New Forum system requires email address which you used to apply for your account to replace your original username. Password stays the same.Please see this post for more details
http://forum.yealink.com/forum/showthread.php?tid=40344

Yealink Test Club has been officially launched. Please visit post below to get detail information. Come and join us!
http://forum.yealink.com/forum/announcements.php?aid=18

We just had the YMCS online and we are also working on the features plan on the future versions, in this regard we are need to hear your voice about the YMCS.
Please visit : http://forum.yealink.com/forum/showthread.php?tid=42322


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
T28 call waiting notify
Author Message
rebelscum Offline
Junior Member
**

Posts: 8
Joined: Sep 2014
Reputation: 0
Post: #1
T28 call waiting notify
Hi, our Yealink T28 phones have call waiting enabled, with call waiting tone enabled too. The incoming call tone & display message both work fine for the person receiving the call.
However, the person making the call (internally, from one extension to another) receives no notification that the person being dialed is on another call - instead it just rings and rings.
Is there an audible or visual way of notifying the caller that the recipient is busy but aware of the incoming call?
Thanks,
09-30-2014 11:27 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Wilson_Yealink Offline
Administrator
*******

Posts: 171
Joined: Aug 2014
Reputation: 0
Post: #2
RE: T28 call waiting notify
Hi rebelscum,

Sorry for I can't understand your meaning clearly. Do you mean you scenario is like below?
1. A enabled the call waiting and call waiting tone.
2. B call A, A answer it.
3. C call A, A just rings but no notification on the LCD screen.
If not, could you please describe your operations and issue more detailed?
If yes, what is the display on screen when you make second call to A?

thanks
10-10-2014 08:12 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
MiKeDaDoC Offline
Junior Member
**

Posts: 6
Joined: Apr 2015
Reputation: 0
Post: #3
RE: T28 call waiting notify
Hello,

I got exactly the same question. The Scenario is like this:

(T46G and 3CX PBX)

1. A enabled the call waiting and call waiting tone.
2. B call A, A answer it.
3. C call A, A's got the notification on the screen that there is a second call, so far, so good
4. C can't know that A is in a call, for C got a normal ringing and no Information that it's call is the second call on A

Is there any way to inform C in the T46G display about being the second call on A?

Let me know if I have to make it any clearer.

THX
04-25-2015 05:24 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
keepittidy Offline
Junior Member
**

Posts: 2
Joined: Oct 2015
Reputation: 0
Post: #4
RE: T28 call waiting notify
I have the same issue as MiKeDaDoC, was this issue ever resolved??

Thanks

Richard
10-19-2015 09:17 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
James_Yealink Offline
Administrator
*******

Posts: 1,159
Joined: Aug 2014
Reputation: 8
Post: #5
RE: T28 call waiting notify
For internal calls(extension to extension), BLF can be used to monitor the status of callee.

For external calls, there is no a good method to know the status of other side. The oehter side should tell the status firstly.
10-20-2015 01:30 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
keepittidy Offline
Junior Member
**

Posts: 2
Joined: Oct 2015
Reputation: 0
Post: #6
RE: T28 call waiting notify
(10-20-2015 01:30 PM)Yealink_James Wrote:  For internal calls(extension to extension), BLF can be used to monitor the status of callee.

For external calls, there is no a good method to know the status of other side. The ohter side should tell the status firstly.

Thanks James,

My situation is for internal to internal (extension to extension) but i don't think BLF will work for my situation. What i need is for example:

a) Extension 100 calls extension 200
b) 200 is on a call already
c) I would like an indication that ext 200 is on the call rather than it just ringing and me assuming they are not in.

I know i could setup BLF between the 2 extensions but i would like this to work if i called ANY extension in the building, so too many to setup BLF.

I expected something like a different ringtone in my ear or a message on screen to say i am "call waiting" and the other person is talking to someone already.

Thanks again

Richard
10-20-2015 03:38 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  SIP-T27G no Refresh Display BLF Monitoring When Receiving subsequence Notify cleviton 1 893 05-03-2019 09:56 AM
Last Post: Kamik
  How to change voice when busy, waiting and other.. T20P marin 0 408 04-11-2019 12:53 PM
Last Post: marin
  Call forwarding with SIP devices Yealink and Cisco Call Manager CUCM joao.schlemm 7 7,623 08-03-2018 08:03 PM
Last Post: MarkLReed
Photo Yealink T21P E2 displays VIA and FROM headers on incoming call DmitryTsyganov 1 1,327 07-12-2018 07:28 PM
Last Post: johnkiniston
  T21P-E2 sends a CANCEL to put a call in hold Diego Juan 0 1,032 03-23-2018 02:52 PM
Last Post: Diego Juan
  Call Queue not working with the Grandstream UCM6202 ttran 8 6,486 03-04-2018 06:42 PM
Last Post: Adnanka
  T29G DSSKey functionality alternative number call AresK 4 2,319 12-13-2017 06:56 AM
Last Post: Evan_Yealink
  When I call outside, there's no call waiting tone highlander 3 2,323 11-15-2017 04:04 PM
Last Post: highlander
  Call Forward on T21P E2 not working gradash 8 6,978 05-23-2017 09:44 PM
Last Post: jolouis
  Call Queue not working with the Grandstream UCM6202 ttran 0 1,871 05-04-2017 05:48 PM
Last Post: ttran

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication