[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
How to enable "second" dialtone on T42, T46G?
Author Message
cadillackid Offline
Junior Member
**

Posts: 26
Joined: Jan 2015
Reputation: 0
Post: #1
How to enable "second" dialtone on T42, T46G?
we have been a huge user of Aastra / polycom phones in the past, however we are beginning to test Yealink T4x phones in the field with the intentions of switching to them. so far our results are very positive, except the biggest complaint we get is when they dial '8' or '9' for an outside line, they get silence and not the familiar second dialtone. we replace a LOT of legacy PBX's where this feature exists.. but I cannot figure out how to enable it on the Yealink phones. I have tried various combinations in my dialnow rules but unable to get any result.

on polycom, you would make a dialplan rule say:
9,18005551212 and after the user dialed a 9, they hear dialtone again until they dial the next digit (1 in this case).
all of the digits 918005551212 are sent to the SIP server.

on Aastra it is 9;18005551212 again dialtone is played after the '9'.

how can I accomplish on the yealink T4x and T2x phones?
-Christopher
01-31-2015 10:33 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
James_Yealink Offline
Administrator
*******

Posts: 1,159
Joined: Aug 2014
Reputation: 8
Post: #2
RE: How to enable "second" dialtone on T42, T46G?
Hi Christopher,

Go to Feature-> Audio, fill 9 into Redial Tone filed. Then when you click 9 you will hear a second dial tone.
You can fill a single digit or multiple.

Regards,
James
01-31-2015 10:51 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
cadillackid Offline
Junior Member
**

Posts: 26
Joined: Jan 2015
Reputation: 0
Post: #3
RE: How to enable "second" dialtone on T42, T46G?
thanks for the Quick reply! this works perfectly, except how i can put multiple numbers in?

we use these in the admin (and guestroom) positions of Hotels.. where it is common for a user to dial '8' for Long distance and '9' for Local calls..

of course we put the '8' and / or '9' in our dialnow rules so the calls complete, but the redial tone, only way to inout 8 or 9 but not 8 and 9 without requiring the user dial '89'.

is there a field i nthe provision file which we can have 2 redial tone digits?
-Christopher
01-31-2015 11:07 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
James_Yealink Offline
Administrator
*******

Posts: 1,159
Joined: Aug 2014
Reputation: 8
Post: #4
RE: How to enable "second" dialtone on T42, T46G?
Currenlty it's not supported, only one redial tone rule can be configured. I will send the request to our product dept and they may consider it in future firmware.

If you request the feature urgently please send it to your distributor.

Regards,
James
02-02-2015 09:48 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
cadillackid Offline
Junior Member
**

Posts: 26
Joined: Jan 2015
Reputation: 0
Post: #5
RE: How to enable "second" dialtone on T42, T46G?
(02-02-2015 09:48 AM)Yealink_James Wrote:  Currenlty it's not supported, only one redial tone rule can be configured. I will send the request to our product dept and they may consider it in future firmware.

If you request the feature urgently please send it to your distributor.

Regards,
James

that would be great to request it.. we are a reseller and looking to replace our current aastra admin phones with the Yealink product.
-Christopher
02-02-2015 10:59 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Need bin and rfs files SIP-T46G RobbyK 1 729 01-11-2024 11:26 PM
Last Post: complex1
  SIP-T46G Need firmware update instructions RobbyK 2 966 01-11-2024 10:52 PM
Last Post: RobbyK
  T46G recovery files evoip 1 1,366 10-10-2023 12:46 AM
Last Post: Yisroel_MongoTEL
  No dialtone - T46S, EHS36, Sennheiser headset Huleboer 0 1,911 09-28-2023 05:49 PM
Last Post: Huleboer
  Model T42s and T42g, the speakerphone is enable on incoming calls Lissvazquez 6 2,720 07-28-2023 10:27 PM
Last Post: complex1
  Send different codes on keystroke (enable and disable) Marsl84 0 944 04-21-2023 08:15 PM
Last Post: Marsl84
  T46G Multiple EXT Port amandah 2 1,974 04-04-2023 01:06 AM
Last Post: Yisroel_MongoTEL
Photo T46G LED blinks when screen is off W 4 8,130 03-29-2023 05:36 AM
Last Post: matthewchubb
  T46G/S Multicast on PC Port Issue MiKeDaDoC 5 11,552 01-02-2023 01:30 AM
Last Post: kw160008
  T46G call completed elsewhere zimbocz 3 10,008 10-28-2022 03:28 AM
Last Post: tredd1982

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication