New Forum system requires email address which you used to apply for your account to replace your original username. Password stays the same.Please see this post for more details
http://forum.yealink.com/forum/showthread.php?tid=40344

Yealink Test Club has been officially launched. Please visit post below to get detail information. Come and join us!
http://forum.yealink.com/forum/announcements.php?aid=18

We just had the YMCS online and we are also working on the features plan on the future versions, in this regard we are need to hear your voice about the YMCS.
Please visit : http://forum.yealink.com/forum/showthread.php?tid=42322


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
SIP-T20P: Register Failedand and no Call
Author Message
sylviog.jr Offline
Junior Member
**

Posts: 8
Joined: Jan 2015
Reputation: 0
Post: #1
SIP-T20P: Register Failedand and no Call
Dear sirs, we have any IP Phones model T20P. I need a help. We connect 2 T20P in 2 notebooks (connected a local server) and make the follows configurations for test:

Notebook 1:
IPv4
Static IP 192.168.1.192
Mask 255.255.255.0
Gateway 192.168.1.1
DNS 192.168.1.1
Display Name Flavio
Label Flavio
Register name 501
User name 501
SIP Server 1
Server Host 192.168.1.1 (put the gateway)
Result: Account 1 501@192.168.1.1 : Register Failed

Notebook 2: The same above, but with this difference on second:
Static IP 192.168.1.191
Display Name Sylvio
Label Sylvio
Register name 500
User name 500
Result: Account 1 500@192.168.1.1 : Register Failed

Please, where I am going wrong? Dont Register and the call 500 or 501 between thers and not connetc. Sorry my english. I live in Brazil.
See print of my config
[Image: mini_150108062132111230.jpg] [Image: mini_150108062133379801.jpg] [Image: mini_150108062134606417.jpg] [Image: mini_150108062136642349.jpg] [Image: mini_150108062137945062.jpg] [Image: mini_150108062139573542.jpg] [Image: mini_150108062140797817.jpg] [Image: mini_150108062130925148.jpg]

Thanks in advance,
Sylvio Gomes Junior
01-09-2015 01:29 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yealink_Daniel Offline
Super Moderator
******

Posts: 39
Joined: Jan 2015
Reputation: 0
Post: #2
RE: SIP-T20P: Register Failedand and no Call
Dear Sylviog,

Please successfully configure the network setting at first.
Then register your phone. After that, the phone is worked.

1. To make your phone work, we should have a PBX(a software in your local pc or a server in your server provider) which provide account for phone.
Then make sure the 2 phone and the PBX are connectable, and register.

2.About “Server Host”, please make sure “Static IP 192.168.1.192” be able to connect to “Server Host 192.168.1.1”.
If you want make your notebook as your PBX server, the server host is the ip of your notebook.
Otherwise, please ask your network administrator.

3.About register.
Register name, Password and Server Host is provided by your service provider or your PBX administrator.
Please ask them to give you these information.

For more information, please refer page 4 of our Quick Start Guide of our website.
Link: Yealink SIP-T20P Quick Start Guide V73_40

By the way, I have reply your mail (you sent to Yealink Support) early, it seems like you did’t received it, please help to check your mail inbox.
If there is any questions, please do not hesitate to contact me by Forum or mail.

Thank you.
Best Regards
Daniel
01-09-2015 03:51 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
sylviog.jr Offline
Junior Member
**

Posts: 8
Joined: Jan 2015
Reputation: 0
Post: #3
RE: SIP-T20P: Register Failedand and no Call
Dear Daniel,

Thanks for your support

We have five branches connected to a windows server and different cities . I need to put a phone in each branch using voip . In this way would be easier for you help me?

You must install a software to create a voip server on our server?

Best Regards,
Sylvio Gomes Junior
(This post was last modified: 01-13-2015 01:36 AM by sylviog.jr.)
01-13-2015 01:35 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
ModCraig Offline
Moderator
*****

Posts: 716
Joined: May 2013
Reputation: 7
Post: #4
RE: SIP-T20P: Register Failedand and no Call
What they are saying is you need a PBX to register to.
What PBS is running on the Laptop that you are trying to connect to?
The PBX Provides the credentials for the phone.

Craig Reilly
MCSA, 3cx Advanced Certified
Scottsdale, AZ
01-13-2015 02:02 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
sylviog.jr Offline
Junior Member
**

Posts: 8
Joined: Jan 2015
Reputation: 0
Post: #5
RE: SIP-T20P: Register Failedand and no Call
Dear craigreilly, thaks

No. I only have network connection, voip phones and internet access . Our pbx is not connected to the network.

I believe so I need a voip system installed on my notebook. Correct?

Regards,
Sylvio Gomes Junior
01-13-2015 02:15 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
ModCraig Offline
Moderator
*****

Posts: 716
Joined: May 2013
Reputation: 7
Post: #6
RE: SIP-T20P: Register Failedand and no Call
Yes.
For testing, I can recommend 3cx. It supports Yealink, works on Windows, and has a DEMO Mode as well as a FREE VERSION which allows max 2 calls at same time.
Grandstream makes an appliance called a UCM6100 (4 different models here).

There is also many others that works on Linux that I can not comment about as I have no experience using them.

Craig Reilly
MCSA, 3cx Advanced Certified
Scottsdale, AZ
01-13-2015 02:28 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
sylviog.jr Offline
Junior Member
**

Posts: 8
Joined: Jan 2015
Reputation: 0
Post: #7
RE: SIP-T20P: Register Failedand and no Call
Dear craigreilly,

Sorry, but:
We installed 3CX Phone System successfully initially including 2 Voip phones " 500 and 501" . In the configuration of Yealink T20, in account , SIP Server 1 , Server Host , I am using the ip of one of the two notebooks " 192.168.1.46 " where is installed 3CX . Is that correct?
Again : 501@192.168.1.46 : Register Failed.
What did might be happening?

Regards,
Sylvio
01-13-2015 03:46 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
ModCraig Offline
Moderator
*****

Posts: 716
Joined: May 2013
Reputation: 7
Post: #8
RE: SIP-T20P: Register Failedand and no Call
IS the widows firewall on or off?
The firewall would be blocking 5060 Sip registration.
If possible, also put the laptop on a fixed ip...
3cx can provision the phones automatically if they can see each other.

And I think you mean you added 2 extensions - 500 and 501. The phones are Yealink T20's (Endpoints).

Craig Reilly
MCSA, 3cx Advanced Certified
Scottsdale, AZ
(This post was last modified: 01-13-2015 03:57 AM by ModCraig.)
01-13-2015 03:57 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
sylviog.jr Offline
Junior Member
**

Posts: 8
Joined: Jan 2015
Reputation: 0
Post: #9
RE: SIP-T20P: Register Failedand and no Call
Touché my friend. The firewell was blocking the 5060. You got it right. All working ok.

the other branch the server is connected with the here and the gateway is 192.168.1.6. If I plug one of the two phones in the branch office , will work without changes. Is that correct?
Thanks again .

Sylvio Gomes Junior
(This post was last modified: 01-14-2015 08:43 PM by sylviog.jr.)
01-14-2015 07:25 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yealink_Daniel Offline
Super Moderator
******

Posts: 39
Joined: Jan 2015
Reputation: 0
Post: #10
RE: SIP-T20P: Register Failedand and no Call
Dear Sylvio,

Could you please tell me some details of the problem ? Then I will help you to fix it.
What do you mean about work without change if you plug one of the two phones in the branch office ?

Thank you.
Daniel
01-19-2015 09:05 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Can't register T21P E2 phone LOU 3 5,187 04-06-2019 08:58 AM
Last Post: Timmy7
  USB call recording David D 5 3,283 05-15-2018 07:00 PM
Last Post: YOVU Cloud
  T27G no longer option to transfer call during ringing state DmitryTsyganov 1 1,245 04-16-2018 11:16 AM
Last Post: Travis_Yealink
  Call Park customization James Martin 2 1,480 04-02-2018 06:04 PM
Last Post: James Martin
  Current time not displayed when a call is missed John62 0 963 02-16-2018 05:07 PM
Last Post: John62
  Call Parking - Yealink Phone - Asterisk 11 vs 13 Velocita Technology 1 1,676 12-26-2017 06:06 AM
Last Post: Lucia_Yealink
  Call Waiting Ring Option moshebt 2 1,716 12-15-2017 08:30 AM
Last Post: Elaine_Yealink
  Delayed Action URL call MaartenBode 2 2,657 12-01-2017 09:21 AM
Last Post: AdamNTX
  T27G change programmable key on incoming call EIP 3 2,160 11-28-2017 07:30 AM
Last Post: Evan_Yealink
  Call Park Mode transfer on T48G jasonblewis 2 2,586 11-09-2017 01:26 AM
Last Post: Aishion_Yealink

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication