[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
T26P printable labels?
Author Message
Radvoc-Jon Offline
Junior Member
**

Posts: 3
Joined: Dec 2014
Reputation: 0
Post: #1
T26P printable labels?
Hi all-

I've read through several threads on here, to no avail. Has anyone discovered a way to print extension names for the BLF keys on the T26P/T28P, directly on the label itself? Just like all of you, I don't have the time (or patience) to sit there and cut out the holes for the BLF keys if I print the labels on blank paper. Has anyone found a Desi template that will work?

Thanks.
12-13-2014 08:19 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
rlsabin Offline
Moderator
*****

Posts: 61
Joined: Nov 2012
Reputation: 2
Post: #2
RE: T26P printable labels?
Jon
I think you will have to actually buy the sheets from Desi. I dont believe there is any way to print on the strip that comes with the phone. Desi part number 13795 is designed specifically for the T26P and T28P. We have been using them for a couple of years and they work well.

Rick
(This post was last modified: 12-13-2014 10:53 PM by rlsabin.)
12-13-2014 10:50 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
jolouis Offline
Moderator
*****

Posts: 334
Joined: Oct 2013
Reputation: 5
Post: #3
RE: T26P printable labels?
You can print directly on the labels that come with the phones if you have a little bit of patience. You can use the basic template system that we have hosted on our site:

Toben - Yealink T26/T28 Template

Here's the process we use:
1) Go to the above URL, and print it just as is. (don't fill anything in yet). This gives you a print template.
2) Take the desired label strips from your phones, and with a little bit of scotch tape attach the labels so they overlay the printed outlines of the label strips.
3) Put your desired markings/values into the green fields on the webpage.
4) Press the "Toggle Label Visibility" button to hide the template outlines
5) Put your piece of paper with the labels attached to it back into your printer, facing the same way as it was originally.
6) Print again, and voila you're done.

Sounds a bit tedious but once you get the hang of it it's actually very quick and easy. Maybe not quite as easy as the Desi's, but we also don't do hundreds of them...
12-16-2014 09:54 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
Question Problem with forwarding call after no answer - SIP-T26P / SIP-T27P Yves 1 3,935 12-30-2016 06:52 AM
Last Post: Travis_Yealink
  T26P/T28p BLF light not working after firmware upgrade futures 2 9,151 01-27-2016 11:29 PM
Last Post: janduy.manzanos@gmail.com
  T26P Correct Firmware joao.mortagua 1 2,771 01-14-2016 05:55 AM
Last Post: Klaus_Yealink
  SIP-T26P JuanMostert 1 3,038 01-12-2015 04:00 PM
Last Post: James_Yealink
  T26P programming questions edlentz 3 4,903 10-23-2014 10:39 AM
Last Post: James_Yealink
  Ring Central and the Yealink T26P oragroup 5 9,484 08-29-2014 10:54 AM
Last Post: Wilson_Yealink
  T26p and zultys and voicemail clarksavagejr 1 3,462 06-10-2014 02:11 PM
Last Post: Yealink Support
  T26P Questions Mark.woods 2 4,180 06-05-2014 09:19 PM
Last Post: Mark.woods
  T-19 - Default Softkey Labels Bryan Nelson 4 7,033 05-13-2014 03:49 AM
Last Post: Bryan Nelson
  PFSense OpenVPN T26P mike.adams@agenda-it.co.uk 3 5,192 03-19-2014 07:49 PM
Last Post: Yealink Support

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication