[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
T28P and the auth-user-pass mistery
Author Message
spectrum Offline
Junior Member
**

Posts: 7
Joined: Jan 2015
Reputation: 0
Post: #1
T28P and the auth-user-pass mistery
Dear all,

i would like to connect to a vpn server that asks user-password authetication.

Some voices in the net says this optoin is not supported, but:

1) this thread says that T2X model should support the "auth-user-pass" option:

http://forum.yealink.com/forum/showthread.php?tid=332

2) the famous pdf
http://www.yealink.com/Upload/T2X/201311...Phones.pdf
says:
Quote:OpenVPN operates as a client-server application. After enabling the Open VPN feature on IP phones, the IP phones act as VPN clients and use pre-shared secret keys, certificates, or user name/password to authenticate the Open VPN server

So, i am still not able to connect. Is someone here been able to connect with auth-user-pass in T28P phones ? I upgraded now to last firmware 2.73.0.40, nothing changes.

Every help is really appreciated.
Thanks
(This post was last modified: 01-31-2015 09:17 AM by spectrum.)
01-31-2015 09:14 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
spectrum Offline
Junior Member
**

Posts: 7
Joined: Jan 2015
Reputation: 0
Post: #2
RE: T28P and the auth-user-pass mistery
is it possible in a yealink forum, no one knows if openvpn "auth-user-pass" is supported ?
At least a "no" would be appreciated.
(This post was last modified: 03-27-2015 04:18 AM by spectrum.)
03-27-2015 04:17 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
James_Yealink Offline
Administrator
*******

Posts: 1,159
Joined: Aug 2014
Reputation: 8
Post: #3
RE: T28P and the auth-user-pass mistery
Hi,

Sorry for not reply before.
The parameter "auth-user-pass" is supported in T2x series. Can you send us your .tar file for a check? You can mask private message before sending it.

Regards,
James
(This post was last modified: 03-27-2015 05:19 AM by James_Yealink.)
03-27-2015 05:19 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
spectrum Offline
Junior Member
**

Posts: 7
Joined: Jan 2015
Reputation: 0
Post: #4
RE: T28P and the auth-user-pass mistery
Hello,

here is the log, seems currently the issue is "Mar 27 01:13:50 openvpn[397]: read UDPv4 [EHOSTUNREACH]: No route to host (code=148)"


Dec 26 00:00:02 syslogd started: BusyBox v1.10.3
Dec 26 00:00:02 netS[251]: ANY <0+emerg > netServer log :sys=1,cons=1,time=0,E=3,W=4,N=5,I=6,D=7
Dec 26 00:00:02 netS[251]: ANY <0+emerg > ANY =3
Dec 26 00:00:02 netS[251]: ANY <0+emerg > Version :5.1.0.9 for release
Dec 26 00:00:02 netS[251]: ANY <0+emerg > Built-at :Sep 19 2014,17:39:30
Mar 27 00:00:00 netS[262]: SRV <3+error > dhcp options file no found
Mar 27 00:00:00 netS[262]: SRV <3+error > dhcp options file no found
Mar 27 00:00:02 Log [242]: ANY <0+emerg > Log log :sys=1,cons=0,time=0,E=3,W=4,N=5,I=6,D=7
Mar 27 00:00:02 Log [242]: ANY <0+emerg > ANY =3
Mar 27 00:00:03 Log [242]: CSRV<3+error > User Config Path = 001565766f71-local.cfg
Mar 27 00:00:08 IPP[313]: ANY <0+emerg >408.003.388:IPP log :sys=1,cons=0,time=1,sock=0,E=3,W=4,N=5,I=6,D=7
Mar 27 00:00:08 IPP[313]: ANY <0+emerg >408.007.642:Version :12.1.97.0 for release (libsrtp)
Mar 27 00:00:08 IPP[313]: ANY <0+emerg >408.008.956:Built-at:Dec 9 2014,18:40:04. Using svn id NULL
Mar 27 00:00:08 IPP[313]: ANY <0+emerg >408.010.228:Logmode :0x00000005
Mar 27 00:00:08 IPP[313]: ANY <0+emerg >408.011.446:setting :memcheck=0,assert=0
Mar 27 00:00:08 IPP[313]: ANY <0+emerg >408.012.676:ANY =4
Mar 27 00:00:08 IPP[313]: ANY <0+emerg >408.015.027:ANY =5
Mar 27 00:00:08 IPP[313]: ANY <0+emerg >408.016.818:HW Ver :1.0.0.53
Mar 27 00:00:08 IPP[313]: IPP <5+notice>408.382.245:PROF t28 v2
Mar 27 00:00:09 IPP[313]: IPP <4+warnin>409.377.637:unkown msg,00008001,00000000,00000000
Mar 27 00:00:09 LIBD[251]: DANY<0+emerg > LIBD log :sys=1,cons=0,time=0,E=3,W=4,N=5,I=6,D=7
Mar 27 00:00:10 LIBD[251]: DANY<0+emerg > LIBD log :sys=1,cons=1,time=0,E=3,W=4,N=5,I=6,D=7
Mar 27 00:00:10 LIBD[251]: DANY<0+emerg > DANY=3
Mar 27 00:00:11 auto[349]: ANY <0+emerg > autoServer log :sys=1,cons=1,time=0,E=3,W=4,N=5,I=6,D=7
Mar 27 00:00:11 auto[349]: ANY <0+emerg > ANY =3
Mar 27 00:00:11 auto[349]: ANY <0+emerg > Version :5.0.0.37 for release
Mar 27 00:00:11 auto[349]: ANY <0+emerg > Built-at :Dec 22 2014,19:35:18
Mar 27 00:00:12 auto[349]: ATP <3+error > network isn't complete!
Mar 27 00:00:13 IPP[313]: IPP <4+warnin>413.058.405:unkown msg,00002002,00000000,00000000
Mar 27 00:00:13 IPP[313]: IPP <4+warnin>413.063.389:unkown msg,00010010,00000000,00000000
Mar 27 00:00:13 IPP[313]: IPP <4+warnin>413.064.843:unkown msg,00002005,00000000,00000000
Mar 27 00:00:13 SIP [368]: ANY <0+emerg > SIP log :sys=1,cons=0,time=0,E=3,W=4,N=5,I=6,D=7
Mar 27 00:00:13 SIP [368]: ANY <0+emerg > ANY =5
Mar 27 00:00:13 SIP [368]: ANY <0+emerg > [SIP] UA Build:[ (Dec 26 2014,14:11:29)-Release] Version:[ 7.3.0.60 ]
Mar 27 00:00:13 SIP [368]: SIP <5+notice> [SIP] sip phone type is:0
Mar 27 00:00:14 auto[349]: ATP <3+error > network isn't complete!
Mar 27 00:00:14 SIP [368]: SIP <5+notice> [SIP] wait for ui thread sync, max wait for 59 s....
Mar 27 00:00:15 openvpn[386]: OpenVPN 2.1.3 mipsel-unknown-linux-uclibc [SSL] [LZO2] [EPOLL] built on Sep 30 2013
Mar 27 00:00:15 openvpn[386]: WARNING: file '/yealink/config/openvpn/keys/auth-data' is group or others accessible
Mar 27 00:00:15 openvpn[386]: WARNING: No server certificate verification method has been enabled. See http://openvpn.net/howto.html#mitm for more info.
Mar 27 00:00:15 openvpn[386]: NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
Mar 27 00:00:15 openvpn[386]: LZO compression initialized
Mar 27 00:00:15 openvpn[386]: Control Channel MTU parms [ L:1574 D:138 EF:38 EB:0 ET:0 EL:0 ]
Mar 27 00:00:15 openvpn[386]: Socket Buffers: R=[114688->131072] S=[114688->131072]
Mar 27 00:00:15 openvpn[386]: Data Channel MTU parms [ L:1574 D:1450 EF:42 EB:135 ET:32 EL:0 AF:3/1 ]
Mar 27 00:00:15 openvpn[386]: Local Options hash (VER=V4): 'd79ca330'
Mar 27 00:00:15 openvpn[386]: Expected Remote Options hash (VER=V4): 'f7df56b8'
Mar 27 00:00:15 SIP [368]: SIP <5+notice> [SIP] wait for ui thread sync, max wait for 58 s....
Mar 27 01:13:49 IPP[313]: IPP <4+warnin>829.963.044:unkown msg,00002007,00007080,00000000
Mar 27 01:13:49 auto[349]: ATP <3+error > network isn't complete!
Mar 27 01:13:50 openvpn[397]: UDPv4 link local (bound): [undef]:1194
Mar 27 01:13:50 openvpn[397]: UDPv4 link remote: 83.150.122.201:1194
Mar 27 01:13:50 openvpn[397]: read UDPv4 [EHOSTUNREACH]: No route to host (code=148)
Mar 27 01:13:50 SIP [368]: SIP <5+notice> [SIP] wait for ui thread sync, max wait for 57 s....
Mar 27 01:13:51 auto[349]: ATP <3+error > network isn't complete!
Mar 27 01:13:51 Log [288]: ANY <0+emerg > Log log :sys=1,cons=0,time=0,E=3,W=4,N=5,I=6,D=7
Mar 27 01:13:51 Log [288]: ANY <0+emerg > ANY =5
Mar 27 01:13:51 Log [288]: ANY <0+emerg > 831.894.081:Log log :sys=1,cons=0,time=1,E=3,W=4,N=5,I=6,D=7
Mar 27 01:13:51 Log [288]: ANY <0+emerg > 831.895.969:ANY =3
Mar 27 01:13:51 SIP [368]: SIP <5+notice> [SIP] wait for ui thread sync, max wait for 56 s....
Mar 27 01:13:52 inetd[417]: /etc/inetd.conf: No such file or directory
Mar 27 01:13:52 SIP [368]: SIP <5+notice> [SIP] wait for ui thread sync, max wait for 55 s....
Mar 27 01:13:53 auto[349]: ATP <3+error > network isn't complete!
Mar 27 01:13:53 SIP [368]: SIP <5+notice> [SIP] wait for ui thread sync, max wait for 54 s....
Mar 27 01:13:54 auto[349]: ATP <3+error > network isn't complete!
Mar 27 01:13:54 SIP [368]: SIP <5+notice> [SIP] wait for ui thread sync, max wait for 53 s....
Mar 27 01:13:55 SIP [368]: SIP <5+notice> [SIP] wait for ui thread sync, max wait for 52 s....
Mar 27 01:13:55 openvpn[397]: read UDPv4 [EHOSTUNREACH]: No route to host (code=148)
Mar 27 01:13:56 auto[349]: ATP <3+error > network isn't complete!
Mar 27 01:13:56 TR9 [448]: ANY <0+emerg > TR9 log :sys=1,cons=0,time=0,E=3,W=4,N=5,I=6,D=7
Mar 27 01:13:56 TR9 [448]: ANY <0+emerg > ANY =5
Mar 27 01:13:56 TR9 [448]: ANY <0+emerg > ANY =3
Mar 27 01:13:56 SIP [368]: SIP <5+notice> [SIP] wait for ui thread sync, max wait for 51 s....
Mar 27 01:13:57 ATP [349]: ANY <0+emerg > ATP log :sys=1,cons=1,time=0,E=3,W=4,N=5,I=6,D=7
Mar 27 01:13:57 ATP [349]: ANY <0+emerg > ANY =3
Mar 27 01:13:57 LIBD[349]: DANY<0+emerg > LIBD log :sys=1,cons=0,time=0,E=3,W=4,N=5,I=6,D=7
Mar 27 01:13:57 LIBD[349]: DANY<0+emerg > LIBD log :sys=1,cons=1,time=0,E=3,W=4,N=5,I=6,D=7
Mar 27 01:13:57 LIBD[349]: DANY<0+emerg > DANY=3
Mar 27 01:13:57 SIP [368]: SIP <5+notice> [SIP] wait for ui thread sync, max wait for 50 s....
Mar 27 01:13:58 SIP [368]: SIP <5+notice> [SIP] wait for ui thread sync, max wait for 49 s....
Mar 27 01:13:59 SIP [368]: SIP <5+notice> [SIP] wait for ui thread sync, max wait for 48 s....
Mar 27 01:14:00 SIP [368]: SIP <5+notice> [SIP] wait for ui thread sync, max wait for 47 s....
Mar 27 01:14:02 SIP [368]: SIP <5+notice> [SIP] wait for ui thread sync, max wait for 46 s....
Mar 27 01:14:03 SIP [368]: SIP <5+notice> [SIP] wait for ui thread sync, max wait for 45 s....
Mar 27 01:14:04 SIP [368]: SIP <5+notice> [SIP] wait for ui thread sync, max wait for 44 s....
Mar 27 01:14:04 LIBD[453]: DANY<0+emerg > LIBD log :sys=1,cons=0,time=0,E=3,W=4,N=5,I=6,D=7
Mar 27 01:14:04 LIBD[453]: DANY<0+emerg > LIBD log :sys=1,cons=1,time=0,E=3,W=4,N=5,I=6,D=7
Mar 27 01:14:04 LIBD[453]: DANY<0+emerg > DANY=3
Mar 27 01:14:05 SIP [368]: SIP <5+notice> [SIP] wait for ui thread sync, max wait for 43 s....
Mar 27 01:14:05 Log [392]: ANY <0+emerg > Log log :sys=1,cons=0,time=0,E=3,W=4,N=5,I=6,D=7
Mar 27 01:14:05 Log [392]: ANY <0+emerg > ANY =3
Mar 27 01:14:06 SIP [368]: SIP <5+notice> [SIP] wait for ui thread sync, max wait for 42 s....
Mar 27 01:14:06 openvpn[397]: read UDPv4 [EHOSTUNREACH]: No route to host (code=148)
Mar 27 01:14:07 SIP [368]: SIP <5+notice> [SIP] wait for ui thread sync, max wait for 41 s....
Mar 27 01:14:07 IPP[313]: IPP <5+notice>847.331.467:OPEN_HEADSET_MODE:00000001 00000000
Mar 27 01:14:07 IPP[313]: IPP <5+notice>847.336.417:SET_VOLUNE:00000001 00000000
Mar 27 01:14:07 IPP[313]: IPP <5+notice>847.338.612:PLAY_LOCAL_DTMF:00000000 00000001
Mar 27 01:14:07 IPP[313]: IPP <5+notice>847.458.847:OPEN_HANDSET_MODE:00000001 00000000
Mar 27 01:14:07 IPP[313]: IPP <5+notice>847.461.568:OPEN_HANDFREE_MODE:00000001 00000000
Mar 27 01:14:07 IPP[313]: IPP <5+notice>847.559.910:SET_VOLUNE:00000001 00000014
Mar 27 01:14:07 IPP[313]: IPP <5+notice>847.561.469:TALK_START:fffffffe 00070000
Mar 27 01:14:07 IPP[313]: IPP <5+notice>847.563.908:OPEN_HANDSET_MODE:00000001 00000000
Mar 27 01:14:07 IPP[313]: IPP <5+notice>847.566.035:SET_VOLUNE:00000001 00000012
Mar 27 01:14:08 SIP [368]: SIP <5+notice> [SIP] wait for ui thread sync, max wait for 40 s....
Mar 27 01:14:09 SIP [368]: SIP <5+notice> [SIP] wait for ui thread sync, max wait for 39 s....
Mar 27 01:14:10 SIP [368]: SIP <5+notice> [SIP] wait for ui thread sync, max wait for 38 s....
Mar 27 01:14:11 SIP [368]: SIP <5+notice> [SIP] wait for ui thread sync, max wait for 37 s....
Mar 27 01:14:12 SIP [368]: SIP <5+notice> [SIP] wait for ui thread sync, max wait for 36 s....
Mar 27 01:14:13 SIP [368]: SIP <5+notice> [SIP] wait for ui thread sync, max wait for 35 s....
Mar 27 01:14:14 SIP [368]: SIP <5+notice> [SIP] wait for ui thread sync, max wait for 34 s....
Mar 27 01:14:15 SIP [368]: SIP <5+notice> [SIP] wait for ui thread sync, max wait for 33 s....
Mar 27 01:14:16 SIP [368]: SIP <5+notice> [SIP] wait for ui thread sync, max wait for 32 s....
Mar 27 01:14:17 SIP [368]: SIP <5+notice> [SIP] wait for ui thread sync, max wait for 31 s....
Mar 27 01:14:18 SIP [368]: SIP <5+notice> [SIP] wait for ui thread sync, max wait for 30 s....
Mar 27 01:14:18 LDAP[453]: ANY <0+emerg > LDAP log :sys=1,cons=0,time=0,E=3,W=4,N=5,I=6,D=7
Mar 27 01:14:18 LDAP[453]: ANY <0+emerg > ANY =3
Mar 27 01:14:18 LDAP[453]: ANY <0+emerg > MEM =3
Mar 27 01:14:18 LDAP[453]: ANY <0+emerg > LDAP =3
Mar 27 01:14:18 LDAP[453]: LDAP<3+error > Init config! libldap Ver:3.2.0.3
Mar 27 01:14:19 SIP [368]: SIP <5+notice> [SIP] wait for ui thread sync, max wait for 29 s....
Mar 27 01:14:20 SIP [368]: SIP <5+notice> [SIP] wait for ui thread sync, max wait for 28 s....
Mar 27 01:14:20 IPP[313]: IPP <4+warnin>860.777.104:unkown msg,00010005,00000000,00000000
Mar 27 01:14:21 SIP [368]: SIP <5+notice> [SIP] wait for ui thread sync, max wait for 27 s....
Mar 27 01:14:21 SIP [368]: SIP <5+notice> [SIP] ui thread is up and can handle message, sip begin to run....
Mar 27 01:14:22 SIP [368]: SIP <5+notice> [SIP] ** Load phone context **
Mar 27 01:14:23 SIP [368]: SIP <5+notice> [SIP] ** Load OK **
Mar 27 01:14:23 SIP [368]: ANY <0+emerg > ANY =3
Mar 27 01:14:24 LIBD[462]: HTTP<3+error > Client error
Mar 27 01:14:24 IPP[313]: IPP <4+warnin>864.543.707:unkown msg,00010006,00000002,00000001
Mar 27 01:14:29 LIBD[463]: HTTP<3+error > Client error
Mar 27 01:14:34 LIBD[462]: HTTP<3+error > Client error
Mar 27 01:14:50 openvpn[397]: [UNDEF] Inactivity timeout (--ping-restart), restarting
Mar 27 01:14:50 IPP[313]: IPP <4+warnin>890.025.287:unkown msg,00010102,00000000,00000000
Mar 27 01:14:50 openvpn[397]: TCP/UDP: Closing socket
Mar 27 01:14:50 openvpn[397]: SIGUSR1[soft,ping-restart] received, process restarting
Mar 27 01:14:50 openvpn[397]: Restart pause, 2 second(s)
Mar 27 01:14:52 openvpn[397]: WARNING: No server certificate verification method has been enabled. See http://openvpn.net/howto.html#mitm for more info.
Mar 27 01:14:52 openvpn[397]: NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
Mar 27 01:14:52 openvpn[397]: Re-using SSL/TLS context
Mar 27 01:14:52 openvpn[397]: LZO compression initialized
Mar 27 01:14:52 openvpn[397]: Control Channel MTU parms [ L:1574 D:138 EF:38 EB:0 ET:0 EL:0 ]
Mar 27 01:14:52 openvpn[397]: Socket Buffers: R=[114688->131072] S=[114688->131072]
Mar 27 01:14:52 openvpn[397]: Data Channel MTU parms [ L:1574 D:1450 EF:42 EB:135 ET:32 EL:0 AF:3/1 ]
Mar 27 01:14:52 openvpn[397]: Local Options hash (VER=V4): 'd79ca330'
Mar 27 01:14:52 openvpn[397]: Expected Remote Options hash (VER=V4): 'f7df56b8'
Mar 27 01:14:52 openvpn[397]: UDPv4 link local (bound): [undef]:1194
Mar 27 01:14:52 openvpn[397]: UDPv4 link remote: 83.150.122.201:1194
Mar 27 01:14:55 IPP[313]: IPP <5+notice>895.976.266:PLAY_LOCAL_DTMF:00000000 0000000a
Mar 27 01:14:56 IPP[313]: IPP <4+warnin>896.797.493:unkown msg,00010006,00000002,00000003
Mar 27 01:14:56 SIP [475]: SUA <3+error > [002] [Server0]: try reg again after (30) s
Mar 27 01:15:01 openvpn[397]: read UDPv4 [EHOSTUNREACH]: No route to host (code=148)
Mar 27 01:15:07 openvpn[397]: read UDPv4 [EHOSTUNREACH]: No route to host (code=148)
esw0 Link encap:Ethernet HWaddr 00:15:65:76:6F:71
inet addr:192.168.0.18 Bcast:192.168.0.255 Mask:255.255.255.0
inet6 addr: fe80::215:65ff:fe76:6f71/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:324 errors:0 dropped:0 overruns:0 frame:0
TX packets:357 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:83527 (81.5 KiB) TX bytes:186022 (181.6 KiB)

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)

PID USER VSZ STAT COMMAND
1 root 2808 S init
2 root 0 SW [ksoftirqd/0]
3 root 0 SW< [desched/0]
4 root 0 SW< [events/0]
5 root 0 SW< [khelper]
10 root 0 SW< [kthread]
13 root 0 SW< [kblockd/0]
39 root 0 SW [pdflush]
40 root 0 SW [pdflush]
42 root 0 SW< [aio/0]
41 root 0 SW [kswapd0]
60 root 0 SW [mtdblockd]
48 root 0 SW [kseriod]
88 root 0 SW< [IRQ 8]
91 root 0 SW< [IRQ 15]
120 root 0 SW< [kmktimer]
141 root 0 SWN [jffs2_gcd_mtd4]
212 root 2808 S init
239 root 0 SW< [IRQ 35]
241 root 2808 S /bin/sh /yealink/scripts/Net.sh
242 root 10460 S /yealink/bin/configServer.exx
251 root 9152 S /yealink/bin/rtServer.exx
258 root 2268 S /sbin/syslogd -S -O /tmp/Messages -s 200 -b1
261 root 9152 S /yealink/bin/rtServer.exx
262 root 9152 S /yealink/bin/rtServer.exx
263 root 9152 S /yealink/bin/rtServer.exx
267 root 2808 S /bin/sh /yealink/scripts/VpmApp.sh
269 root 2808 S /bin/sh /yealink/scripts/ScreenApp.sh
288 root 17640 S /yealink/bin/Screen.exe
292 root 0 SW< [IRQ 29]
313 root 10896 S /yealink/bin/ggsvca_ipp -q -w -m ANY=5
318 root 10896 S /yealink/bin/ggsvca_ipp -q -w -m ANY=5
320 root 10896 S /yealink/bin/ggsvca_ipp -q -w -m ANY=5
321 root 10896 S /yealink/bin/ggsvca_ipp -q -w -m ANY=5
322 root 10896 S /yealink/bin/ggsvca_ipp -q -w -m ANY=5
323 root 10896 S /yealink/bin/ggsvca_ipp -q -w -m ANY=5
324 root 10896 S /yealink/bin/ggsvca_ipp -q -w -m ANY=5
325 root 10896 S /yealink/bin/ggsvca_ipp -q -w -m ANY=5
326 root 10896 S /yealink/bin/ggsvca_ipp -q -w -m ANY=5
327 root 10896 S /yealink/bin/ggsvca_ipp -q -w -m ANY=5
347 root 2808 S /bin/sh /yealink/scripts/SipApp.sh
349 root 10032 S /yealink/bin/autoServer.exx
364 root 10032 S /yealink/bin/autoServer.exx
368 root 10712 S /yealink/bin/sipServer.exx
365 root 10032 S /yealink/bin/autoServer.exx
374 root 10032 S /yealink/bin/autoServer.exx
389 root 6048 S ./sbin/lighttpd -f /yealink/bin/lighttpd/config/light
392 root 11532 S /yealink/html/WEB-INFO/bin/fcgiServer.exx
397 root 8704 S /yealink/bin/openvpn --daemon --config /yealink/confi
417 root 2808 S /usr/sbin/inetd
418 root 2808 S /bin/sh /yealink/scripts/TR069.sh
448 root 10212 S /yealink/bin/tr069_client
449 root 10212 S /yealink/bin/tr069_client
450 root 10212 S /yealink/bin/tr069_client
451 root 10212 S /yealink/bin/tr069_client
452 root 17640 S /yealink/bin/Screen.exe
453 root 17640 S /yealink/bin/Screen.exe
454 root 17640 S /yealink/bin/Screen.exe
455 root 17640 S /yealink/bin/Screen.exe
456 root 17640 S /yealink/bin/Screen.exe
457 root 17640 S /yealink/bin/Screen.exe
458 root 17640 S /yealink/bin/Screen.exe
459 root 0 SW< [IRQ 45]
460 root 17640 S /yealink/bin/Screen.exe
461 root 17640 S /yealink/bin/Screen.exe
462 root 17640 S /yealink/bin/Screen.exe
463 root 17640 S /yealink/bin/Screen.exe
464 root 17640 S /yealink/bin/Screen.exe
465 root 17640 S /yealink/bin/Screen.exe
466 root 17640 S /yealink/bin/Screen.exe
467 root 17640 S /yealink/bin/Screen.exe
470 root 11532 S /yealink/html/WEB-INFO/bin/fcgiServer.exx
471 root 11532 S /yealink/html/WEB-INFO/bin/fcgiServer.exx
472 root 17640 S /yealink/bin/Screen.exe
473 root 10712 S /yealink/bin/sipServer.exx
474 root 10712 S /yealink/bin/sipServer.exx
475 root 10712 S /yealink/bin/sipServer.exx
476 root 10712 S /yealink/bin/sipServer.exx
477 root 10712 S /yealink/bin/sipServer.exx
478 root 2808 S sh -c cd /tmp;ifconfig >> Messages;ps >> Messages;tar
480 root 2808 R ps

Regards
03-27-2015 08:58 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
James_Yealink Offline
Administrator
*******

Posts: 1,159
Joined: Aug 2014
Reputation: 8
Post: #5
RE: T28P and the auth-user-pass mistery
Hi, Can you send the openvpn.tar file to James@yealink.com. Will check it firstly. You can mask private information there.

Regards,
James
03-27-2015 09:46 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
spectrum Offline
Junior Member
**

Posts: 7
Joined: Jan 2015
Reputation: 0
Post: #6
RE: T28P and the auth-user-pass mistery
Hi, all solved.

a good rule for a good world is to give help, not only get and use it.
So i leave details about how i solved.

I found an error in the login user / pass data. After a reboot, device is connected to VPN.
For who need help on similar issue, mainly, try this
1 - set up the vpn i.e. on linux pc, to se it works
2 - set up vpn.cnf as from the PC working one, mine is:

dev tap
remote xxxx.xxxxxx.com
dh /config/openvpn/keys/dh1024.pem
ca /config/openvpn/keys/ca.crt
port 1194
mode p2p
tls-client
route xx.xx.xx.0 255.255.255.0 192.168.0.1
pull
proto udp
comp-lzo
keepalive 10 60
persist-tun
persist-key
verb 3

script-security 2 execve
auth-user-pass /config/openvpn/keys/auth-data

(note, x are for data i cannot share).

and respect the file structure shown from yealink docs. For auth user/pass
additional auth-data file must be stored in keys

3 - create the openvpn.tar, and enjoy.

NOTE: if vpn is not connected, check log files in web ui, you will find
important openvpn logs there (see SETTINGS -> CONFIGURATION and EXPORT logs).

NOTE: each time you update openvpn.tar from the web ui, do:
1 - disable vpn, apply (reboot)
2 - upload new openvpn.tar, enable, apply (reboot)

Thanks for the support.

Reagrds,
Angelo
(This post was last modified: 03-28-2015 05:29 AM by spectrum.)
03-28-2015 05:25 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
James_Yealink Offline
Administrator
*******

Posts: 1,159
Joined: Aug 2014
Reputation: 8
Post: #7
RE: T28P and the auth-user-pass mistery
Thanks for your sharing.

Regards,
James
03-28-2015 05:32 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  making a BLF type key to watch MWI for another user brandywine 6 11,901 01-17-2017 10:47 PM
Last Post: Michael_Yealink
  Lock DSSKEY on phone t28p rafaelnetto 1 6,539 11-14-2016 06:30 AM
Last Post: Leah_Yealink
  T26P/T28p BLF light not working after firmware upgrade futures 2 13,239 01-27-2016 11:29 PM
Last Post: janduy.manzanos@gmail.com
  T28P DSS Keys cmassoc 2 7,520 08-13-2015 10:00 PM
Last Post: cmassoc
  v2.72.0.30 and T28P BLF lights arainc 8 18,036 11-13-2014 04:52 AM
Last Post: arainc
  T28P calls go to speaker Santi 3 9,084 11-10-2014 10:51 AM
Last Post: Lucas1
  YEalink T28p v 2.72.0.30 fabster 7 16,147 10-28-2014 09:42 AM
Last Post: Yealink_Jim
  T28P and multiple EXT39 modules crash/lag the phone hunters 2 8,545 07-19-2014 11:51 AM
Last Post: Yealink Support
  SIP-T28P UCM1608 dante5do 3 10,529 05-14-2014 04:11 PM
Last Post: Yealink Support

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication