[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
DND Doesn't Silence Calls (T46G)
Author Message
kxjake Offline
Junior Member
**

Posts: 6
Joined: Jan 2015
Reputation: 0
Post: #1
DND Doesn't Silence Calls (T46G)
I have a T46G with the latest firmware (28.73.193.45) and noticed that even when DND is enabled the phone still rings for incoming calls.

Shouldn't it silence itself when DND is enabled? The voip carrier I use does not have any star code which you can dial to enable DND so I need the phone itself to reject calls or silence.

Any advice?

Thanks,
jake
02-06-2015 01:58 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
James_Yealink Offline
Administrator
*******

Posts: 1,159
Joined: Aug 2014
Reputation: 8
Post: #2
RE: DND Doesn't Silence Calls (T46G)
Hi Jake,

Phone won't silence itself when DND is enabled.
When DND is enable phone can still receive a call if it's DND emergency number in case of urgent situation.

Or do you mean that you enable DND and set no emergency number but phone will still receive a call?

Regards,
James
(This post was last modified: 02-06-2015 04:40 PM by James_Yealink.)
02-06-2015 04:39 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
kxjake Offline
Junior Member
**

Posts: 6
Joined: Jan 2015
Reputation: 0
Post: #3
RE: DND Doesn't Silence Calls (T46G)
James,


These are not emergency numbers. They are regular inbound calls from anyone. No special numbers. I enabled DND and it doesn't seem to do anything. Phone still rings for any calls.

Jak
(This post was last modified: 02-06-2015 11:12 PM by kxjake.)
02-06-2015 11:11 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
DFly Offline
Junior Member
**

Posts: 1
Joined: Mar 2013
Reputation: 0
Post: #4
RE: DND Doesn't Silence Calls (T46G)
I have the same problem. Any solutions for this? Now i'm force to use the volume button to silence the device.
02-10-2015 07:00 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
CWR Offline
Moderator
*****

Posts: 716
Joined: May 2013
Reputation: 7
Post: #5
RE: DND Doesn't Silence Calls (T46G)
Who is the provider? Sounds like your voip carrier is your pbx as well.

I have 1 t46 on 28.73.0.45 and this does not happen.

You have the Broadsoft Firmware installed - but I do not think you are using the Broadsoft PBX - correct me if I am wrong. If you are not usingBroadsoft, change to the correct firmware.

Craig Reilly
MCSA, 3cx Advanced Certified
Scottsdale, AZ
(This post was last modified: 02-10-2015 10:55 PM by CWR.)
02-10-2015 09:54 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
stone198 Offline
Junior Member
**

Posts: 4
Joined: Oct 2014
Reputation: 0
Post: #6
RE: DND Doesn't Silence Calls (T46G)
I have the same problem with
Firmware Version 28.80.0.70
Hardware Version 28.2.0.128.0.0.0

I have setup the T46G with
- return Code when DND:480.
- DND Emergency: Disabled
- DND Authorized Numbers: <empty>
- Mode: Phone
- No Action URLs for DND.

But the phone still rings.

Any help is appreciated.
01-18-2016 08:27 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
keffa Offline
Junior Member
**

Posts: 37
Joined: Sep 2015
Reputation: 1
Post: #7
RE: DND Doesn't Silence Calls (T46G)
Can you just confirm that you do not have the code "480" actually entered in the settings anywhere under the FEATURES > FORWARD&DND tab in the web based configuration. Because if you do that's a problem. The "on" and "off" fields should all be blank.
01-19-2016 08:41 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
stone198 Offline
Junior Member
**

Posts: 4
Joined: Oct 2014
Reputation: 0
Post: #8
RE: DND Doesn't Silence Calls (T46G)
Regarding
Quote:"The "on" and "off" fields should all be blank.

I think, you mean "DND on Code" and "DND off code", right? These fields (from V71) are no longer available in V80.
01-19-2016 11:40 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  ghost calls to cid:XXXXX bfcoi974 8 557 06-21-2022 07:37 PM
Last Post: bfcoi974
  T43-U incoming calls do not land on the correct line/button rtfm2022 7 1,540 05-12-2022 05:41 PM
Last Post: rtfm2022
  Feature Request T46G - Return to page 1 imfloridaguy 4 8,436 08-30-2021 12:34 AM
Last Post: eric@hudsonvalleygeek.com
  T46G with EXP40 Sidecars Programming Burl 0 2,012 05-27-2021 11:35 PM
Last Post: Burl
  T46G/T48G no Ringtone because of 183 insted of ringing eurix 2 3,740 04-09-2021 05:16 PM
Last Post: eurix
Heart T46G/T46S - Permission Denied! andy.hughes@intelligencehs.co.uk 1 4,094 03-19-2021 08:59 PM
Last Post: Yisroel_MongoTEL
  yealink t46g Ssl VPN sarajennifer 0 2,276 03-11-2021 02:41 PM
Last Post: sarajennifer
  Call-Info sip header for T46G sidjf3zhdu 9 21,935 02-22-2021 04:06 PM
Last Post: jiansong
  yealink T46g cannot disable lcd screensaver mike702 2 3,857 02-10-2021 04:33 AM
Last Post: jamesbchz
Bug Yealink T46G wont turn on after firmware update mike702 1 3,537 02-02-2021 08:21 PM
Last Post: complex1

Forum Jump:


User(s) browsing this thread:

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication