[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
T21P & Panasonic
Author Message
hcsoft Offline
Junior Member
**

Posts: 1
Joined: Sep 2014
Reputation: 0
Post: #1
T21P & Panasonic
hi
I have several extensions with yealink T21P and PBX KX-NS1000 .

question 1
- I can not send commands *7102ext# ( command panasonic sample ) response temporarily unavailable.

question 2
- Forward & DND yealink does not work, In menu, Always Forward "ON",
target ext "122" (sample) , call 122 from another ext does not work.

my english is not very good .

greetings .
09-25-2014 03:53 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Coco_Yealink Offline
Super Moderator
******

Posts: 113
Joined: Aug 2014
Reputation: 0
Post: #2
RE: T21P & Panasonic
Hi hcsoft,

Sorry that I cannot got the question from you.
Could you please check whether my understanding is right?
Question 1 : You press the *7102ext# in T21, and T21 got the reply: temporarily unavailable ,right?
If right ,please tell me the function of *7102ext# do you want to enable?
If not ,then please tell me the real scene.
Question 2: You have enable the always forward ,and set the target ext 122, then sorry that I cannot get the word
" call 122 from another ext does not work."
Sorry for my vague understanding.And please kindly describe for me again.

Thx
09-26-2014 08:43 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Oxipira Offline
Junior Member
**

Posts: 4
Joined: Jan 2015
Reputation: 0
Post: #3
RE: T21P & Panasonic
Hi, i've experiencing the same issue:

- Forward & DND yealink does not work, In menu, Always Forward "ON",
target ext "122" (sample) , call 122 from another ext does not work.

Using the example above, I set up Always Forward = ON and Target i put the extension number = 122.

when I call 122 form another extension, i got the busy signal.

My PABX is a Panasonic NCP-1000. What I have todo to solve this problem ? Thanks in advance,

Oxipira
01-06-2015 01:19 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yealink_Peter Offline
Super Moderator
******

Posts: 141
Joined: Nov 2014
Reputation: 2
Post: #4
RE: T21P & Panasonic
Hello Oxipira,

Thanks for your information.
Supposed Phone A enabled Always Forward, extension 122 located on Phone B
When phone C called A, it will be forward to phone B, extension 122 ring up
If you call to phone B (122), it should ring up normally.
But, if 122 is another line set on Phone A, when you call 122, it will can't get through.
I'm not idea if I got what you mean, please correct me if I misunderstood.

Thanks.

Regards,
Peter
01-06-2015 06:10 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Oxipira Offline
Junior Member
**

Posts: 4
Joined: Jan 2015
Reputation: 0
Post: #5
RE: T21P & Panasonic
(01-06-2015 06:10 PM)Yealink_Peter Wrote:  Hello Oxipira,

Thanks for your information.
Supposed Phone A enabled Always Forward, extension 122 located on Phone B
When phone C called A, it will be forward to phone B, extension 122 ring up
If you call to phone B (122), it should ring up normally.
But, if 122 is another line set on Phone A, when you call 122, it will can't get through.
I'm not idea if I got what you mean, please correct me if I misunderstood.

Thanks.

Regards,
Peter

Hello Peter, thanks for your attention.

I have just configured one extension on my T20P. I have three extensions: 120, 121 and 122 on my PABX.

On my extension 121 I set it up to Always Forward and the target is the extension 122.

When I try to call to extension 121 using my extension 120, I hear the busy tone and either extensions (121 and 122) don't ring up (nothing happens).

Thanks.
01-07-2015 02:16 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yealink_Peter Offline
Super Moderator
******

Posts: 141
Joined: Nov 2014
Reputation: 2
Post: #6
RE: T21P & Panasonic
Hello Oxipira,

Call forward is local to the phone, and may be overridden by the server settings. Please check the forward rule in your PABX first.
If you can't solve this problem, please take a PCAP trace to me follow below steps, so that we can know is phone side or PABX side forwarded this call:
1.Go to setting-> Configuration.
2.Start pcap trace
3.Place a call from extension 120 to 121
4.Go to setting-> Configuration and export pcap trace to us.

Thanks.

Regards,
Peter
01-07-2015 02:02 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Oxipira Offline
Junior Member
**

Posts: 4
Joined: Jan 2015
Reputation: 0
Post: #7
RE: T21P & Panasonic
(01-07-2015 02:02 PM)Yealink_Peter Wrote:  Hello Oxipira,

Call forward is local to the phone, and may be overridden by the server settings. Please check the forward rule in your PABX first.
If you can't solve this problem, please take a PCAP trace to me follow below steps, so that we can know is phone side or PABX side forwarded this call:
1.Go to setting-> Configuration.
2.Start pcap trace
3.Place a call from extension 120 to 121
4.Go to setting-> Configuration and export pcap trace to us.

Thanks.

Regards,
Peter

Hi Peter, here is the pcap file. The target extension is 988.

Thanks,

Oxipira


Attached File(s)
.pcap  9.73.0.40_15_11_36.pcap (Size: 161.99 KB / Downloads: 5)
01-08-2015 07:15 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yealink_Peter Offline
Super Moderator
******

Posts: 141
Joined: Nov 2014
Reputation: 2
Post: #8
RE: T21P & Panasonic
Hello Oxipira,

Thanks for your information. I have read your pcap file but it seems it only contains the extension 977 phone's trace. Could you please take traces on each of the other two phones? so we can know the whole process message.
What's more, have you confirmed from your phone server side to make sure it does not set to be transfered to another unknown extension?

Thanks.

Regards,
Peter
01-14-2015 05:21 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Oxipira Offline
Junior Member
**

Posts: 4
Joined: Jan 2015
Reputation: 0
Post: #9
RE: T21P & Panasonic
Hi Peter, sorry about this long delay. My Panasonic NCP1000 (Phone Server) config. is blank on that extensions. I have just one yealink on the middle of this process. The 977 is an analogic extension (source), the 989 extension (Yealink - the 1st target) redirecting to 976 extension (final target - analogic).
I don't know why the pcap file has stored only the 977 extension...maybe because the yealink couldn't accomplish its task. What do you think ? Thanks.
01-20-2015 09:03 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
tmartin87 Offline
Junior Member
**

Posts: 1
Joined: Jul 2015
Reputation: 0
Post: #10
RE: T21P & Panasonic
Hi,

I am a Panasonic dealer and would like to use Yealink phones on the Panasonic NS platforms. I haven't been able to get MWI (message waiting indicators) for a new voicemail message to work correctly on the Yealink phones with the NS-1000. Any ideas?

Thanks in advance
07-08-2015 04:19 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  T21P E2 - Custom Ringtone Darleen 3 1,648 07-26-2022 10:40 PM
Last Post: complex1
  T21P Low headset volume rmatuda 14 37,262 11-02-2021 08:39 PM
Last Post: overlay
  Firmware upgrade fails on T21P E2 p.pasquino@technology4you.it 0 2,659 11-02-2021 04:42 PM
Last Post: p.pasquino@technology4you.it
  T21P Stuck on "Initializing" - Recovery Mode Fails` YCMJamie 5 8,744 08-24-2021 07:04 PM
Last Post: YCMJamie
  T21P E2 default Programmable Key label in V84 erictam 6 13,156 10-28-2020 10:32 PM
Last Post: GwenH
  Recovery files T21P agalindo 1 7,193 06-16-2020 01:49 PM
Last Post: complex1
  T21P Register Failed agatospk 6 13,912 01-31-2020 06:08 AM
Last Post: agatospk
  T21P recover files davidpablo 8 24,554 01-30-2020 02:02 PM
Last Post: Yisroel_MongoTEL
  Low volume yealink T21p miesvictor 2 6,644 12-05-2019 11:35 PM
Last Post: miesvictor
  T21P E2: Missed calls: How to show caller's number? quazgar 1 6,527 12-05-2019 07:19 AM
Last Post: Walter_Yealink

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication