[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
T20P firmware from 9.60.0.99
Author Message
Istvan Offline
Junior Member
**

Posts: 4
Joined: Oct 2014
Reputation: 0
Post: #1
Sad T20P firmware from 9.60.0.99
Hi,
I have a T20P phone which has the firmware of 9.61.0.99 and it seems I need to upgrade to the highest version possible, as we are experiencing problems with our voip provider (sonetel.com).
However, the instructions to move to firmware 70 are just too complex.
I have exported our config from the phone, this is config.bin.
But I can't find any form of y00000001.cfg, etc. anywhere, nor mac.cfg.
Also, I don't know what you mean by configuration server, shall I just put the files to any webserver and that's it?
So I am lost. It is just one phone.
Please help.
Thanks
Istvan
(This post was last modified: 10-13-2014 07:32 PM by Istvan.)
10-13-2014 07:32 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yealink_Jim Offline
Super Moderator
******

Posts: 127
Joined: Aug 2014
Reputation: 2
Post: #2
RE: T20P firmware from 9.60.0.99
Hi Istvan,
Usually, we have two methods of firmware upgrade:
1. Upgrade via Web User Interface. (Manually, from the local system for a single phone)
2. Upgrade Firmware via Auto Provisioning. (Automatically, from the provisioning server for a mass of phones)
I suggest that you can upgrade via Web User Interface.

[Image: attachment.php?aid=1076]

Please go to below URL to get more information:

http://forum.yealink.com/forum/showthread.php?tid=1420

Yealink IP phones support using FTP, TFTP, HTTP and HTTPS protocols to download configuration files. If the webserver support to these protocols, You can use one of these protocols for provisioning. You can refer to below Auto Provisioning guide for more information:

http://www.yealink.com/Upload/T2X/2014.3...V72_30.pdf

Hope this helps!


Attached File(s) Thumbnail(s)
   
10-15-2014 09:57 AM
Find all posts by this user    like1    dislike0 Quote this message in a reply
Istvan Offline
Junior Member
**

Posts: 4
Joined: Oct 2014
Reputation: 0
Post: #3
RE: T20P firmware from 9.60.0.99
Thanks, does this mean that if I update using the web interface, there is no need to convert any settings files and mac files and the like?
(This post was last modified: 10-17-2014 01:41 AM by Istvan.)
10-17-2014 01:40 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yealink_Jim Offline
Super Moderator
******

Posts: 127
Joined: Aug 2014
Reputation: 2
Post: #4
RE: T20P firmware from 9.60.0.99
(10-17-2014 01:40 AM)Istvan Wrote:  Thanks, does this mean that if I update using the web interface, there is no need to convert any settings files and mac files and the like?

You need to make sure that the correct configuration parameters
10-20-2014 03:22 PM
Find all posts by this user    like0    dislike1 Quote this message in a reply
Istvan Offline
Junior Member
**

Posts: 4
Joined: Oct 2014
Reputation: 0
Post: #5
RE: T20P firmware from 9.60.0.99
(10-20-2014 03:22 PM)Yealink_Jim Wrote:  
(10-17-2014 01:40 AM)Istvan Wrote:  Thanks, does this mean that if I update using the web interface, there is no need to convert any settings files and mac files and the like?

You need to make sure that the correct configuration parameters

Please check you message, it seems to be incomplete.
10-23-2014 02:45 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Istvan Offline
Junior Member
**

Posts: 4
Joined: Oct 2014
Reputation: 0
Post: #6
RE: T20P firmware from 9.60.0.99
Please complete your response of 10-20-2014 10:22 AM, Yealink_Jim, until that I cannot proceed. Thanks.
11-04-2014 08:50 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yealink_Jim Offline
Super Moderator
******

Posts: 127
Joined: Aug 2014
Reputation: 2
Post: #7
RE: T20P firmware from 9.60.0.99
Hi Istvan,
Yes, if you upgrade using the web interface, you don't need to convert any settings files and mac files and the like.
11-05-2014 09:13 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Mmadera Offline
Junior Member
**

Posts: 4
Joined: Jan 2016
Reputation: 1
Post: #8
RE: T20P firmware from 9.60.0.99
to firmware upgrade its simply:

downlaod the ne w firmware http://support.yealink.com/documentFront...19#frnotes
in the phone web page (you must know wich ip actually use, just press menu and ok in the phone and it shows)
go to configure, upgrade, select the file donwloaded previously and wait to finish

hope this helps
01-12-2016 11:03 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  T21P E2 firmware upgrade janp 0 4,392 01-27-2024 02:43 AM
Last Post: janp
  Firmware upgrade fails on T21P E2 p.pasquino@technology4you.it 0 6,608 11-02-2021 04:42 PM
Last Post: p.pasquino@technology4you.it
  T21P_E2 firmware 84.0.125 slow with VLAN GwenH 3 13,886 11-03-2020 11:01 PM
Last Post: complex1
  T26P Can not upgrade firmware martien.poels@bank2loyalty.com 2 10,792 09-21-2020 05:16 PM
Last Post: complex1
Lightbulb Yealink T28P Firmware Upgrade Fails Michelth 11 59,368 06-27-2020 10:13 AM
Last Post: complex1
  default username/password not working after firmware upgrade tfrohling 3 39,943 02-15-2020 01:30 PM
Last Post: khalidnisar
  T22 and firmware upgrade saleh 2 19,942 08-16-2019 01:15 PM
Last Post: justingoldberg
  How to change voice when busy, waiting and other.. T20P marin 0 4,703 04-11-2019 12:53 PM
Last Post: marin
  Problem with low-level firmware of telephone T21 E2 protaganist 5 20,447 01-21-2019 11:50 AM
Last Post: protaganist
  T20P Issues uploading VPN configuration mikeymike20 1 7,727 06-13-2018 07:24 AM
Last Post: Michael_Yealink

Forum Jump:


User(s) browsing this thread:

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication