[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
2 Beeps before busy-signal
Author Message
ike Offline
Junior Member
**

Posts: 11
Joined: Jan 2013
Reputation: 0
Post: #1
Question 2 Beeps before busy-signal
Hello,

i have set "Call Waiting" = Disabled and "Return Code When Refuse" = 486 (Busy).
When someone calls me, he becomes two beeps and then the busy signal, when i have an other telephone-call.
The caller must think, that i am available and then after two rings i press a refuse-button.
Here in germany this behaviour is not gracefully.

Is it possible, to configure the T26P-Phone, that the caller receive immediately the busy-signal (and not after two rings)?
The Phone is conneted to the VOIP-Router "AVM Fritz-Box 7270".

(Sorry, not native english-speaker)

Thank you!

Bernd
02-19-2013 04:17 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yealink Support Offline
Administrator
*******

Posts: 2,683
Joined: Dec 2012
Reputation: 25
Post: #2
RE: 2 Beeps before busy-signal
HI Bernd

The two beeps it's told to the caller that he had sent the call successful to the callee. If we remove the two beeps ,the caller have no idea whether he have contected to the callee.

Best regards
02-26-2013 06:18 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
ike Offline
Junior Member
**

Posts: 11
Joined: Jan 2013
Reputation: 0
Post: #3
RE: 2 Beeps before busy-signal
(02-26-2013 06:18 PM)Yealink Support Wrote:  The two beeps it's told to the caller that he had sent the call successful to the callee. If we remove the two beeps ,the caller have no idea whether he have contected to the callee.

Hi, thank you for your response.
This is in Germany not the standard behaviour for telephones (i doesn't know a person who have a telephone with the Yealink-behaviour).
When the caller receive first a normal tone (he must be think "hey, he is available" Smile ) and after the busy signal the caller must be think "he want not to speak with ME" Angry
Here in Germany this behaviour is impolite.

Is it possible to have this feature user-configurable in the next firmware (e.g. "beeps before busy")?

Best regards

Bernd
02-26-2013 06:54 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yealink Support Offline
Administrator
*******

Posts: 2,683
Joined: Dec 2012
Reputation: 25
Post: #4
RE: 2 Beeps before busy-signal
HI Bernd

Yes that isn't impolite to the caller .
The reason why the caller will hear two beeps before the busy signal is when the caller call you , you will send a "486 busy here" sip info to the server ,then server send caller a "180 ringing" (to tell the caller that he had sent the call successful to the callee ) .So when the caller get the "180 ringring " , the phone which is belong to caller will make a Ring Back tone to caller .

If it is possible , when the server receive "486 busy here" will forward it to the caller immediately instead of "180 ringing" . so this problem will be solved .

reference:

Code:
| 10.2.10.151  (caller)                                     | 10.2.10.255 (callee)                    
||                            | 10.2.1.199(server)                          
|5.916    |         INVITE SDP
|         |(5062)   ------------------>  (5060)                      |
|5.918    |         100 Trying|                                      |
|         |(5062)   <------------------  (5060)                      |
|5.920    |                   |         INVITE SDP
|         |                   |(5060)   ------------------>  (5062)  |
|5.934    |                   |         100 Trying                   |
|         |                   |(5060)   <------------------  (5062)  |
|6.123    |                   |         486 Busy Here                |
|         |                   |(5060)   <------------------  (5062)  |
|6.126    |                   |         ACK                          |
|         |                   |(5060)   ------------------>  (5062)  |
|6.127    |         486 Busy Here                                    |
|         |(5062)   <------------------  (5060)                      |
|6.278    |         ACK       |                                      |
|         |(5062)   ------------------>  (5060)                      |

(02-26-2013 06:54 PM)ike Wrote:  
(02-26-2013 06:18 PM)Yealink Support Wrote:  The two beeps it's told to the caller that he had sent the call successful to the callee. If we remove the two beeps ,the caller have no idea whether he have contected to the callee.

Best regards Smile


Hi, thank you for your response.
This is in Germany not the standard behaviour for telephones (i doesn't know a person who have a telephone with the Yealink-behaviour).
When the caller receive first a normal tone (he must be think "hey, he is available" Smile ) and after the busy signal the caller must be think "he want not to speak with ME" Angry
Here in Germany this behaviour is impolite.

Is it possible to have this feature user-configurable in the next firmware (e.g. "beeps before busy")?

Best regards

Bernd
02-28-2013 08:42 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
Lightbulb Busy Lamp Field Emil01 0 3,401 09-27-2019 09:51 AM
Last Post: Emil01
  Ring-beep on internal busy calls lupacexi 1 7,618 12-11-2017 02:47 AM
Last Post: Evan_Yealink
  Ring-beep on internal busy calls xptpa2020 2 9,214 03-10-2017 07:47 AM
Last Post: Klaus_Yealink
  T48G - busy tone for a second incomming call Dirk 8 19,792 01-17-2017 05:36 PM
Last Post: complex1
  Enable Periodic Voicemail beeps Atechhito 3 11,729 05-23-2016 11:56 AM
Last Post: Darrin Higginson
  Answer second call or make a call when busy spapakons 9 43,626 02-24-2015 01:11 AM
Last Post: cloudneto
  W52P When line 1 is busy it should go to next line 2 Yss 3 10,126 11-14-2014 03:47 PM
Last Post: Coco_Yealink
  call forwarding on busy line hilkiah 1 7,984 10-16-2013 05:21 PM
Last Post: Yealink Support

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication