New Forum system requires email address which you used to apply for your account to replace your original username. Password stays the same.Please see this post for more details
http://forum.yealink.com/forum/showthread.php?tid=40344

Yealink Test Club has been officially launched. Please visit post below to get detail information. Come and join us!
http://forum.yealink.com/forum/announcements.php?aid=18

We just had the YMCS online and we are also working on the features plan on the future versions, in this regard we are need to hear your voice about the YMCS.
Please visit : http://forum.yealink.com/forum/showthread.php?tid=42322


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
802.1 x Mode Problem
Author Message
Digicel AFG Offline
Junior Member
**

Posts: 9
Joined: Dec 2014
Reputation: 0
Post: #1
802.1 x Mode Problem
Hello,

We encounter a problem when configuring 802.1x on network advanced level.

On the IP phone T32G and T28G the only 802.1x mode available is: EAP-MD5

This mode is unfortunately not compatible with your network.

In fact we use PEAP-MSCHAPv2 802.1x mode with CA certificates.

Failure to use this mode phones does not allow us to use on our network.

Is there a new frimware or new version of software that would allow us to solve this problem?

For the moment, we have for T38G:

- Frimware Version : 38.70.1.33

- Hardware Version : 21.3.4.160.64.0.0

For the moment, we have for T32G:

- Frimware Version : 32.70.0.185

- Hardware Version : 22.1.2.32.0.0.0

Regards.

Digicel AFG
03-06-2015 03:53 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
James_Yealink Offline
Administrator
*******

Posts: 1,159
Joined: Aug 2014
Reputation: 8
Post: #2
RE: 802.1 x Mode Problem
Sorry, T32/T38 only support EAP-MD5.
T4x series can support PEAP-MSCHAPv2 mode.

Regards,
James
03-06-2015 09:28 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
nivfreak Offline
Junior Member
**

Posts: 1
Joined: May 2016
Reputation: 0
Post: #3
RE: 802.1 x Mode Problem
Sorry to bump an old thread, but will the T3x series ever support PEAP-MSCHAPv2, or is this series not seeing new firmware?
05-11-2016 06:09 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
Information Yealink Display time problem Premier Tech 2 3,691 06-22-2017 09:25 AM
Last Post: Phonism
  LDAP connectivity problem on firmware 32.70.0.221 T32G taycel 1 4,802 10-23-2015 06:31 AM
Last Post: Yealink_Michael
  T32 - Remote Phonebook Load Problem cooper001 2 4,242 08-29-2014 09:34 PM
Last Post: Yealink Support
Bug T38G "Transfer Mode via DSSkey" cannot be set to anything other than "New Call" Ricopreston 3 6,362 04-02-2014 10:25 PM
Last Post: Yealink Support
  Problem with firmware 38.70.0.115 andrewm 2 6,637 03-06-2013 04:29 AM
Last Post: andrewm

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication