[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Calling from the call log
Author Message
firmtel Offline
Junior Member
**

Posts: 7
Joined: Jun 2014
Reputation: 0
Post: #1
Calling from the call log
Dear sir/madam

Where using a T46G/T48G in combination with freeswitch PBX solution.
T46G firmware: 28.72.188.16
T48G firmware: 35.72.188.7

When we wanna make a call from the call log it's calling to our own caller id instead of the number displayed in the log.

For example i call +3175453xx and i wanna call the same number in the log it's calling my own number. When you look in the log details i see the name of the called number and as number my own number. Ir's only behaving like this in outgoing calls. Incoming calls i can call back.

The odd thing is the T41P and W52P doesn't have this problem so i kinda ruled a PBX problem out. I also compared every setting between models and nothing seem to solve this issue.

In the attachment the PCAP of a failed call it might help


Attached File(s)
.pcap  28.72.188.16_13_7_20.pcap (Size: 460.27 KB / Downloads: 3)
01-12-2015 06:08 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
CWR Offline
Moderator
*****

Posts: 717
Joined: May 2013
Reputation: 7
Post: #2
RE: Calling from the call log
I just tested this on a T46 with Firmware 28.71.0.224.
I found an outgoing call in the "Phones Call Info" List and clicked. It dialed the number.

The Wireshark shows that 2006 is the extension being dialed - so it is the phone.

Can you try another firmware?
28.71.0.224 is here: http://yealink.com/Upload/3CX/28.71.0.224.zip

Craig Reilly
MCSA, 3cx Advanced Certified
Scottsdale, AZ
(This post was last modified: 01-13-2015 02:30 AM by CWR.)
01-13-2015 02:06 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
firmtel Offline
Junior Member
**

Posts: 7
Joined: Jun 2014
Reputation: 0
Post: #3
RE: Calling from the call log
(01-13-2015 02:06 AM)craigreilly Wrote:  I just tested this on a T46 with Firmware 28.71.0.224.
I found an outgoing call in the "Phones Call Info" List and clicked. It dialed the number.

The Wireshark shows that 2006 is the extension being dialed - so it is the phone.

Can you try another firmware?
28.71.0.224 is here: http://yealink.com/Upload/3CX/28.71.0.224.zip

Unfortunately this didn't solve my problem.
01-14-2015 08:27 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
James_Yealink Offline
Administrator
*******

Posts: 1,159
Joined: Aug 2014
Reputation: 8
Post: #4
RE: Calling from the call log
Hi,

The firmware x.x.188.x is a customized firmware. I have forwarded it to our specific technology guys. They will follow up soon.

Regards,
James
01-14-2015 08:57 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
firmtel Offline
Junior Member
**

Posts: 7
Joined: Jun 2014
Reputation: 0
Post: #5
RE: Calling from the call log
Hi James,

First of all thanks for the help and i have some additional information what might help.

The x.x.188.x is indeed customized we get it from our dutch vendor.
Like you said is tried also the original firmware 28.71.0.224 on my own phone and the issue is still there.

Where using 2600 Hertz freeswitch PBX solution. The T46 is extracting the number from the field "in-house calls" caller id of our PBX. In our case (and also with our customers) the default is our internal number 2xxx. When i enter in that field any random number the phone is calling that specific number. I also have support ticket open with 2600 Hertz as it's not clear on what side the problem lies as the T41 and W52P aren't showing this behavior.

There seems to be a difference in the answers from the SBC (5.172.222.5):
In the packet 389 the 183 session progress has remote party ID "2006"
In packet 434 the 200 OK has a remote party ID "31162232000"
It looks like the phone saves the progression caller id and not the 200 OK ID
(This post was last modified: 01-14-2015 09:57 PM by firmtel.)
01-14-2015 09:50 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  MP56 Auto Answer Teams Call perryhill@polk-county.net 0 953 06-03-2024 09:37 PM
Last Post: perryhill@polk-county.net
  MP50 ends call in some phone trees TRK45 0 1,983 05-10-2023 12:19 AM
Last Post: TRK45
  W60B - LDAP - Missing names in call history Scherm 0 1,957 03-07-2023 02:06 AM
Last Post: Scherm
  MP56 - MS Teams Call Queue name not showing grahamhosking 1 4,774 03-03-2023 05:59 AM
Last Post: MSinclair@bunker.technology
  MP50 - Unable to use pound (#) key during a phone call Alexandre Cottinet 0 3,338 02-14-2023 10:28 PM
Last Post: Alexandre Cottinet
  MP50 won't initiate a call on a Mac (Big Sur) computer? microdaft 2 9,161 05-31-2022 01:54 AM
Last Post: Christianpoulton
Brick MP50 stuck after call transfer af@benenden.school 4 11,478 12-22-2021 07:24 PM
Last Post: af@benenden.school
  Cannot disable audible Park notifications during active call livehappy42 3 7,020 11-13-2021 09:11 AM
Last Post: livehappy42
  T57W Call Park Alert bcramer 1 7,514 10-29-2021 05:33 AM
Last Post: livehappy42
Sad T22P No Sound on Call Pick Up oaltinsoy853 1 6,552 10-19-2021 07:22 PM
Last Post: complex1

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication