W52P - Forward Off Code

[mkeuter]

Hi,

the Yealink W52P with FW 25.73.0.25 sends the the Forward-off-code (*73) plus the target, in my case *73123, when turning off Call forward. All other Yealink phones I know are sending only *73. Is this a firmware bug?

Update: The related provisioning settings are:

Code:

account.1.always_fwd.on_code = *72
account.1.always_fwd.off_code = *73

[industriecontact]

I can confirm this.

The W52P sends *73+target# while e.g. the T38G only sends *73 (the latter is the correct behavior, I guess ..).

Regards,
Andreas

[Coco_Yealink]

Hello ,

I can reproduce it in my side.
And I will consult with our engineers about this quetion.

Thx

[Coco_Yealink]

Hello ,

Could you please tell me what is the infuence on you if the W52P sends *73+target when turning off Call forward ? As I have got the reply from our engineers, actually the W52P is designed that way.

Thx

[mkeuter]

(12-04-2014 01:51 PM)Yealink_Coco Wrote:  Hello ,

Could you please tell me what is the infuence on you if the W52P sends *73+target when turning off Call forward ? As I have got the reply from our engineers, actually the W52P is designed that way.

Thx

I have to reprogram our PBX and make an exception, as all other Yealink phones send only *73.

It's your choice, how you design your phones, but why don't you design all Yealink phones to behave similar in this point, very strange?

[Coco_Yealink]

OK , I got you .
I will feedback this problem to our product department. And they will evaluate whether to add to our next major version.

Thx

[jeremie]

(12-08-2014 08:54 AM)Yealink_Coco Wrote:  OK , I got you .
I will feedback this problem to our product department. And they will evaluate whether to add to our next major version.

Thx

what about the correction of this bug ?
it's the same with firmware 25.73.0.27

thanks for reply