[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
xml assistance
Author Message
bsanders Offline
Junior Member
**

Posts: 31
Joined: May 2014
Reputation: 0
Post: #1
xml assistance
Hello,

Using Yealink T46 with 3CX.

I am looking to configure a single DSSkey to trigger two dial codes.

Examples:
DSSkey1 - available presence (*30) and 3CX emergency code (*66)
DSSkey2 - away presence (*31) and 3CX emergency code (*66)

I have been experimenting with "ExecuteItem URI="Dial:" but can't get it to work with two dial codes.

Any assistance is appreciated.

thanks
(This post was last modified: 12-24-2014 04:14 AM by bsanders.)
12-24-2014 12:50 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
CWR Offline
Moderator
*****

Posts: 717
Joined: May 2013
Reputation: 7
Post: #2
RE: xml assistance
Only the DND key has the ability to know its status and dial 2 different codes.
You would have to write an XML script to bring up a menu and allow the person to select which option they need.

Check this out (used on T38, but should be similar): https://www.dropbox.com/s/76btdgthwvj8nng/xml.zip?dl=0

I use this on the receptionist phone and if she is not there, someone else can goto the phone and set to "AWAY" which goes to a ring group instead. This might be helpful for your situation.

(Remember that on 3cx, *60 and *61 are DND and are not "Presence/Profile Changes" - those are typically *30,*31,*32,*33,*34

Craig Reilly
MCSA, 3cx Advanced Certified
Scottsdale, AZ
(This post was last modified: 12-24-2014 03:39 AM by CWR.)
12-24-2014 03:37 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
bsanders Offline
Junior Member
**

Posts: 31
Joined: May 2014
Reputation: 0
Post: #3
RE: xml assistance
Craig,

Not sure why I put DND codes in my example I meant presence code (edited OP).

Thanks for your example. In my situation I need one DSSkey to trigger our closed action which are two separate codes (*31 presence away and *66 3CX emergency code)

A non-working example but the single xml would be something to the effect of:

<YealinkIPPhoneExecute Beep="no">
<ExecuteItem URI="Dial:*30"/>
<ExecuteItem URI="Dial:*66"/>
...
</YealinkIPPhoneExecute>

Anything like this possible?

Thanks.
(This post was last modified: 12-24-2014 04:32 AM by bsanders.)
12-24-2014 04:31 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
CWR Offline
Moderator
*****

Posts: 717
Joined: May 2013
Reputation: 7
Post: #4
RE: xml assistance
I am not sure you can get 2 dialing commands to process.... is there an issue with using all *3x codes as we do?
*30,*31,*32

Craig Reilly
MCSA, 3cx Advanced Certified
Scottsdale, AZ
12-24-2014 05:25 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  T3x config assistance andrewm 1 9,937 11-23-2012 11:19 AM
Last Post: Larry

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication