T28p local SIP port

[arielgrin]

Hi all: I have a T28p phone, hardware version 1.0.0.4 and firmware version 2.72.0.80

Even though local SIP port is set to 5060, the phone is registering itself with local SIP port 5062. If I change it to other port, for example 5061 or 5079, the phone registers with the correct local SIP port, but if I set it to 5060, it registers with 5062.

[Yealink_Jim]

Hi,

Cause the port 5060 is occupied by direct ip call. So you can't use 5060 as local SIP port.