[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
T26 Park Button problem Asterisk v1.8
Author Message
Yealink Support Offline
Administrator
*******

Posts: 2,683
Joined: Dec 2012
Reputation: 25
Post: #11
RE: T26 Park Button problem Asterisk v1.8
Do you test the latest version of T26?
Please give me more details about this issue.
03-13-2014 03:53 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
strabuzano Offline
Junior Member
**

Posts: 8
Joined: Mar 2014
Reputation: 0
Post: #12
RE: T26 Park Button problem Asterisk v1.8
(03-13-2014 03:53 PM)Yealink Support Wrote:  Do you test the latest version of T26?
Please give me more details about this issue.

Running
freepbx 2.11.0.24 with asterisk 11.3.0

Phone
Yealink t26
Firmware Version 6.72.0.30
Hardware Version 4.0.1.38

Parking Lot 400
Parking Spaces 3
Parking Spaces Number 401, 402, 403

Parking Lot code from FreePBX
*2nn: Attended Transfer call into Park lot nnn (It will announce the slot back to you)


Scenario 1

Setup

DSS KEY
Memory 1 Type - Call Park | Value - 400 | Line 1

Line Key
Line Key 1 Type - BLF | Value - 401 | Line 1 | Extension 401

Problem
Parking Key works, line key blinks indicating that the call was parked, but the parking lot anouncement is made to the caller not to the person parking the call.

Scenario 2

Setup

DSS KEY
Memory 1 Type - DTMF | Value - *2400#
Line Key
Line Key 1 Type - BLF | Value - 401 | Line 1 | Extension **

Problem
Parking key does not work correctly, when the parking key is pressed the call is parked and the parking lot is announced to the person parking the call, this is correct, but the person parking the call is now put on hold having to hang up the phone before doing anything else.
First problem is that the person parking the call must not hang up the phone until the entire dtmf value of *2400# is entered on the phone or the call gets disconnected.
Another problem is if the person who parked the call picks that call back and tries to park it again the message I'm sorry that is not a valid extension is played.
03-14-2014 01:05 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yealink Support Offline
Administrator
*******

Posts: 2,683
Joined: Dec 2012
Reputation: 25
Post: #13
RE: T26 Park Button problem Asterisk v1.8
In order to do more troubleshootings, please supply me syslog level 6, config.bin and pcap.
How to Get the Correct Syslog, Config.bin and Trace

Please supply files about scenario 1 and the first problem of scenario 2.
the re-park issue , we have found and are solving now.
03-17-2014 04:20 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
strabuzano Offline
Junior Member
**

Posts: 8
Joined: Mar 2014
Reputation: 0
Post: #14
RE: T26 Park Button problem Asterisk v1.8
(03-17-2014 04:20 PM)Yealink Support Wrote:  In order to do more troubleshootings, please supply me syslog level 6, config.bin and pcap.
How to Get the Correct Syslog, Config.bin and Trace

Please supply files about scenario 1 and the first problem of scenario 2.
the re-park issue , we have found and are solving now.

Capture attached.


Attached File(s)
.pcap  scenario2.pcap (Size: 346.82 KB / Downloads: 2)
.pcap  scenario1.pcap (Size: 141.11 KB / Downloads: 1)
03-18-2014 10:02 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yealink Support Offline
Administrator
*******

Posts: 2,683
Joined: Dec 2012
Reputation: 25
Post: #15
RE: T26 Park Button problem Asterisk v1.8
Please supply me all files including syslog(level 6), config.bin and pcap. So i can submit to our R&D for analysis.
Our engineer need these files to debug and solve issues more quickly.

In scenario 2, the first question, do you press DSSKey-DTMF to park first, then call will be on hold, you need to press DssKey-DTMF again, that call can be parked successful.
(This post was last modified: 03-21-2014 03:42 PM by Yealink Support.)
03-21-2014 03:22 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
strabuzano Offline
Junior Member
**

Posts: 8
Joined: Mar 2014
Reputation: 0
Post: #16
RE: T26 Park Button problem Asterisk v1.8
(03-21-2014 03:22 PM)Yealink Support Wrote:  Please supply me all files including syslog(level 6), config.bin and pcap. So i can submit to our R&D for analysis.
Our engineer need these files to debug and solve issues more quickly.

In scenario 2, the first question, do you press DSSKey-DTMF to park first, then call will be on hold, you need to press DssKey-DTMF again, that call can be parked successful.

Sorry for the delay.

(03-21-2014 03:22 PM)Yealink Support Wrote:  Please supply me all files including syslog(level 6), config.bin and pcap. So i can submit to our R&D for analysis.
Our engineer need these files to debug and solve issues more quickly.

In scenario 2, the first question, do you press DSSKey-DTMF to park first, then call will be on hold, you need to press DssKey-DTMF again, that call can be parked successful.

When I press the DSSKey-DTMF the call is parked it is not put on hold. The call is parked and I hear the parking lot the call was parked on, the call is placed on the parking lot, and the person parking the call is put on hold instead of having the call terminated. Pressing the DSSKey-DTMF tries to park again but there is no call connected because the incoming call is now on the parking lot and the person parking the call is now on hold.


Attached File(s)
.bin  config (1).bin (Size: 195 KB / Downloads: 2)
.tar  syslog (1).tar (Size: 83 KB / Downloads: 1)
(This post was last modified: 03-25-2014 04:37 AM by strabuzano.)
03-25-2014 03:58 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yealink Support Offline
Administrator
*******

Posts: 2,683
Joined: Dec 2012
Reputation: 25
Post: #17
RE: T26 Park Button problem Asterisk v1.8
Thanks to your files. BTW, do you reproduce the issue and export the syslog level 6?
03-25-2014 05:21 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
strabuzano Offline
Junior Member
**

Posts: 8
Joined: Mar 2014
Reputation: 0
Post: #18
RE: T26 Park Button problem Asterisk v1.8
(03-25-2014 05:21 PM)Yealink Support Wrote:  Thanks to your files. BTW, do you reproduce the issue and export the syslog level 6?
I get the desired behavior is I press the DSSKey-DTMF key to park the call and then press the cancel softkey.
I have attached the syslog.


Attached File(s)
.tar  syslog (2).tar (Size: 303 KB / Downloads: 1)
03-27-2014 01:56 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yealink Support Offline
Administrator
*******

Posts: 2,683
Joined: Dec 2012
Reputation: 25
Post: #19
RE: T26 Park Button problem Asterisk v1.8
Hi strabuzano,

Sorry. We are confused with your scenario 2.
1. When I press the DSSKey-DTMF the call is parked it is not put on hold.
2. The call is parked and I hear the parking lot the call was parked on, the call is placed on the parking lot. So Is your call parked sucessfully?
3. And the person parking the call is put on hold instead of having the call terminated. Do you see the hold interface after hearing parking lot? We can't see this from your pcap file.
4. Pressing the DSSKey-DTMF tries to park again but there is no call connected because the incoming call is now on the parking lot and the person parking the call is now on hold. How do you judge "no call connected" and "the call is on hold"? From LCD of phone? Or do you mean though the LCD displayed the call is on hold, the call had been parked to the parking lot actually?

Can you also supply pcap of your other worked well phones such as linksys, cisco and Aastra?
04-10-2014 02:46 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
strabuzano Offline
Junior Member
**

Posts: 8
Joined: Mar 2014
Reputation: 0
Post: #20
RE: T26 Park Button problem Asterisk v1.8
(04-10-2014 02:46 PM)Yealink Support Wrote:  Hi strabuzano,

Sorry. We are confused with your scenario 2.
1. When I press the DSSKey-DTMF the call is parked it is not put on hold.
2. The call is parked and I hear the parking lot the call was parked on, the call is placed on the parking lot. So Is your call parked sucessfully?
3. And the person parking the call is put on hold instead of having the call terminated. Do you see the hold interface after hearing parking lot? We can't see this from your pcap file.
4. Pressing the DSSKey-DTMF tries to park again but there is no call connected because the incoming call is now on the parking lot and the person parking the call is now on hold. How do you judge "no call connected" and "the call is on hold"? From LCD of phone? Or do you mean though the LCD displayed the call is on hold, the call had been parked to the parking lot actually?

Can you also supply pcap of your other worked well phones such as linksys, cisco and Aastra?

Scenario 2 works likes this.

Call comes in and it is answered.
When the park button is pressed the caller is parked. The parking lot extension the call was parked on is spoken to the callee. The callee starts listening to the same MOH as the caller. I do not know if the callee is put on hold or sent to the same parking lot as the caller, I do know that both the callee and caller are listening to the same MOH.

Now if I try to press the park button again like it was suggested the numbers from the DTMF show on phone display but nothing happens.

If I hang up and then pick the call that was parked and then try to park it again I get the following message: I'm sorry that is not a valid extension, please try again.

I am working on getting the pcap from the Aastra phones
04-12-2014 12:13 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Lost my configuration trying to fix a static audio problem nestman 0 4,658 06-22-2021 06:33 AM
Last Post: nestman
  T28P LDAP Problem oguzhan 1 8,619 06-10-2020 01:14 PM
Last Post: beldimon
  "On hook" event problem Rafal 6 18,985 03-26-2020 03:35 AM
Last Post: Normfred
  Problem with low-level firmware of telephone T21 E2 protaganist 5 20,481 01-21-2019 11:50 AM
Last Post: protaganist
  T21P dial problem oguzhan 2 11,303 06-20-2018 09:27 AM
Last Post: oguzhan
  Known problem - redial from history Rafal 4 15,200 03-21-2018 06:24 AM
Last Post: Rafal
  Problem with alert BLF in T27P hercross 5 16,142 03-01-2018 05:58 PM
Last Post: Evan_Yealink
  Yealink T21P E2 Communication Problem Windland_Support 1 10,901 08-16-2017 02:44 AM
Last Post: Kevin_Yealink
  SIP T22P Problem liamretrams 2 11,812 06-01-2017 11:22 AM
Last Post: wcolato
  In-Call Call recording button fetoa 10 41,141 03-10-2017 06:44 PM
Last Post: Patrick Hogan

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication