[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Voicemail "Address Incomplete" but *97 works
Author Message
WoodyTX Offline
Junior Member
**

Posts: 4
Joined: Feb 2015
Reputation: 0
Post: #1
Voicemail "Address Incomplete" but *97 works
I have two SIP-T22 phones using DID service through VoIP.ms. Firmware is 7.72.0.51. This is my first IP telephony experience, but I'm familiar with the concept and have been fairly successful so far. Undecided

The problem is voicemail. I can leave a voicemail on the line, and receive the notification on the phone, but when I hit the 'Message' button to access the voicemail, the phone displays "Address Incomplete" and beeps as if the line is disconnected, then hangs up.

However, dialing *97 works fine for retrieving the voicemail. I can access, play, delete, etc. with no problems.

Thanks for any advice.
02-06-2015 06:31 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
CWR Offline
Moderator
*****

Posts: 717
Joined: May 2013
Reputation: 7
Post: #2
RE: Voicemail "Address Incomplete" but *97 works
Might be a dumb question... but is the message button programmed? WebGui -> Account Page -> Advanced -> Voicemail.
(I don't have a T22 to look at - but that is where it is on the T46. The T38 is on the Basic page of the Account screen.)

Craig Reilly
MCSA, 3cx Advanced Certified
Scottsdale, AZ
(This post was last modified: 02-06-2015 07:40 AM by CWR.)
02-06-2015 07:38 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
WoodyTX Offline
Junior Member
**

Posts: 4
Joined: Feb 2015
Reputation: 0
Post: #3
RE: Voicemail "Address Incomplete" but *97 works
I finally made it back to that client. On that field, the voicemail account number from VOIP.ms is entered.
02-18-2015 04:23 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
WoodyTX Offline
Junior Member
**

Posts: 4
Joined: Feb 2015
Reputation: 0
Post: #4
RE: Voicemail "Address Incomplete" but *97 works
Attached is a screenshot of the voicemail entry.

Again, when I hit the "Message" button, the call fails with the message "Address Incomplete".

Thanks again for any assistance.


Attached File(s) Thumbnail(s)
   
02-21-2015 04:53 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
CWR Offline
Moderator
*****

Posts: 717
Joined: May 2013
Reputation: 7
Post: #5
RE: Voicemail "Address Incomplete" but *97 works
that field does not show *97... it shows 75 and something else.

Craig Reilly
MCSA, 3cx Advanced Certified
Scottsdale, AZ
02-24-2015 04:16 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  T23G Unable to Obtain IP Address xBrito 6 16,503 05-21-2020 01:05 PM
Last Post: jolouis
  T23G Network unavailable obtaining ip address james king 4 19,477 12-04-2019 09:46 AM
Last Post: nn123nn
  openvpn[1205]: RESOLVE: Cannot resolve host address: myfake.dns.net:1194 rafael.catelecom 2 7,857 11-07-2019 02:24 PM
Last Post: rafael.catelecom
  T27P Voicemail greeting problem. damok 2 9,576 04-29-2016 08:11 PM
Last Post: damok
  T28P Phone identifies itself by IP address instead of user and extension mazuno13 5 13,148 03-08-2016 01:24 AM
Last Post: mazuno13
  Can't tell when phone is diverted to voicemail Firewall 1 6,786 09-07-2015 08:09 PM
Last Post: Yealink_Michael
  T22P "RFC 2543 Hold" don't works StefanYohansson 3 15,818 06-19-2015 05:18 AM
Last Post: James_Yealink
  Would it be safe to assign T22P IP address to DMZ? Abigail 4 15,329 04-25-2015 05:29 PM
Last Post: Abigail
  BLF Works but not as expected David Norris 3 10,342 02-12-2014 08:54 PM
Last Post: Yealink Support
  T26P going directly to voicemail moduleit 1 10,151 01-10-2014 03:14 PM
Last Post: Yealink Support

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication