[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Reliability issues with headset control via EHS
Author Message
Yealink Support Offline
Administrator
*******

Posts: 2,683
Joined: Dec 2012
Reputation: 25
Post: #21
RE: Reliability issues with headset control via EHS
(11-15-2013 02:25 AM)gekran Wrote:  I have updated my EHS36 to the newest firmware 2.16.0.0.
My T46G is using firmware 28.71.188.10.
For approx. 1.5 days my Jabra headset 9470 was working fine. Now the problem is back. After resetting the EHS36 (by disconnecting from the phone and connecting back again) the headset is working fine for approx. 1 hour. After that I cannot answer calls of hangup calls from the headset anymore.

Hi gekran,

Because your firmware is custom, you should ask your distributor for help.
Smile They will help you out.
12-17-2013 03:07 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
braymond Offline
Junior Member
**

Posts: 29
Joined: Nov 2013
Reputation: 0
Post: #22
RE: Reliability issues with headset control via EHS
Yes, I have done that already and haven't heard of issues since then.

Thanks,
Benoit
04-09-2014 07:34 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
anonymous1711612242218
Unregistered

 
Post: #23
RE: Reliability issues with headset control via EHS
(04-08-2013 01:51 PM)rhysb Wrote:  I'm also having this problem with a T26, EHS36 and Jabra 920. I've tried updating the EHS36 firmware and the latest FW on the T26 but no luck. It works initially, but inevitably loses the ability to answer and hang-up.

I have used the Jabra 9120 with the T26 and EHS36 and it has been fine in the past.

The same for me (t26+ehs26+jabra920), do you find any solution? Firmware 3 of ehs36 fix the issue? (I only tried firmware 1 and 2).

Thanks.
04-18-2014 04:42 PM
     Quote this message in a reply
bpen32 Offline
Junior Member
**

Posts: 2
Joined: Oct 2014
Reputation: 0
Post: #24
RE: Reliability issues with headset control via EHS
I have a T48g firmware 35.72.0.30 with and ehs36 firmware 3.16.0. Both of which are the latest firmware available. Ive tried two different headsets 1. CS540 Plantronics and 2. GN Netcom 9350e (Jabra). I have triple checked to make sure that I have the correct cables/plugs used for the specific brand, and here are my results.

Plantronics CS540 - Cannot initiate a call from headset or hang up, period. I cant answer a call by pushing the hook/switch button and then pressing the already lit up Headset button on the T48g... but it already works (if you can call it that) that way without the EHS36.

(Jabra) GN Netcom 9350 - I can initiate and hang up calls, but I have to press the H/S button on the headset 3-7 times to get it to initiate, and 3 times every time to hang up.

This is obviously in no way shape or form reliable or acceptable. What do I need to do to get this major issue resolved? I purchased 5 EHS36's for my new phones in my office and they are basically worthless. I have upgraded them all as per the upgrade instructions, and have tried 3 of them, only to fine that they function the exact same.

Ive also tested on T46G's with the latest firmware on your site, and the 28.72.0.205 for ehs36 upgrading, with the same results as the T48G.
(This post was last modified: 10-14-2014 06:05 AM by bpen32.)
10-14-2014 06:02 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Coco_Yealink Offline
Super Moderator
******

Posts: 113
Joined: Aug 2014
Reputation: 0
Post: #25
RE: Reliability issues with headset control via EHS
Hello bpen32,

Please make sure you connect them as this order: IP phone-EHS36-wireless headset ( ignore the EXP if you not use it )

[Image: attachment.php?aid=1070]

[Image: attachment.php?aid=1071]

1. IP phone+EHS36+CS540 The issue may cause by 3.5mm audio jack. Because the Yealink ones are slightly shorter than standard, and we have feedback this issue to our Product Department. So, could you please notice whether they are good connect ,make sure you have pluged the 3.5mm cable tightly to headset . (This situation appears only for CS540)

2.IP phone+EHS36+9350 May I check with you that the tested type of headset is 9350 or 9350e. Because 9350e has been tested compatible with Yealink IP Phone ,but 9350 hasn't been tested its compatibility.

Thx


Attached File(s) Thumbnail(s)
       
(This post was last modified: 10-14-2014 04:41 PM by Coco_Yealink.)
10-14-2014 04:31 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
bpen32 Offline
Junior Member
**

Posts: 2
Joined: Oct 2014
Reputation: 0
Post: #26
RE: Reliability issues with headset control via EHS
Like I said, I had tripple checked that I have everything connected the way you have you have it depicted above, but I played with the Plantroics and the 3.5mm cable for a few minutes by inserting/removing it many times, and pressing quite hard to make it stay in, but I eventually got it to stay and to work with my T48g.

Unfortunately, there has been zero change with the GN Netcom. Yes it is a 9350e as it states clearly on the label.

Unfortunately, as I went back to my Plantronics I had to mess with the 3.5mm jack for even longer this time to make it work. That's far from plug and play. Now that Ive got it working, I don't even want to nudge the base... must be overly careful. However after getting mine working on my T48g again, I went on to install another Plantronics on a T46g. After about 10 min. of upgrading the phone, and tinkering with every possible connection, I still could not get the Headset to function with the EHS operability. So I have removed it from the planned install location and have brought it back to waste more time testing on another T46g. I don't have time to tinker with 50+ phones that need headsets with EHS operability.

This truly is unacceptable. I love the T series phones themselves, but this EHS36 is a bit a of Joke... especially with the "plug and play", and "easy to use" marketing. I would expect a better product from Yealink. Im doing everything I can to keep my supervisor content with these phones, but he is wanting to move to the Polycom platform because their EHS truly is plug and play. No tinkering, no upgrading, no wasted testing... It just works. (but I hate the phones!) We will moving to our new system of up to 150 phones... the question is will it be Yealink or Polycom. I want Yealink... but its not looking so good. Help me out, please.
10-15-2014 07:03 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Coco_Yealink Offline
Super Moderator
******

Posts: 113
Joined: Aug 2014
Reputation: 0
Post: #27
RE: Reliability issues with headset control via EHS
Hello bpen32 ,

I am very sorry that causing you distress Sad
Thanks for your support, and I am so glad to solve this issue to you.
As for the phone+EHS36+Plantronics CS540. It is a known problem and we have feedback it to our Product Department. I believe that it will solve later.
Is it possible for you to buy some 3.5 mm cables to test if this issue cause from the 3.5 mm cable. (Thank you for your understanding Smile)
The issue happen in phone+EHS36+Jabra 9350e, could you please help to get the syslog(level 6)/ trace from the phone when issue happen ?
export syslog config trace
And please send your information to my mail : coco@yealink.com

Thx
10-15-2014 03:00 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Eric Teisman Offline
Junior Member
**

Posts: 1
Joined: Feb 2015
Reputation: 0
Post: #28
RE: Reliability issues with headset control via EHS
What is the status of this problem, because it still exists !

Setup : 6 x
Yealink SIP-T38G (HW 21.3.4.160.64.0.0 / FW 38.70.1.33)
Jabra EHS36 (HW 48.0.0.0 / FW 3.16.0.0)
Jabra GN9120 Flex NC EHS

2 x SIP-T38G with Jabra GN9125 + GN1000 Remote Handset Lifter : NO problem !

Had to update EHS36 with a T46G otherwise 3.16.0.0 is not available.

Sometimes phone can't be picked up with headset, and sometimes phone is picked up automatically ! (very inconvenient when your not aware). Occurrence seems to be random and can be temporary fixed by unplugging (reboot) the EHS36.
02-25-2015 10:02 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
phlobot Offline
Junior Member
**

Posts: 10
Joined: Oct 2013
Reputation: 0
Post: #29
RE: Reliability issues with headset control via EHS
still not fixed. EHS36 + jabra920 + yealink t26, firmware upgraded a lon time ago but doesn't work now.

Is there a way to see in the firmware if the EHS is detected by the phone?
05-07-2015 04:06 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
anonymous1711612242218
Unregistered

 
Post: #30
RE: Reliability issues with headset control via EHS
I all the time using Jabra Pro 920 with T26/T28 without any issue. I'm using the V73 firmware (last version) and the EHS36 are using release 3 of the firmware. You can check this value on the bottom of the first page into to the web configuration page of the phone.
05-07-2015 04:15 AM
     Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Ringer volume IP Phone w connected WH67/WH63 headset Conrad18 2 725 03-09-2024 12:53 PM
Last Post: Eira Jeremie
  Headset (WH62) adds a Hard Drive on computers MMR1988 0 1,148 05-26-2023 03:37 PM
Last Post: MMR1988
  WH62 on T54w Phone sync 2nd headset SSPhone 2 2,029 05-09-2023 03:33 PM
Last Post: markvdheijden
  wh63 how to adjust ringtone volume in headset? e-neolab 3 5,805 04-17-2023 10:49 AM
Last Post: mowy
Music WH62 Dual headset stereo? obibossard 4 9,197 10-12-2022 01:20 AM
Last Post: Abtzero
  UH38G Headset audio tone changes when microphone is grabbed by some applications lionelpcn 0 1,347 09-05-2022 04:13 AM
Last Post: lionelpcn
  Issues with T58V + EHS40 ingoo 7 18,948 11-25-2021 11:13 PM
Last Post: chrischevy
  Yealink WH66 UC Workstation Dual issues after update Voiptel_Support 3 6,780 11-25-2021 04:36 PM
Last Post: Voiptel_Support
  WH62 constant beeping in headset nickd9999 4 11,299 09-28-2021 07:48 PM
Last Post: nickd9999
  WH62 - Announce call in headset tsukraw 2 10,158 03-23-2021 03:21 AM
Last Post: tsukraw

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication