[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Message indicator for different extension
Author Message
Jeff Offline
Junior Member
**

Posts: 7
Joined: Oct 2014
Reputation: 0
Post: #1
Message indicator for different extension
Is there a way to have a MWI lamp/button on a phone (in this case Yealink T38g) that will indicate if there is a message for a different extension and ideally be able to access that VM?

For instance: An administrative assistant needs to be able to see if there are any messages for a certain user and listen to those messages from his/her phone with a push of a button.

I am aware that setting up email notifications is a workaround but that is not really what I'm after.

Thanks for any help.

(Using 3CX)
10-27-2014 02:14 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Wilson_Yealink Offline
Administrator
*******

Posts: 171
Joined: Aug 2014
Reputation: 0
Post: #2
RE: Message indicator for different extension
Hi Jeff,

Do you mean your requirement is like below:
You want to have a lamp o the phone keypad can indicate while there are voice mail coming, Then the assistant can press this button to access to the voice mail and play it? Am I correct?
If not, would you please explain it more detailed?
If yes, I suppose the T38 has supported it. Because the content is too many, I am not convenient to attach it for you. So please refer to the user guide of T38, I think it has described the detailed operations about it. You can download it from below link, begin at page 107.

SIP-T38G_User_Guide

thanks
10-27-2014 05:32 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
BrettB Offline
Junior Member
**

Posts: 14
Joined: Jan 2013
Reputation: 0
Post: #3
RE: Message indicator for different extension
(10-27-2014 02:14 AM)Jeff Wrote:  Is there a way to have a MWI lamp/button on a phone (in this case Yealink T38g) that will indicate if there is a message for a different extension and ideally be able to access that VM?

(Using 3CX)

I'm not familiar with 3CX, but with Asterisk and FreePBX, you can use a BLF to monitor a voicemail box and allow access the box by pressing the DSS key. It's works quite well!
10-27-2014 11:49 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Jeff Offline
Junior Member
**

Posts: 7
Joined: Oct 2014
Reputation: 0
Post: #4
RE: Message indicator for different extension
(10-27-2014 11:49 PM)BrettB Wrote:  I'm not familiar with 3CX, but with Asterisk and FreePBX, you can use a BLF to monitor a voicemail box and allow access the box by pressing the DSS key. It's works quite well!

Did you implement that through the Yealink interface? If so could you provide me with instructions?
10-30-2014 01:16 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
BrettB Offline
Junior Member
**

Posts: 14
Joined: Jan 2013
Reputation: 0
Post: #5
RE: Message indicator for different extension
(10-30-2014 01:16 AM)Jeff Wrote:  
(10-27-2014 11:49 PM)BrettB Wrote:  I'm not familiar with 3CX, but with Asterisk and FreePBX, you can use a BLF to monitor a voicemail box and allow access the box by pressing the DSS key. It's works quite well!

Did you implement that through the Yealink interface? If so could you provide me with instructions?

In the Yealink phone, you just configure it as a BLF for "extension" "*98100" (for general voicemail box 100). But it works because our phone system creates the BLF subscription for that "special extension" and dialing that number logs into the voicemail box 100. So your phone system has to support it.
10-30-2014 01:27 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Wilson_Yealink Offline
Administrator
*******

Posts: 171
Joined: Aug 2014
Reputation: 0
Post: #6
RE: Message indicator for different extension
Thanks fo your share, BrettB. I think so that the system has to support it.
11-03-2014 04:30 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  How to use a specific domain in my SIP message instead of server name Marc Olivier 6 12,654 04-20-2023 06:47 PM
Last Post: Simon49236
  T58A as a SIP extension to operate as a SLT behind a Panasonic Select Telecom Systems 0 3,286 08-10-2021 07:55 AM
Last Post: Select Telecom Systems
  Config T19P E2 to display a message while is talking vijareno 0 4,404 02-05-2020 07:37 AM
Last Post: vijareno
  T45 BLF linekey.x.extension syntax for type 13 SCPCJNR 1 7,796 01-15-2020 04:10 PM
Last Post: Yisroel_MongoTEL
  Saving Contact with extension ttagent_77 0 4,325 04-19-2019 09:07 PM
Last Post: anonymous1718628087441
  Yealink T48S displays message "No service" David K L 1 29,820 04-17-2018 03:39 AM
Last Post: anonymous1718628087441
  T46 message button programming for comedian mail Tom831 1 8,291 03-06-2018 05:50 AM
Last Post: Tom831
Question Wrong name displayed when dialing extension DavidA 4 14,996 10-10-2017 08:52 AM
Last Post: Karl_Yealink
  Possible NOT to turn backlight on on XML message GeorgSchwarz 1 7,118 11-19-2015 11:44 PM
Last Post: MRS
  How to set inCall softkey to forward to specific extension? morrism 1 8,367 10-06-2015 07:21 PM
Last Post: keffa

Forum Jump:


User(s) browsing this thread:

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication