T46 and T42G - Elastix

[B-C]

Couple of features not working as expected.

Intercom and BLF Directed Pickup.

Intercom -
setup a DSSKey for intercom and it just rings once at remote side but keeps ringing at origination.

our paging key is *80 in FreePBX (Elastix) is the phone programmed somewhere for *9? - How would I change / Modify this?

BLF Directed Pickup on EXP40 working but from a T42 not quite getting that right.
possibly an elastix issue.

currently have operator ext as 0 - elastix not really thrilled with this however its working, but other users often need to answer a ringing ext 0 and a directed pickup or BLF pickup would work - they can often hear it ringing.

from the ext 0 (T46G) doing the setup correctly Value <ext#> Extension ** for directed pickup seems to work great. - just not from the T42Gs.

[Elaine_Yealink]

Dear,
To auto answer the intercom, we need to enable Accept Intercom under Features--Intercom page on the web interface. To change the paging code, please go to DSSkey page, on the one which is set to Intercom, change the value to *80+extension. See below pictures for details
EXP 40 only works with T46/T48, but not T42. So I think it is because of the compatibility.

Regards
Elaine

[B-C]

It works fine when dialing *80ext
Just not from the keys. Auto answer is enabled

Will change per info provided and test.

Exp only being tested with 46g
T42g was just using existing dsskeys.

[B-C]

okay testing that now..

Not sure why you'd have an intercom option if it didn't already include a *code anyway - but I'll take this option..

is there away / option to do a Intercom Call Annouce?
our old system - legend - would use system voice (Intercom)
basically answer - hit transfer - hit user button on adjuct - immdiately connected to intercom - announce call - then hangup
might have been hit hold - because it was only for a few recipients that this was done for - all others just answer - hit their button - hang up and call is passed through normally (blind transfer)

[B-C]

That did work from 46g..
Using both dsskey local and ext40..

Think there is a different issue on the other one.