[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Calling a contact in the local directory doesn't work
Author Message
Penny F Offline
Junior Member
**

Posts: 3
Joined: Feb 2015
Reputation: 0
Post: #1
Calling a contact in the local directory doesn't work
I cannot complete a call to a contact in the local directory in my T38 phone. I have tried it as a local number (without an area code) and also with the area code and it just gives me a busy signal and a message that says "Not Found".
Help!
02-05-2015 05:12 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
CWR Offline
Moderator
*****

Posts: 716
Joined: May 2013
Reputation: 7
Post: #2
RE: Calling a contact in the local directory doesn't work
are you using a pbx? local or remote? have you checked the logs on the pbx or run a pcap trace from the phone?
do these calls work if you just dial the number from the directory?

Craig Reilly
MCSA, 3cx Advanced Certified
Scottsdale, AZ
02-05-2015 01:37 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Penny F Offline
Junior Member
**

Posts: 3
Joined: Feb 2015
Reputation: 0
Post: #3
RE: Calling a contact in the local directory doesn't work
Not sure - we use 3cx with the yealink phone and I know our server and gateway is in-house, but I am not the "tech" person - just help with the system software relating to phone settings and am a contact in-house to relate problems, etc. I just was in the yealink software the other day and was testing the contact section. The entry went fine - uploaded photo, but when I call from my phone by accessing the menu then the directory then local contacts, i get a busy signal and a message saying not found. Does this mean the local directory is only for in-house contacts? Not an outside phone number?
02-06-2015 12:19 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
CWR Offline
Moderator
*****

Posts: 716
Joined: May 2013
Reputation: 7
Post: #4
RE: Calling a contact in the local directory doesn't work
Ok - so 3cx... we too use yealink on 3cx and it works on external contacts.
I usually do not add hyphens - but tried and it worked fine.

The best thing would be to look at the 3cx server logs and see the reason for fail.
You say "Gateway" is in house - so I am assuming PSTN/Analog/T1 lines of some sort..

Craig Reilly
MCSA, 3cx Advanced Certified
Scottsdale, AZ
02-06-2015 02:20 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Penny F Offline
Junior Member
**

Posts: 3
Joined: Feb 2015
Reputation: 0
Post: #5
RE: Calling a contact in the local directory doesn't work
I went back in took out the hyphens and it worked!
02-06-2015 05:49 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
Sad Broadsoft Directory & Logs on T38G drewhack 2 9,123 09-03-2014 02:40 PM
Last Post: Lucas1
  T38G call back not work tlc 1 8,178 09-01-2014 08:40 PM
Last Post: Wilson_Yealink
  Speed dial from contact list Vicious 5 12,535 04-30-2014 07:03 AM
Last Post: CWR
  LDAP Directory jeandrews 4 13,984 09-24-2013 01:17 AM
Last Post: phoneguy797
  Contact list in non-alphabetical order Vicious 1 7,847 04-19-2013 04:37 PM
Last Post: Yealink Support

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication