Log in

conradwu · 09-24-2014 06:50 PM

I thought the phone (I have both T21P and T28P) was not capable of unicode characters, but today I visited someone else's office and it is certainly a T28P except the name being the carrier instead of Yealink.

It does Chinese characters on the screen, have I missed something in the settings or using the wrong firmware?

My phonebook is unicode but shows "????" on the phone screen.

Please advise!

**Yealink_Jim** · 09-25-2014 04:31 PM

Hi Conradwu,
Would you please tell me what is the firmware version of your IP phone and what language do you want to display about the phonebook.
Given below is latest firmware version for T21, you can upgrade to the version to check if it can solve this issue.

http://www.yealink.com/Upload/UCOne/2014...2.0.75.zip

Hope this helps!

conradwu · 09-25-2014 08:03 PM

I am using T21P and T28P and wish to have Chinese (Traditional) shown on screen. Thanks for the link for T21, can I also have the firmware for T28?

For T28, I used the beta release, it now has Chinese web interface but not phone screen display.

I will try to flash it over the weekend once I have the T28 as well, thank you!

(09-25-2014 04:31 PM)Yealink_Jim Wrote: Hi Conradwu,
Would you please tell me what is the firmware version of your IP phone and what language do you want to display about the phonebook.
Given below is latest firmware version for T21, you can upgrade to the version to check if it can solve this issue.

http://www.yealink.com/Upload/UCOne/2014...2.0.75.zip

Hope this helps!

conradwu · 09-26-2014 12:55 PM

I have just tested the link you sent me and yes it works with Chinese characters now, thanks!

However I tried a few ROMs for T28P but it still shows "???" only, even though it has Chinese web UI now.

The ROMs I have tried so far:
2.73.0.15 beta
2.72.0.80
2.72.0.75

Hope you can help, thank you.

(09-25-2014 04:31 PM)Yealink_Jim Wrote: Hi Conradwu,
Would you please tell me what is the firmware version of your IP phone and what language do you want to display about the phonebook.
Given below is latest firmware version for T21, you can upgrade to the version to check if it can solve this issue.

http://www.yealink.com/Upload/UCOne/2014...2.0.75.zip

Hope this helps!

**Yealink_Jim** · 10-10-2014 04:23 PM

Hi，
Please go to below to get the firmware version:

ftp://Jim:v2R88xcL@ftp.yealink.com/ftp/2.72.0.33.rom

Hope this helps!

Possibly Related Threads...
Thread:		Author	Replies:	Views:	Last Post
	Which Yealink USB headset complies with T2xG/T2xP series ?	oliv	2	3,946	02-08-2023 09:30 PM Last Post: oliv
	SIP-T27G no Refresh Display BLF Monitoring When Receiving subsequence Notify	cleviton	1	7,809	05-03-2019 09:56 AM Last Post: Kamik
	Yealinks T2xP do not respond to INVITE requests	gtsionos	6	16,464	01-30-2019 09:58 PM Last Post: jolouis
	Display Outgoing number instead of CallerID	Trang	2	9,570	06-01-2017 07:46 PM Last Post: Trang
	T29G + EXP20 dont display similar output	chidado	0	5,866	02-07-2017 11:32 PM Last Post: chidado
	DIsplay shows "anonymous"	Darren.Jordaan	5	19,320	10-04-2016 05:10 PM Last Post: crossby
	T2XP Series Phones Experiencing Buzzing/Humming	onellpadmin	10	38,155	09-29-2016 05:52 PM Last Post: sokiu
	T22P Display cycles every 10 seconds	Tgarius	1	7,532	10-24-2015 06:17 AM Last Post: Yealink_Michael
	T2xP looses registration when call timeout	braymond	11	35,875	09-29-2015 08:53 AM Last Post: jackal
	Display Number incoming caller dialed and caller ID	jchinmd2000	1	7,649	06-16-2015 12:01 AM Last Post: cadillackid

Threaded Mode \| Linear Mode T2xP unicode (Chinese) display?
Author	Message