypass number pad on T48 screen? celito 8 18,756 05-22-2020 03:08 PM
Last Post: cwatts@deltamodtech.com
  Screen Saver in T43U Jorge Luis 0 3,810 01-31-2020 05:17 PM
Last Post: Jorge Luis

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication