[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
*Resolved* BLF Failback to Primary Server - DNS-SRV
Author Message
Bryan Nelson Offline
Member
***

Posts: 71
Joined: Feb 2013
Reputation: 0
Post: #1
*Resolved* BLF Failback to Primary Server - DNS-SRV
---Original Message bounced back form support@yealink.com-----

Hello,

We are having an issue with BLF status subscriptions when combined with the DNS-SRV functionality. The BLF keys will work fine until the phone utilizes the secondary server listed in the DNS-SRV record. After registering to the secondary server, all 200 ok responses to notify events are sent to the secondary server, even if the phone has reverted back to its primary registration.

Without the 200 ok responses, our server will queue up further notify events to avoid a "notify storm" on the phones end(the server assumes the phone is lagging behind the notify events.)

Is there any way to lock the BLF subscription to a specific server address, rather than use the line registration SRV record? Polycom phones had a similar issue, and we were able to specify an a-record lookup for the BLF subscription separately from the line registration server address.

I have attached the pcap\config\logs from the phone -- A T-26. Let me know if you need anything else from me to help identify this problem.


Attached File(s)
.pcap  6.70.0.130_14-57-6.pcap (Size: 187.18 KB / Downloads: 2)
.tar  syslog (32).tar (Size: 569.5 KB / Downloads: 2)
(This post was last modified: 02-07-2015 06:04 AM by Bryan Nelson.)
04-16-2013 07:03 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Bryan Nelson Offline
Member
***

Posts: 71
Joined: Feb 2013
Reputation: 0
Post: #2
RE: BLF Failback to Primary Server - DNS-SRV
Would setting the out-of-dialog BLF to enabled help in this situation? Upgrading to 70.140 did not seem to help, but I dont' know if it addressed in the upgrade. Are there specific release notes for each firmware revision?
04-17-2013 03:03 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Bryan Nelson Offline
Member
***

Posts: 71
Joined: Feb 2013
Reputation: 0
Post: #3
RE: BLF Failback to Primary Server - DNS-SRV
This is an old thread, but we did find a solution thanks to Yealink's support team!

Setting the phone to use the outbound proxy, set to the same SRV address will resolve the issue. Basically, this will force BLF requests to be "proxied" to the SRV address, rather than just continuing the current subscription after failover to the backup server.
02-07-2015 06:03 AM
Find all posts by this user    like1    dislike0 Quote this message in a reply
Agrajag Offline
Junior Member
**

Posts: 8
Joined: Sep 2015
Reputation: 0
Post: #4
RE: *Resolved* BLF Failback to Primary Server - DNS-SRV
I'm having a similar issue with my 46G. I'm trying to get it to work with ThinkingPhones (they basically only support Polycom phones) and I had it working flawlessly. Then, suddenly, the account would register but it would no longer receive calls. Soft phone tests work just fine, but NOT this phone. It's to a point where I'm thinking of returning the phone for another brand.

I do the exact above work-around. However, at some point the phone dumped to their backup server which does not allow for outbound calling. Now, no matter what we try, the phone will not get off the backup server. It's forever stuck using it.
10-18-2015 02:35 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
davebenwell Offline
Junior Member
**

Posts: 7
Joined: Nov 2015
Reputation: 0
Post: #5
RE: *Resolved* BLF Failback to Primary Server - DNS-SRV
Did you resolve this?
11-11-2015 09:12 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  how to connect yealink T23G to mikrotik openvpn server m.taghavi 4 10,899 10-11-2020 11:31 AM
Last Post: bozko
  T22P -0 3CX firmware web server fails preterion 1 7,067 04-17-2018 02:35 PM
Last Post: will3
  Enter SIP Server on phone interface afsfwmw90rfj 10 21,298 06-01-2017 04:55 PM
Last Post: complex1
  T26P: Does not register at the asterisk server on 5060 port but on 5062, 5063 etc. dimangelid 6 29,442 06-09-2015 05:04 PM
Last Post: carlo.passet
  Call pickup on BLF not working on 7.72.0.1 [resolved 7.72.0.56.rom] temp0001 26 77,726 03-02-2015 07:48 AM
Last Post: temp0001
Bug Music Server URI not working in T28P series with firmware version 2.72.0.80 rahulpanwar 4 15,227 12-09-2014 09:39 PM
Last Post: rahulpanwar
  T26P : Sip Server 2 -> No More BLF docteurmicro50 7 15,099 11-18-2014 09:04 PM
Last Post: Wilson_Yealink
  T26 sends subscribe requests to SIP port 5060 but SIP server port is 37584 fernando.lagper 2 9,959 03-13-2014 04:00 PM
Last Post: Yealink Support
  How To: Dial URL via SIP server on SIP-T20P ruiseixas 2 13,515 05-16-2013 07:46 PM
Last Post: ruiseixas
  ***Warning*** message from Mac Pro Server rfrantik@rfcinc.com 2 13,461 04-19-2013 04:51 AM
Last Post: psichel

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication