[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
SIP-T20P: Register Failedand and no Call
Author Message
sylviog.jr Offline
Junior Member
**

Posts: 8
Joined: Jan 2015
Reputation: 0
Post: #11
RE: SIP-T20P: Register Failedand and no Call
Dear Daniel , I have already connected 12 phones here. Thanks again. The information I have written are wrong. We have 3 branchs in another cities and need to connect many phones there accessing this network here. My only option is the Internet.
But I am confused on how to use STUN server and client. (http://www.3cx.com/pbx/what-is-a-stun-server/).
If you can point me to any tutorial to do this. Need a program? Where can I download? 3CX have?

Thank you for your attention.

Sylvio
(This post was last modified: 01-19-2015 09:48 PM by sylviog.jr.)
01-19-2015 09:12 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yealink_Daniel Offline
Super Moderator
******

Posts: 39
Joined: Jan 2015
Reputation: 0
Post: #12
RE: SIP-T20P: Register Failedand and no Call
Dear Sylvio,

About your scene, if you want the other phones which in other cities of your company register in your PBX and be able to communicate each other, I suggest you use our OpenVPN function.

About how to install the OpenVPN Server and how to configure this feature on IP phone, please refer the guide below.
Link:OpenVPN_Feature_on_Yealink_IP_Phones

About STUN, please refer these steps to configure the parameters in your phones:
To configure NAT traversal and STUN server via web user interface:
1. Click on Account->Register.
2. Select the desired account from the pull-down list of Account.
3. Select STUN from the pull-down list of NAT.
4. Enter the IP address or the domain name of the STUN server in the STUN Server
field.
   
5. Click Confirm to accept the change.

For more information, please refer page 418 of the Administrator Guide.
Link: Yealink_SIP-T2xP_IP_Phones_Administrator_Guide_V73_40

About how to build a STUN server, could you please contact your server provider or administrator for help ?
Because it’s build in your local and provide by your server provider or administrator.

Thank you.

Best Regards
Daniel
01-21-2015 10:16 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
sylviog.jr Offline
Junior Member
**

Posts: 8
Joined: Jan 2015
Reputation: 0
Post: #13
RE: SIP-T20P: Register Failedand and no Call
Dear Daniel,

I have progress on VPN but believed that setting up the modem or access router , opening port 1723 for VPN connection, could connect at least one phone in each branch .
I have to test :

1 computer on my local network that would be the client.
I set up a VPN connection with public IP. Setup:
Geral: 177.134.30.106
Login : sylvio
Password: xxx
I visit the " yougetsignal " and tested the port 1723 (server). It´s open . I got the server remote address "177.134.30.106".

1 computer ( server ) connected to ADSL ( GVT in Brazil , only for testing ) ,
Modem:
DHCP: 192.168.25.2 to 192.168.25.240
Modem opening port 1723
Port forwarding port 1723 to ip PC 192.168.25.104 (router)
DMZ off
UPNP on
DDNS off

Router simulating a server:
Router IP : 192.168.0.1
DHCP: range 192.168.0.100 to 199
Virtual Server List :
Name: VPN
Application: PPTP
Port : 1723
Protocol: TCP
IP : 192.168.0.100

Config the input connection to VPN (server)
Login : sylvio (administrator)
Password: xxx
IP range 192.168.0.100 to 199 .

error:
error 800 the remote connection was not made ​​because the attempted vpn tunnels failed

If I can not solve this not be able to install the phones.

Please help me ,

Sylvio
02-04-2015 11:36 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yealink_Daniel Offline
Super Moderator
******

Posts: 39
Joined: Jan 2015
Reputation: 0
Post: #14
RE: SIP-T20P: Register Failedand and no Call
Hi,

Thank you for your feedback.
I will investigate about this and will let you know the result as soon as possible.

Best regards
02-07-2015 01:04 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yealink_Daniel Offline
Super Moderator
******

Posts: 39
Joined: Jan 2015
Reputation: 0
Post: #15
RE: SIP-T20P: Register Failedand and no Call
Dear Sylviog,

Sorry for reply you late.
About your issue, could you please help to get a Level 6 system log, PCAP trance and a config.bin for our investigate.
Please refer the FAQ:http://forum.yealink.com/forum/showthread.php?tid=1319

Thank you for your cooperation.

Best regards
Daniel
03-03-2015 04:45 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  permisson to Call list on t46S ist denied wolfi30 1 288 03-04-2024 02:08 PM
Last Post: wolfi30
  permission denied to call list wolfi30 0 230 02-23-2024 08:54 PM
Last Post: wolfi30
  MP54 Call Forwarding pureit2018 0 494 11-23-2023 07:58 AM
Last Post: pureit2018
  Enhanced DSS Key - Conference Call joe1st 0 521 11-11-2023 05:27 AM
Last Post: joe1st
  Unable to Answer call without pressing Line 1 TheKirbyGroup 0 646 11-03-2023 11:04 PM
Last Post: TheKirbyGroup
  Yealink T28 setup audible ring on 2nd incoming call JeffWilkinson 20 86,315 10-18-2023 12:59 PM
Last Post: sles
  Picking up a call does not display Caller's Name oliv 0 1,296 04-19-2023 04:25 PM
Last Post: oliv
  Yealink T27P -Incoming call issue rsarceno 0 1,244 01-25-2023 08:54 AM
Last Post: rsarceno
Information T27G call foward all Aerium 0 1,332 09-13-2022 04:36 PM
Last Post: Aerium
  Remebering call volume settings SystemCraft 1 2,524 07-15-2022 07:42 PM
Last Post: complex1

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication