[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 1 Votes - 4 Average
  • 1
  • 2
  • 3
  • 4
  • 5
UC-ONE feature for T48G
Author Message
flatman Offline
Junior Member
**

Posts: 15
Joined: Feb 2015
Reputation: 0
Post: #1
UC-ONE feature for T48G
Hello,

i'm having an issue with the UC-ONE feature for the T48G phone.
I have enabled it using the following parameters:

###Only T46G/T48G Models support these parameter

features.uc_enable = 1
features.uc_password = xxxxxx
features.uc_username = xxxxxxxx@ccc


However when i go to the Buddies feature on the phone, i dont see my list of buddies that are in the client. However. When i click the DND feature in UC-client, I can see it effecting the phone....so that tells me that its somewhat working. Can anyone explain why only the DND feature works for the uc-feature?

I should be able to see my buddy-list.

any help would be greatly appreciated.
(This post was last modified: 04-02-2015 01:56 AM by flatman.)
04-02-2015 01:55 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Flora_Yealink Offline
Senior Member
****

Posts: 265
Joined: Oct 2012
Reputation: 4
Post: #2
RE: UC-ONE feature for T48G
Hello,
Please let us know which version of T48 you have and we have guide about the feature
http://www.yealink.com/Upload/UCOne/feat...9_v1.0.pdf
please first refer to it and then I will check internal to see what may cause the issue .
Best Regards!

Flora
FAE (Field Application Engineer) Department
Yealink Network Technology Co., Ltd.
Website: http://www.yealink.com
04-02-2015 06:06 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Flora_Yealink Offline
Senior Member
****

Posts: 265
Joined: Oct 2012
Reputation: 4
Post: #3
RE: UC-ONE feature for T48G
Hello ,
I have tested the UC feature in my side it can work well with phone version 35.73.193.10, after enabled the UC feature and configured the UC account and password , it shows All Buddies and the related contact info.
Please check whether the account information is correct or not. and I have checked, it only have these states , available , away , busy , offline , would you please let us know more details about " When i click the DND feature in UC-client, I can see it effecting the phone"?.
Thanks.

Flora
FAE (Field Application Engineer) Department
Yealink Network Technology Co., Ltd.
Website: http://www.yealink.com
04-02-2015 10:54 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
flatman Offline
Junior Member
**

Posts: 15
Joined: Feb 2015
Reputation: 0
Post: #4
RE: UC-ONE feature for T48G
(04-02-2015 10:54 PM)Flora Wrote:  Hello ,
I have tested the UC feature in my side it can work well with phone version 35.73.193.10, after enabled the UC feature and configured the UC account and password , it shows All Buddies and the related contact info.
Please check whether the account information is correct or not. and I have checked, it only have these states , available , away , busy , offline , would you please let us know more details about " When i click the DND feature in UC-client, I can see it effecting the phone"?.
Thanks.



i'm using the latest version : 35.73.193.50

when i said --" When i click the DND feature in UC-client, I can see it effecting the phone"-----I was trying to say that the client is in-fact able to communicate with the phone, but only the DND feature is work...I still cannot see the buddy-list on the phone.

(04-02-2015 10:54 PM)Flora Wrote:  Hello ,
I have tested the UC feature in my side it can work well with phone version 35.73.193.10, after enabled the UC feature and configured the UC account and password , it shows All Buddies and the related contact info.
Please check whether the account information is correct or not. and I have checked, it only have these states , available , away , busy , offline , would you please let us know more details about " When i click the DND feature in UC-client, I can see it effecting the phone"?.
Thanks.



you stated you tested on 35.73.193.10....however on your site I don't see this version... I only see 35.72.193.10


can you confirm the version you were testing?
(This post was last modified: 04-03-2015 09:24 PM by flatman.)
04-03-2015 09:18 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Flora_Yealink Offline
Senior Member
****

Posts: 265
Joined: Oct 2012
Reputation: 4
Post: #5
RE: UC-ONE feature for T48G
Sorry, I used the old version 35.73.0.10 version to do test and now I upgrade it to the latest version 35.73.193.50 and the test result is good, the phone can show the buddy list after I enabled the UC feature and configured the UC account.

when i said --" When i click the DND feature in UC-client, I can see it effecting the phone"-----I was trying to say that the client is in-fact able to communicate with the phone, but only the DND feature is work...I still cannot see the buddy-list on the phone.
You mean you enabled the DND feature , the presence of the account will turn to DND? Have you checked the Link in my first reply ?
Whether you can change the presence of the account for example away, busy , offline, available through both the UC clinet and the phone side ?

Best Regards!
flora

Flora
FAE (Field Application Engineer) Department
Yealink Network Technology Co., Ltd.
Website: http://www.yealink.com
04-03-2015 10:50 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
flatman Offline
Junior Member
**

Posts: 15
Joined: Feb 2015
Reputation: 0
Post: #6
RE: UC-ONE feature for T48G
(04-03-2015 10:50 PM)Flora Wrote:  Sorry, I used the old version 35.73.0.10 version to do test and now I upgrade it to the latest version 35.73.193.50 and the test result is good, the phone can show the buddy list after I enabled the UC feature and configured the UC account.

when i said --" When i click the DND feature in UC-client, I can see it effecting the phone"-----I was trying to say that the client is in-fact able to communicate with the phone, but only the DND feature is work...I still cannot see the buddy-list on the phone.
You mean you enabled the DND feature , the presence of the account will turn to DND? Have you checked the Link in my first reply ?
Whether you can change the presence of the account for example away, busy , offline, available through both the UC clinet and the phone side ?

Best Regards!
flora



When I change the status on the UC-client it does not effect the phone. When the only thing that effects the phone is the DND-feature when clicked on the UC-client.

I also tried to set the Status to Available on the phone, manually, but when i do this the phone says "Set Failed"

Do you know what i would get that message when trying to set the Status on the phone?
(This post was last modified: 04-04-2015 12:14 AM by flatman.)
04-03-2015 11:14 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
flatman Offline
Junior Member
**

Posts: 15
Joined: Feb 2015
Reputation: 0
Post: #7
RE: UC-ONE feature for T48G
(04-03-2015 11:14 PM)flatman123 Wrote:  
(04-03-2015 10:50 PM)Flora Wrote:  Sorry, I used the old version 35.73.0.10 version to do test and now I upgrade it to the latest version 35.73.193.50 and the test result is good, the phone can show the buddy list after I enabled the UC feature and configured the UC account.

when i said --" When i click the DND feature in UC-client, I can see it effecting the phone"-----I was trying to say that the client is in-fact able to communicate with the phone, but only the DND feature is work...I still cannot see the buddy-list on the phone.
You mean you enabled the DND feature , the presence of the account will turn to DND? Have you checked the Link in my first reply ?
Whether you can change the presence of the account for example away, busy , offline, available through both the UC clinet and the phone side ?

Best Regards!
flora



When I change the status on the UC-client it does not effect the phone. When the only thing that effects the phone is the DND-feature when clicked on the UC-client.

I also tried to set the Status to Available on the phone, manually, but when i do this the phone says "Set Failed"

Do you know what i would get that message when trying to set the Status on the phone?


Hello Flora, any update on this issue? **just following-up**
04-05-2015 04:56 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
flatman Offline
Junior Member
**

Posts: 15
Joined: Feb 2015
Reputation: 0
Post: #8
RE: UC-ONE feature for T48G
(04-05-2015 04:56 AM)flatman123 Wrote:  
(04-03-2015 11:14 PM)flatman123 Wrote:  
(04-03-2015 10:50 PM)Flora Wrote:  Sorry, I used the old version 35.73.0.10 version to do test and now I upgrade it to the latest version 35.73.193.50 and the test result is good, the phone can show the buddy list after I enabled the UC feature and configured the UC account.

when i said --" When i click the DND feature in UC-client, I can see it effecting the phone"-----I was trying to say that the client is in-fact able to communicate with the phone, but only the DND feature is work...I still cannot see the buddy-list on the phone.
You mean you enabled the DND feature , the presence of the account will turn to DND? Have you checked the Link in my first reply ?
Whether you can change the presence of the account for example away, busy , offline, available through both the UC clinet and the phone side ?

Best Regards!
flora



When I change the status on the UC-client it does not effect the phone. When the only thing that effects the phone is the DND-feature when clicked on the UC-client.

I also tried to set the Status to Available on the phone, manually, but when i do this the phone says "Set Failed"

Do you know what i would get that message when trying to set the Status on the phone?


Hello Flora, any update on this issue? **just following-up**



Hello Yealink team; just following up . If you have a moment, please advise.
we're still having trouble viewing the buddy-list on the phone. We have the correct credentials /parameters in-place.
04-06-2015 09:17 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
flatman Offline
Junior Member
**

Posts: 15
Joined: Feb 2015
Reputation: 0
Post: #9
RE: UC-ONE feature for T48G
(04-06-2015 09:17 PM)flatman123 Wrote:  
(04-05-2015 04:56 AM)flatman123 Wrote:  
(04-03-2015 11:14 PM)flatman123 Wrote:  
(04-03-2015 10:50 PM)Flora Wrote:  Sorry, I used the old version 35.73.0.10 version to do test and now I upgrade it to the latest version 35.73.193.50 and the test result is good, the phone can show the buddy list after I enabled the UC feature and configured the UC account.

when i said --" When i click the DND feature in UC-client, I can see it effecting the phone"-----I was trying to say that the client is in-fact able to communicate with the phone, but only the DND feature is work...I still cannot see the buddy-list on the phone.
You mean you enabled the DND feature , the presence of the account will turn to DND? Have you checked the Link in my first reply ?
Whether you can change the presence of the account for example away, busy , offline, available through both the UC clinet and the phone side ?

Best Regards!
flora



When I change the status on the UC-client it does not effect the phone. When the only thing that effects the phone is the DND-feature when clicked on the UC-client.

I also tried to set the Status to Available on the phone, manually, but when i do this the phone says "Set Failed"

Do you know what i would get that message when trying to set the Status on the phone?


Hello Flora, any update on this issue? **just following-up**



Hello Yealink team; just following up . If you have a moment, please advise.
we're still having trouble viewing the buddy-list on the phone. We have the correct credentials /parameters in-place.



I have another question. The information sent from the UC-client to the T48G..I'm assuming the events are transported via TCP correct? or is it UDP?
04-06-2015 11:20 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
flatman Offline
Junior Member
**

Posts: 15
Joined: Feb 2015
Reputation: 0
Post: #10
RE: UC-ONE feature for T48G
(04-06-2015 11:20 PM)flatman123 Wrote:  
(04-06-2015 09:17 PM)flatman123 Wrote:  
(04-05-2015 04:56 AM)flatman123 Wrote:  
(04-03-2015 11:14 PM)flatman123 Wrote:  
(04-03-2015 10:50 PM)Flora Wrote:  Sorry, I used the old version 35.73.0.10 version to do test and now I upgrade it to the latest version 35.73.193.50 and the test result is good, the phone can show the buddy list after I enabled the UC feature and configured the UC account.

when i said --" When i click the DND feature in UC-client, I can see it effecting the phone"-----I was trying to say that the client is in-fact able to communicate with the phone, but only the DND feature is work...I still cannot see the buddy-list on the phone.
You mean you enabled the DND feature , the presence of the account will turn to DND? Have you checked the Link in my first reply ?
Whether you can change the presence of the account for example away, busy , offline, available through both the UC clinet and the phone side ?

Best Regards!
flora



When I change the status on the UC-client it does not effect the phone. When the only thing that effects the phone is the DND-feature when clicked on the UC-client.

I also tried to set the Status to Available on the phone, manually, but when i do this the phone says "Set Failed"

Do you know what i would get that message when trying to set the Status on the phone?


Hello Flora, any update on this issue? **just following-up**



Hello Yealink team; just following up . If you have a moment, please advise.
we're still having trouble viewing the buddy-list on the phone. We have the correct credentials /parameters in-place.



I have another question. The information sent from the UC-client to the T48G..I'm assuming the events are transported via TCP correct? or is it UDP?






Flora, To answer your question. "Whether you can change the presence of the account for example away, busy , offline, available through both the UC clinet and the phone side ?"

The answer is no, setting the status on the UC-Client does not effect the phone. The only thing that effects the phone is when I click the DND button on the UC-Client"
04-07-2015 12:58 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  T48G call problems - asking to press digit ozimarco 1 142 12-09-2024 03:52 PM
Last Post: ozimarco
  T48G Wallpaper and JPG artifacts haohmaru 2 8,038 10-30-2024 08:13 PM
Last Post: morozg05
  T48G/T49G on Ring Central? Gordon 2 10,977 12-27-2023 10:38 AM
Last Post: jseeley
  T48G Top row keypad buttons requiring too much pressure after time Chris708 4 11,819 11-16-2023 01:08 AM
Last Post: here4real
  T48G Connected handset not answering or ending call with connected handset. Pettis 4 4,855 07-27-2023 05:38 AM
Last Post: Lissvazquez
  T43U using L2TP VPN feature kaausc 0 1,814 06-22-2023 02:58 AM
Last Post: kaausc
  Does T4XU supports DD Phone Feature? kevinschlemmer 0 2,124 12-06-2022 10:48 PM
Last Post: kevinschlemmer
  T48G + EHS36 +Janra engage 75 not hanging up call kris.hetherington@firstsource.com 1 6,458 09-30-2022 03:23 AM
Last Post: knewgent
  T48G - TLS 1.2 Support for 3CX Futureweb 1 3,817 09-30-2022 12:55 AM
Last Post: complex1
  Feature Request T46G - Return to page 1 imfloridaguy 4 13,704 08-30-2021 12:34 AM
Last Post: eric@hudsonvalleygeek.com

Forum Jump:


User(s) browsing this thread:

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication