[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
*97 voicemail
Author Message
rick@firstchoicecomputers.com Offline
Junior Member
**

Posts: 2
Joined: Dec 2014
Reputation: 0
Post: #1
*97 voicemail
I am familiar with the phones and have many in use. The last two I setup do not allow you to connect to voicemail ? I set the *97 in the voicemail setting of account and advanced then voicemail but when you press the voicemail button it displays *97 but never connects. Same if you manually dial *97 ? Cannot see to connect to get messages ???

one other issue is on my t22p which I have had for a year and have 3 lines programmed, I can press the message button or dial *97 and connect to voicemail fine but if I press line 2 or 3 and then the message button or dial *97 it never connects ??? I have to dial *98 and then a mailbox and password to access the mail... seems very strange?
(This post was last modified: 12-05-2014 02:39 PM by rick@firstchoicecomputers.com.)
12-05-2014 02:36 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
CWR Offline
Moderator
*****

Posts: 716
Joined: May 2013
Reputation: 7
Post: #2
RE: *97 voicemail
Sounds like you are connecting to a UCM 610x?
Does Grandstream Forums have any suggestions?

I only connect GS Phones to my UCM, or Analog phones on the FXS.

Craig Reilly
MCSA, 3cx Advanced Certified
Scottsdale, AZ
(This post was last modified: 12-05-2014 04:21 PM by CWR.)
12-05-2014 04:20 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
rick@firstchoicecomputers.com Offline
Junior Member
**

Posts: 2
Joined: Dec 2014
Reputation: 0
Post: #3
RE: *97 voicemail
Nothing to do with a Grandstream PBX, it is an elastix box and many phones work fine on it like Grandstream 2100 or Aastra 6755i and so one. It just seems to be an issue with these last two Yealink T22P units not connecting to the elastix box voicemail. *97 always works when dialed direct but not on these two and I flashed them to the newest firmware already.
12-06-2014 03:09 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yealink_Peter Offline
Super Moderator
******

Posts: 141
Joined: Nov 2014
Reputation: 2
Post: #4
RE: *97 voicemail
(12-06-2014 03:09 AM)rick@firstchoicecomputers.com Wrote:  Nothing to do with a Grandstream PBX, it is an elastix box and many phones work fine on it like Grandstream 2100 or Aastra 6755i and so one. It just seems to be an issue with these last two Yealink T22P units not connecting to the elastix box voicemail. *97 always works when dialed direct but not on these two and I flashed them to the newest firmware already.

Hi rick,

It seems strange for this failure.
could you please upload a PCAP trace and phone configuration file? So that we can find more about what happened.
thanks.

B.Regards,
Peter
12-08-2014 06:11 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Voicemail Settings on T46S lansend 2 4,297 02-07-2019 02:33 PM
Last Post: jolouis
  Enable Periodic Voicemail beeps Atechhito 3 7,735 05-23-2016 11:56 AM
Last Post: Darrin Higginson
  Other extensions voicemail from DSS rapix 1 5,383 11-06-2015 02:41 AM
Last Post: CWR
  Voicemail Lamp on Programmable Key nssimpson 2 6,449 09-12-2015 12:35 AM
Last Post: John_K
  BLF/MWI key for shared voicemail box Jordan 2 15,125 09-11-2015 07:19 AM
Last Post: nssimpson
  Mask/hide Voicemail number? tom.hill54@gmail.com 2 6,710 08-26-2014 08:40 PM
Last Post: tom.hill54@gmail.com
  T26P Voicemail rrtech 3 7,734 08-18-2014 05:56 AM
Last Post: rrtech
  Setting up Voicemail on T22P claredotcom 2 13,004 04-11-2014 02:00 PM
Last Post: Yealink Support
  T46G can't get voicemail dwoods 2 10,101 01-03-2014 12:42 AM
Last Post: dwoods

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication