[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
T28P DSS Keys
Author Message
cmassoc Offline
Junior Member
**

Posts: 2
Joined: Mar 2015
Reputation: 0
Post: #1
T28P DSS Keys
I have 6 total phones in my office and have everyone's extensions are programmed as DSS keys 1 through 6. Is there a way for me to tell which extensions are on the phone when the phone rings so I know if someone is available to answer the line. Thank you for your help.
03-20-2015 02:42 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Flora_Yealink Offline
Senior Member
****

Posts: 265
Joined: Oct 2012
Reputation: 4
Post: #2
RE: T28P DSS Keys
Hello ,
In this case, we would suggest you can use the BLF feature, for example there are 6 people in your office, and their extension are 100, 101, 102,103,104,105,106 and you use the extension 100, then you configure the BLF keys to monitor other extensions
so if the extension 101 is in a call , the BLF keys configured in the phone which monitor extension will be in red.
For more details, you can refer to the user guide.
http://www.yealink.com/Upload/UCOne/2014...V73_40.pdf
please check and let us know if any question .
Best Regards!
Flora

Flora
FAE (Field Application Engineer) Department
Yealink Network Technology Co., Ltd.
Website: http://www.yealink.com
03-20-2015 03:39 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
cmassoc Offline
Junior Member
**

Posts: 2
Joined: Mar 2015
Reputation: 0
Post: #3
RE: T28P DSS Keys
Flora,
Thank you for the response. This is the way that we have the phones setup now. When no one is on the line the LEd's are unlit, when someone is on the line it is red. When a call comes in all the BLF's flash as green so you are unable to tell who is on the phone in the office unless you were looking at it before the call. The persons led that was lit in red is now flashing green due to the incoming call. Is there anyway to change this or another way I should setup the phones to work more efficiently?
08-13-2015 10:00 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
Question T58A with Camera use DSS Keys / EDS Keys .... juergensuehl 0 2,273 01-13-2022 07:54 PM
Last Post: juergensuehl
  T29G BLF Keys going dark rjhartman68 0 4,941 04-10-2019 02:59 PM
Last Post: rjhartman68
  T58V disable dss keys to interrupt screensaver jochen 1 6,711 06-02-2017 01:22 PM
Last Post: Lucia_Yealink
  Lock DSSKEY on phone t28p rafaelnetto 1 7,763 11-14-2016 06:30 AM
Last Post: Leah_Yealink
  T46G - lost DSS 1 - 9 keys only office@travelpro 3 11,890 02-19-2016 02:36 AM
Last Post: office@travelpro
  T26P/T28p BLF light not working after firmware upgrade futures 2 14,727 01-27-2016 11:29 PM
Last Post: janduy.manzanos@gmail.com
  T28P and the auth-user-pass mistery spectrum 6 17,937 03-28-2015 05:32 AM
Last Post: James_Yealink
  v2.72.0.30 and T28P BLF lights arainc 8 21,025 11-13-2014 04:52 AM
Last Post: arainc
  T28P calls go to speaker Santi 3 10,643 11-10-2014 10:51 AM
Last Post: Lucas1
  YEalink T28p v 2.72.0.30 fabster 7 19,038 10-28-2014 09:42 AM
Last Post: Yealink_Jim

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication