[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
DND probs with Broadsoft
Author Message
Digicel AFG Offline
Junior Member
**

Posts: 9
Joined: Dec 2014
Reputation: 0
Post: #1
Exclamation DND probs with Broadsoft
Hello,

We encounter a problem when using the DND on our phones and T42 T46.

We did an upgrade of frimware:

T42: 29.73.193.50

T46: 28.73.193.50

We used Commes PBX: BroadSoft r.18 sp1

On the phone when we activate the DND function, we continue to receive calls. It would cause to say that the DND feature is not activated on the phone.

Would there be a way to fix this?

Regards.

Digicel AFG
03-26-2015 10:36 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yealink_Peter Offline
Super Moderator
******

Posts: 141
Joined: Nov 2014
Reputation: 2
Post: #2
RE: DND probs with Broadsoft
Hi Digicel,

Can you see the DND icon lighted at the right top corner of LCD?
Do all numbers can call in? or just for some? As we know, if we enable the DND Emergency, the DND authorized numbers still can call in.

Thank you.
Regards,
Peter
03-26-2015 11:09 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Digicel AFG Offline
Junior Member
**

Posts: 9
Joined: Dec 2014
Reputation: 0
Post: #3
RE: DND probs with Broadsoft
Hi Yealink_Peter,

Can you see the DND icon lighted at the right top corner of LCD?

=> Yes, we see the DND icon lighted at the right top corner of LCD

Do all numbers can call in? or just for some?

=> All incoming calls external and internal

As we know, if we enable the DND Emergency, the DND authorized numbers still can call in.

=> DND Emergency is disabled.


Regards.

Digicel AFG
03-27-2015 03:49 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yealink_Peter Offline
Super Moderator
******

Posts: 141
Joined: Nov 2014
Reputation: 2
Post: #4
RE: DND probs with Broadsoft
Hi Digicel,

It seems strange! Is there another phone with the same firmware performs properly?
Perhaps you can try resetting one phone to factory test.
If still persists after resetting, please upload the syslog at level 6, config.bin, PCAP trace.

Thank you.
Regards,
Peter
03-27-2015 04:32 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Digicel AFG Offline
Junior Member
**

Posts: 9
Joined: Dec 2014
Reputation: 0
Post: #5
Sad RE: DND probs with Broadsoft
Hi Yealink_Peter,

It seems strange! Is there another phone with the same firmware performs properly?
Perhaps you can try resetting one phone to factory test.

=> All the phone do the same.

=> Same with factory test

=> We test with a new phone : put the new firmware, add a account on it (in this case, we don't use the auto provisionning, select DND, test an incomming call) => DND doesn't work, we receive incomming call (DND emergency disabled)

If still persists after resetting, please upload the syslog at level 6, config.bin, PCAP trace.

=> All the file are attached

Regards.

Digicel AFG


Attached File(s)
.pcap  29.73.193.40_19_24_10.pcap (Size: 46.39 KB / Downloads: 3)
.tar  syslog.tar (Size: 1,018 KB / Downloads: 1)
.zip  001565774f3d-all.zip (Size: 1.62 KB / Downloads: 6)
03-28-2015 03:28 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yealink_Peter Offline
Super Moderator
******

Posts: 141
Joined: Nov 2014
Reputation: 2
Post: #6
RE: DND probs with Broadsoft
Hi Digicel,

Thank you for your information.
We will escalate to our R&D for analyzing, any feedback I will let you know.

Thanks.
Regards,
Peter
04-02-2015 09:52 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yealink_Peter Offline
Super Moderator
******

Posts: 141
Joined: Nov 2014
Reputation: 2
Post: #7
RE: DND probs with Broadsoft
Hi Digicel,

We find that we need the config.bin file rather than the 001565774f3d-all.zip, would you please export the config.bin file again to us?
   
You can send the file to peter@yealink.com or upload in this thread.

Thank you.
Regards,
Peter
04-04-2015 10:49 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Digicel AFG Offline
Junior Member
**

Posts: 9
Joined: Dec 2014
Reputation: 0
Post: #8
Thumbs Up RE: DND probs with Broadsoft
Hi Peter,

We tested the recommendation that you send us :

"
Please go to the phone WUI/Features/General Information/, and disable the "Feature Key Synchronization".
When this feature is enable, the phone will sync the DND&Forward status with the server, it is the server block or forward calls.
Also you can disable this feature via auto provision:
bw.feature_key_sync = 0
"

It works perfectly. The phone does not ring, it just says that we have received a call.

We will added directly in our provisioning file.

Thank you for your support.

Best Regards.

Digicel AFG
04-07-2015 10:03 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  T46S auto redial does not work / Broadsoft hinken 1 4,186 12-04-2019 08:00 AM
Last Post: Travis_Yealink
  Yealink - Broadsoft IM&P integration ElliotJ29 2 8,055 10-12-2016 03:47 PM
Last Post: KPatricia
  Broadsoft/T49G sip ports error davem2626 1 4,587 05-07-2016 06:21 AM
Last Post: Karl_Yealink
  call park with broadsoft on t46g jeff.wilde@parkregion.com 2 6,100 04-28-2016 02:03 AM
Last Post: jeff.wilde@parkregion.com
  Broadsoft day/night BLF nazg82 1 3,900 01-19-2016 11:54 PM
Last Post: Karl_Yealink
  T46G and Broadsoft Problem wokkel99 1 4,185 10-09-2015 04:20 PM
Last Post: James_Yealink
  T4X Broadsoft Solution new firmware release notes grudge 3 6,382 06-24-2014 03:38 PM
Last Post: Yealink Support
  Broadsoft ACD feature with Yealink T4x acantho 9 23,182 05-03-2014 11:05 AM
Last Post: Yealink Support
  BLF with Broadsoft on T41P acantho 3 11,277 04-17-2014 11:14 AM
Last Post: Yealink Support
  Enable BLF for Broadsoft CraigFox 11 25,821 03-03-2014 01:54 PM
Last Post: Yealink Support

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication