[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Reliability issues with headset control via EHS
Author Message
andrewm Offline
Junior Member
**

Posts: 10
Joined: Nov 2012
Reputation: 0
Post: #1
Reliability issues with headset control via EHS
Before switching to Yealink, I'd been using 2 wireless headsets with remote handset lifters. These worked flawlessly.

Since switching phones over to T38's, the operation of the headsets via the EHS 36 is not so reliable. It seems to pertain to the call control, rather than the audio.

GN Netcom 9350 + T38: Loses the ability to control the phone from the headset. Rebooting the phone temporarily re-establishes a working system - it won't last more than a day though.

Plantronics Savi + T38: Random phone hangups; one time it was on successive calls, around 10 seconds into the call. Rebooted the headset and it all worked fine again.

In both cases T38,s were running 38.70.0.115. EHS Hardware Version is 48.0.0.0, & EHS Firmware Version us 1.16.0.0

Again, never any control problems using old handset lifter - only since switching to T38's.
03-02-2013 07:28 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Michelth Offline
Junior Member
**

Posts: 17
Joined: Apr 2013
Reputation: 0
Post: #2
RE: Reliability issues with headset control via EHS
I can verify this problem as well with the T28 + EHS36. I just bought Jabra 9330E Wireless headsets and they have the same problem as you described. I will update the firmware of both the T28 and EHS36 to see if this resolves the problem we have.
04-04-2013 05:34 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
rhysb Offline
Junior Member
**

Posts: 1
Joined: Jan 2013
Reputation: 0
Post: #3
RE: Reliability issues with headset control via EHS
I'm also having this problem with a T26, EHS36 and Jabra 920. I've tried updating the EHS36 firmware and the latest FW on the T26 but no luck. It works initially, but inevitably loses the ability to answer and hang-up.

I have used the Jabra 9120 with the T26 and EHS36 and it has been fine in the past.
04-08-2013 01:51 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
promo Offline
Junior Member
**

Posts: 2
Joined: Oct 2013
Reputation: 0
Post: #4
RE: Reliability issues with headset control via EHS
(04-04-2013 05:34 AM)micheltenhove Wrote:  I can verify this problem as well with the T28 + EHS36. I just bought Jabra 9330E Wireless headsets and they have the same problem as you described. I will update the firmware of both the T28 and EHS36 to see if this resolves the problem we have.

Did you have any luck resolving this issue? We have recently switched to the Yealink T26p and purchased a EHS36 to run our jabra GN9330e,..... having issues connecting and disconneting using the headset,.. CHEERS
10-03-2013 12:51 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
nitrousoutlet Offline
Junior Member
**

Posts: 2
Joined: Oct 2013
Reputation: 0
Post: #5
RE: Reliability issues with headset control via EHS
Same problem here with Jabra and Plantronics headsets with the ehs36...
10-05-2013 12:03 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
gekran Offline
Junior Member
**

Posts: 23
Joined: Jul 2013
Reputation: 0
Post: #6
RE: Reliability issues with headset control via EHS
Same problem here with Jabra 9400 and 9120 in combination with Yealink T46G, T28P and T26P. We use the EHS and Phone's with the latest firmware.
(This post was last modified: 10-18-2013 10:34 PM by gekran.)
10-18-2013 10:34 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yealink Support Offline
Administrator
*******

Posts: 2,683
Joined: Dec 2012
Reputation: 25
Post: #7
RE: Reliability issues with headset control via EHS
Hi ALL,

About those issues, please check the connection between EHS36 and wireless headset when the issues happen.
You can refer to the Test wireless headset list compatible with EHS36 in below link.

http://www.yealink.com/Upload/manual/Tes...790608.pdf

I also upload a connection figure between T46G and Jabra 920. T46G_EXP_EHS_Jabra.JPG
And a figure between T46G and Plantronics CS540.
T46G_EXP_EHS_Plantronics.JPG


Attached File(s) Thumbnail(s)
       
10-19-2013 11:26 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
gekran Offline
Junior Member
**

Posts: 23
Joined: Jul 2013
Reputation: 0
Post: #8
RE: Reliability issues with headset control via EHS
Hello Yealink Support,

My jabra's are present in your test list.
The connection I made is according your figure you sent with your reply.

The jabra's are working fine for appr. a day and then I have to reset the EHS by taking out the cable from the phone to the EHS. After connecting the cable back to the EHS every works fine again for appr. a day.
10-19-2013 05:07 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yealink Support Offline
Administrator
*******

Posts: 2,683
Joined: Dec 2012
Reputation: 25
Post: #9
RE: Reliability issues with headset control via EHS
Hi all,

Please make sure that your EHS36 is the latest version.
Below is the guide to upgrade EHS36.
http://www.yealink.com/Upload/document/H...258567.zip
(This post was last modified: 10-25-2013 05:01 PM by Yealink Support.)
10-25-2013 04:39 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yealink Support Offline
Administrator
*******

Posts: 2,683
Joined: Dec 2012
Reputation: 25
Post: #10
RE: Reliability issues with headset control via EHS
(10-19-2013 05:07 PM)gekran Wrote:  Hello Yealink Support,

My jabra's are present in your test list.
The connection I made is according your figure you sent with your reply.

The jabra's are working fine for appr. a day and then I have to reset the EHS by taking out the cable from the phone to the EHS. After connecting the cable back to the EHS every works fine again for appr. a day.

Hi gekran,

Can you tell me the model and version of your phone?
And the connection diagram would be appreciative.
Then we can try to reproduce in yealink office.
10-25-2013 05:18 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Ringer volume IP Phone w connected WH67/WH63 headset Conrad18 2 710 03-09-2024 12:53 PM
Last Post: Eira Jeremie
  Headset (WH62) adds a Hard Drive on computers MMR1988 0 1,144 05-26-2023 03:37 PM
Last Post: MMR1988
  WH62 on T54w Phone sync 2nd headset SSPhone 2 2,025 05-09-2023 03:33 PM
Last Post: markvdheijden
  wh63 how to adjust ringtone volume in headset? e-neolab 3 5,795 04-17-2023 10:49 AM
Last Post: mowy
Music WH62 Dual headset stereo? obibossard 4 9,192 10-12-2022 01:20 AM
Last Post: Abtzero
  UH38G Headset audio tone changes when microphone is grabbed by some applications lionelpcn 0 1,346 09-05-2022 04:13 AM
Last Post: lionelpcn
  Issues with T58V + EHS40 ingoo 7 18,946 11-25-2021 11:13 PM
Last Post: chrischevy
  Yealink WH66 UC Workstation Dual issues after update Voiptel_Support 3 6,776 11-25-2021 04:36 PM
Last Post: Voiptel_Support
  WH62 constant beeping in headset nickd9999 4 11,295 09-28-2021 07:48 PM
Last Post: nickd9999
  WH62 - Announce call in headset tsukraw 2 10,151 03-23-2021 03:21 AM
Last Post: tsukraw

Forum Jump:


User(s) browsing this thread:

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication