[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
DHCP issues with V73
Author Message
papachumba Offline
Junior Member
**

Posts: 3
Joined: Mar 2015
Reputation: 0
Post: #1
DHCP issues with V73
Just tried upgrading one of the t-22 phones we have in the office to 7.73.0.50.
Upon reboot, the phone does not want to get the IP address via DHCP, and just stays on the screen saying "obtaining IP address".
I have left it on here for longer than 10 minutes, the message doesnt go away.
I tried restarting the phone several times, no effect.
I tried connecting a power supply to the phone, then disconnecting the network cable and plugging it back in - the page refreshes and the phone obtains the new IP via DHCP. This seems to be the only trick to get DHCP to issue an IP to the phone.

I then tried both .50 and .40 versions of v73 firmwares you have available, both are exhibiting this problem, tested on several t-22 phones. Each time after the firmware update and a reboot the phone will get stuck on "obtaining IP address" screen.

I then downgraded the phone to 7.72.0.80 and upon a reboot the phone obtained the IP via DHCP without issues.
03-17-2015 11:10 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Flora_Yealink Offline
Senior Member
****

Posts: 265
Joined: Oct 2012
Reputation: 4
Post: #2
RE: DHCP issues with V73
Hello ,
We have tested it here with two T22s but both them can work well, after upgrade to 7.73.0.50 , it can obtain the IP address when back to idle states, if reboot the phone again, it can obtain the IP address as well.
in this case, would you please send us config.bin file, pcap trace and level 6 syslog that we can submit them to the R&D for debug ?
since the phone can work well with version 7.72.0.80 , please send us the same information about V72 as well.
please send them to support@yealink.com.
Best Regards!
Flora

Flora
FAE (Field Application Engineer) Department
Yealink Network Technology Co., Ltd.
Website: http://www.yealink.com
03-18-2015 02:49 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
tsukraw Offline
Member
***

Posts: 145
Joined: Jan 2014
Reputation: 3
Post: #3
RE: DHCP issues with V73
Just one idea.
Do you have Option 66 configured on your DHCP server?
What device is dealing out your DHCP?

We saw a similar issue on V73 where our dhcp had option 66 and the phones would not obtain a IP for whatever reason. We removed option 66 the issue went away.

We experiences this at 3 different locations. Each of the 3 were small installs a dozen or so phones so we jsut left option 66 out and if they get a new phone just manually put in the provisioning URL.

Let i said just a thought to try.
04-01-2015 07:06 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Flora_Yealink Offline
Senior Member
****

Posts: 265
Joined: Oct 2012
Reputation: 4
Post: #4
RE: DHCP issues with V73
Hi
We didn't use the option 66 in the DHCP server normally, the option 66 used when the phone need do auto provision from DHCP server, in this case, the phone will go to auto provision from the Ip address configured in the option 66.
Best Regards!
Flora
04-22-2015 05:42 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
rfrantik@rfcinc.com Offline
Junior Member
**

Posts: 31
Joined: Jan 2013
Reputation: 0
Post: #5
RE: DHCP issues with V73
Flora,

I think you need to test with a larger sample of phones. We have tested the V73.0.50 on the T26 phones and we find about 2 in 10 exhibit this problem of NOT getting an IP address. They just sit on the screen saying "obtaining IP address". In particular we were testing on our POE switch... so pulling the Ethernet cord and plugging it back in didn't help. We too had to plug in a power brick, pull the Ethernet, plug the Ethernet back in and then it would get an IP address.

It's like this new firmware has a very small window in which to grab the DHCP address and some phones just don't come on line in time.

We downgraded all of our phones in the field to a v72 build.

Please let us know when you have this issue fixed on V73.
06-03-2015 02:19 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Flora_Yealink Offline
Senior Member
****

Posts: 265
Joined: Oct 2012
Reputation: 4
Post: #6
RE: DHCP issues with V73
Thanks for your information .
in this case, would you please send us config.bin file, pcap trace and level 6 syslog that we can submit them to the R&D for debug ?
since the phone can work well with version 7.72.0.80 , please send us the same information about V72 as well.
You can refer to below link for how to catch these information.
http://forum.yealink.com/forum/showthread.php?tid=1319
Best Regards!
Flora
06-04-2015 05:35 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
papachumba Offline
Junior Member
**

Posts: 3
Joined: Mar 2015
Reputation: 0
Post: #7
RE: DHCP issues with V73
Hiya, this happens with latest firmware too.
Phone will stay idling saying "obtaining IP address" forever.

Fix: If pull the lan cable from the phone, and plug it back in - it will pickup the ip address and start working. If i reboot the phone, back to "obtaining IP" until you disconnect the cable and plug back in...

I found this happening on our corporate network as well as our home user who has a normal fibre router at home.
07-10-2015 06:29 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Chris-LU Offline
Junior Member
**

Posts: 7
Joined: Jul 2015
Reputation: 0
Post: #8
RE: DHCP issues with V73
Have same issue -> No IP with DHCP at latest firmware.
Downgrade to latest v72 and DHCP works again.

Tested witd option 66 disabled -> No IP
Tested with DHCP and power supply -> No IP
Manual IP with VLAN -> Phone is reachable.

Setup:
T46G new
Cisco POE-Switch with vlan 10(DHCP) untagged and 200(voip) tagged
Phones get ip from dhcp in untagged lan 10 with tftp-information from option 66. Autoprovisioning set phones to vlan200 with new static ip. That works with 15+ phones at v72.
07-22-2015 07:57 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Chris-LU Offline
Junior Member
**

Posts: 7
Joined: Jul 2015
Reputation: 0
Post: #9
RE: DHCP issues with V73
Same issue with latest 28.80.0.70 -> No DHCP! No sollution???
08-20-2015 05:04 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Chris-LU Offline
Junior Member
**

Posts: 7
Joined: Jul 2015
Reputation: 0
Post: #10
RE: DHCP issues with V73
Hard work to find out the error! Disabled the "Smartport"-Feature in Cisco-Switch, disable lldp on Phone and now it runs!

I dont know what the problem is... in old firmware there was no problem!

If i set phone to vlan200 and manual ip, i reach the phone.
If i disable vlan configuration and set IP in our pc net (which is normaly no problem because untagged vlan10) i can't reach the phone.

The Cisco switch smartport-feature set additional port-settings, but if i manual set this options... no problem.

interface fastethernetXX
port security max 10
port security mode max-addresses
port security discard trap 60
macro description ip_phone_desktop

Only setting i not tested was " spanning-tree portfast".

Why is lldp standard enabled? Should be disabled!
(This post was last modified: 08-20-2015 09:22 PM by Chris-LU.)
08-20-2015 08:26 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  V73b Firmware issues David_Bremek 7 24,688 12-18-2014 05:06 PM
Last Post: Yealink_Jim

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication