[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
PortaOne
Author Message
marcogp Offline
Junior Member
**

Posts: 1
Joined: Feb 2013
Reputation: 0
Post: #1
PortaOne
How can I configure phones from PortaOne system? We have a provisioning tool. However from the documentation is unclear the steps that we have to do in our offices and the steps that the users should do after receiving the phones.

Thank you
M.
02-21-2013 03:27 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Kostyantyn Offline
Junior Member
**

Posts: 1
Joined: Feb 2013
Reputation: 0
Post: #2
RE: PortaOne
Hello!

(02-21-2013 03:27 PM)marcogp Wrote:  How can I configure phones from PortaOne system? We have a provisioning tool. However from the documentation is unclear the steps that we have to do in our offices and the steps that the users should do after receiving the phones.

The step by step instructions of Auto-provisioning of IP Phones are available in the Unified PortaSwitch Handbook Collection:
http://portaone.com/resources/documentat...phones.htm

General configuration, IP phone inventory and Assigning a phone number to the IP phone settings are performed by an administrator of PortaSwitch.
IP phone settings can be performed by the administrator of PortaSwitch, or by manufacturer (if there is a big batch of IP phones and he is ready to perform these settings directly on the factory), or by an end user.
Testing settings can be performed by the admin or the end user.

Peculiarities of IP phone device configuration for Yealink are also available in this document.
02-28-2013 04:20 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
lauraespinosa Offline
Junior Member
**

Posts: 1
Joined: Aug 2013
Reputation: 0
Post: #3
RE: PortaOne
Sorry to hear that the implementation process is unclear. Unfortunately we've received poor feedback on PortaOne from some of our customers as well. In fact, one company even split up over PortaOne! If you're interested in that story it's on our blog.

If you're interested in changing to a different system, Bicom Systems would be happy to speak with you and walk you through the entire installation and configuration process. We pride ourselves on superior customer service. We have a comparison table of PortaOne and our services that may interest you: http://blog.bicomsystems.com/portaone-vs-bicom
08-06-2013 12:47 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication