[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Ringing on second call - 3CX
Author Message
ShawnDev Offline
Junior Member
**

Posts: 12
Joined: Oct 2014
Reputation: 0
Post: #1
Ringing on second call - 3CX
Right now on a T46g phone if a second call comes in (using 3CX) the phone doesn't ring. It makes a call waiting tone and displays the call on the phone display. Is there a way to make the second call generate a ringing sound in addition to or instead of the call waiting tone?

Thanks in advance!
01-06-2015 09:01 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
rlsabin Offline
Moderator
*****

Posts: 61
Joined: Nov 2012
Reputation: 2
Post: #2
RE: Ringing on second call - 3CX
The ability for the phone to have an audible ring for a second incoming call has been requested many times on this forum but for some reason Yealink has chosen to ignore the requests and has not added this ability to their phones.
01-06-2015 10:10 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
James_Yealink Offline
Administrator
*******

Posts: 1,159
Joined: Aug 2014
Reputation: 8
Post: #3
RE: Ringing on second call - 3CX
Hi,

May I know won't the second ring interference the first call?
If you use a handset then second ring should play through both handset+speaker or only one channel?
If you use speaker then the second ring will play through speaker? Then the first call can't be hear clearly.

What's your desiraable design?

Regards,
James
01-06-2015 03:02 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
ShawnDev Offline
Junior Member
**

Posts: 12
Joined: Oct 2014
Reputation: 0
Post: #4
RE: Ringing on second call - 3CX
The ringing should be heard on the base speaker only. If the user is using speakerphone it will interrupt the call. However this is primarily needed for staff that do nothing but answer phones. They don't use speakerphones. Every phone system I've replaced the phone still rings when a new call comes in which is what the Operator/Reception staff are used to.

I suppose one reason why it hasn't been done is that on old traditional phones the ringer, handset & speaker (for speakerphone) are separate. On VOIP phones the ringer comes through the speaker, but it's still a feature that we need the option to have.
01-06-2015 11:06 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
James_Yealink Offline
Administrator
*******

Posts: 1,159
Joined: Aug 2014
Reputation: 8
Post: #5
RE: Ringing on second call - 3CX
Hi,

Finally the feature is accepted by our product department and it will be desinged in V81 firmware.(Since the V80 is not desgined as "feature adding" firmware)

According to the design it seems that there will be three options, call waiting tone, ring, silent.

Regards,
James
01-07-2015 07:48 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
ShawnDev Offline
Junior Member
**

Posts: 12
Joined: Oct 2014
Reputation: 0
Post: #6
RE: Ringing on second call - 3CX
Sounds good. That will make several of my clients very happy. I'm not sure I understand about the firmware though aren't we on v73?
01-08-2015 12:23 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
cadillackid Offline
Junior Member
**

Posts: 26
Joined: Jan 2015
Reputation: 0
Post: #7
RE: Ringing on second call - 3CX
is there any update on a release time for this? I want to let the customers know.. for my front desk operators this is somrthing they require before they will let me swap Aastra phones out for the New Yealink as an operator console.
02-04-2015 05:26 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
CWR Offline
Moderator
*****

Posts: 717
Joined: May 2013
Reputation: 7
Post: #8
RE: Ringing on second call - 3CX
Not sure how your inbound calls are routing but have you considered changing the Admin to the Yealink and putting the Aastra nearby for now and let it ring.
(A ring group with both phones ?)

Craig Reilly
MCSA, 3cx Advanced Certified
Scottsdale, AZ
02-04-2015 05:53 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
James_Yealink Offline
Administrator
*******

Posts: 1,159
Joined: Aug 2014
Reputation: 8
Post: #9
RE: Ringing on second call - 3CX
Don't have a certain time schedule now. Our R&D are discussing about adding the feature in V80 or V81.
If in V80 then it will be available in Q2 2015. The time of V81 has not been confirmed now.

Regards,
James
02-04-2015 03:53 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
AVG-Don Offline
Junior Member
**

Posts: 1
Joined: Mar 2015
Reputation: 0
Post: #10
RE: Ringing on second call - 3CX
(02-04-2015 03:53 PM)Yealink_James Wrote:  Don't have a certain time schedule now. Our R&D are discussing about adding the feature in V80 or V81.
If in V80 then it will be available in Q2 2015. The time of V81 has not been confirmed now.

Could you keep us updated on this? We are looking for this feature too (in combination with FreePBX). This is the first feature that we found lacking in our test setup.

We are currently intensively using this feature with our current PBX so that colleagues can pickup the call (using pickup groups) when someone is currently calling and a second call arrives. If the call waiting tone is only played through the handset, the other people in the room can't hear that another call has arrived.

Thank you in advance.

Kind regards, Don
03-04-2015 12:33 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  permisson to Call list on t46S ist denied wolfi30 1 288 03-04-2024 02:08 PM
Last Post: wolfi30
  permission denied to call list wolfi30 0 230 02-23-2024 08:54 PM
Last Post: wolfi30
  MP54 Call Forwarding pureit2018 0 494 11-23-2023 07:58 AM
Last Post: pureit2018
  Enhanced DSS Key - Conference Call joe1st 0 521 11-11-2023 05:27 AM
Last Post: joe1st
  Unable to Answer call without pressing Line 1 TheKirbyGroup 0 646 11-03-2023 11:04 PM
Last Post: TheKirbyGroup
  Yealink T28 setup audible ring on 2nd incoming call JeffWilkinson 20 86,315 10-18-2023 12:59 PM
Last Post: sles
  Picking up a call does not display Caller's Name oliv 0 1,296 04-19-2023 04:25 PM
Last Post: oliv
  Yealink T27P -Incoming call issue rsarceno 0 1,244 01-25-2023 08:54 AM
Last Post: rsarceno
Information T27G call foward all Aerium 0 1,332 09-13-2022 04:36 PM
Last Post: Aerium
  Remebering call volume settings SystemCraft 1 2,524 07-15-2022 07:42 PM
Last Post: complex1

Forum Jump:


User(s) browsing this thread:

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication