[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
T3x phones and transfers first call instead of current call
Author Message
jasit Offline
Member
***

Posts: 85
Joined: Mar 2013
Reputation: 0
Post: #1
T3x phones and transfers first call instead of current call
I am not sure if this has been answered before, but I remember the issue has come up and I searched for the answer.

We have T32 and T38's and it fails on boths phones. The firmware I have on the T38 is 38.70.1.26 because I am running 3cx v11 and I need multicast support.


If we have a phone setup to anwer multiple calls and they are currently on a call, the 2 call will blink and give them the option to answer.

When they answer the 2nd call it puts the first call on hold, and everything is fine, they can swap back and forth between the calls.

if they want to transfer the 2nd call to another desk. it transfers the first call instead.

my transfer settings are as follows
Blind ToH Enabled
Semi-Attend Disabled
Attened Toh Enabled
Transfer on Conf Disabled
Transfer Mode via DSSkey Blind Transfer
01-30-2015 04:45 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
James_Yealink Offline
Administrator
*******

Posts: 1,159
Joined: Aug 2014
Reputation: 8
Post: #2
RE: T3x phones and transfers first call instead of current call
Hi Jasit,

Please try this autoprovision parameter:

transfer.multi_call_trans_enable = 1

0: Phone will direcltry associate current two calls.
1: There is a popup, you can choose new call or associate current two calls.

Regards,
James
01-30-2015 09:11 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
jasit Offline
Member
***

Posts: 85
Joined: Mar 2013
Reputation: 0
Post: #3
RE: T3x phones and transfers first call instead of current call
Hi James
thanks for the quick reply, I just finished trying that out and it works about 50% of the time.


If the person is on a call and a second call comes in they hit the answer tab, it puts the first call on hold and they can talk to the 2nd caller.

if they press the transfer button while on the second call a menu screen comes up and they can select either New Call, or the caller id of the first call. If they select the new call and press transfer and type in the number, the 2nd call transfers.

if they press the transfer button while on the second call a menu screen comes up and they can select either New Call, or the caller id of the first call. If they select the new call and press a dss button with a blf associcated to it, the 1st call transfers even though they selected the 2nd number


Jasit


If

(01-30-2015 09:11 AM)Yealink_James Wrote:  Hi Jasit,

Please try this autoprovision parameter:

transfer.multi_call_trans_enable = 1

0: Phone will direcltry associate current two calls.
1: There is a popup, you can choose new call or associate current two calls.

Regards,
James
01-30-2015 10:45 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  T58A SCA Shared Call Appearance with Call Manager cm_y 1 2,225 11-15-2019 09:42 AM
Last Post: Jacky_Yealink
  T29G can't hang up call unless end call is pressed Bizfon 1 2,176 11-14-2019 07:51 AM
Last Post: Paz_Yealink
  BLF and Call Park on T29G pureit 0 1,614 04-02-2019 01:36 AM
Last Post: pureit
  W56H- Remove Missed call list plainlanddental 5 6,573 01-02-2019 12:47 PM
Last Post: complex1
  T29G Remote Phonebook no lookup for incoming call Chris708 1 3,586 07-16-2018 03:15 PM
Last Post: Chris708
  T46G Call Fwd DSS Key enables / disables ALL fwd types MintTelecom 4 7,035 02-06-2018 05:28 AM
Last Post: Aishion_Yealink
  Duplicate Missed Call Enties on T38G koolkenh 2 5,709 11-03-2017 09:02 PM
Last Post: Ret
  T52S on call DSS key display too short tima 3 4,907 08-22-2017 01:13 AM
Last Post: Aishion_Yealink
  T38G Continues to ring after outbound call connects srcurtis 6 8,314 06-14-2017 09:51 AM
Last Post: Kevin_Yealink
  2 T46G Phones; Different BLF behavior phoneguy797 7 24,391 04-13-2017 09:33 AM
Last Post: auch

Forum Jump:


User(s) browsing this thread:

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication