[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Allow DND to be active by default
Author Message
andrewm Offline
Junior Member
**

Posts: 10
Joined: Nov 2012
Reputation: 0
Post: #1
Allow DND to be active by default
Currently when a phone reboots, the DND is always turned off. That's not always appropriate, eg for some of our remote users, who also have a physical 'parallel' phone in our office building.

Instead what is needed is to be able do one of the following:

Either 1) Be able to provision the phone to optionally start with DND activated
or 2) Remember the DND state between phone reboots
(This post was last modified: 01-29-2015 07:41 AM by andrewm.)
01-29-2015 07:40 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
James_Yealink Offline
Administrator
*******

Posts: 1,159
Joined: Aug 2014
Reputation: 8
Post: #2
RE: Allow DND to be active by default
Hi Andrew,

The DND status should remain when phone reboot, can you let me know your phone model and phone firmware?

Regards,
James
01-29-2015 07:59 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
andrewm Offline
Junior Member
**

Posts: 10
Joined: Nov 2012
Reputation: 0
Post: #3
RE: Allow DND to be active by default
(01-29-2015 07:59 PM)Yealink_James Wrote:  The DND status should remain when phone reboot, can you let me know your phone model and phone firmware?
T32's & T38's with varying firmware.

I just tried on multiple different phones, and it looks like for some the DND persists (eg a test phone running 38.70.0.140), but not others (eg 38.70.0.125, 32.70.0.125). So what is the minimum firmware where this feature became available?

Note we stopped upgrading the firmware in our production phones beyond v.125, because we were waiting for changes made in 38.70.0.140 to be made generally available in both T38 & T32 - something we still don't see anything about in the latest release notes more than 15 months later. Equally, I don't see anything about DND changes in the release notes - so please advise as to its availability on the T3x series firmware!
01-31-2015 10:04 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
CWR Offline
Moderator
*****

Posts: 717
Joined: May 2013
Reputation: 7
Post: #4
RE: Allow DND to be active by default
The 3x firmware is not in active production... So unless you have a compelling feature and convince them to add it - you won't see anything posted.

Craig Reilly
MCSA, 3cx Advanced Certified
Scottsdale, AZ
02-01-2015 04:34 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  CDP Enabled by default GIWM 1 8,338 08-18-2017 09:27 AM
Last Post: anonymous1711612242218
  Default answer using speakerphone benhyman 3 13,387 08-07-2013 04:55 PM
Last Post: Yealink Support

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication