[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
BLF(Broadworks) Icons Issue on T48G
Author Message
hari908 Offline
Junior Member
**

Posts: 6
Joined: Sep 2014
Reputation: 0
Post: #1
BLF(Broadworks) Icons Issue on T48G
I have created the BLF URI in broadsoft r18/r19/r20 server as hari123

From phone's web UI
Go to page
Account ->Advanced
Set BLF List URI to hari123

I am able to see the BLF lines on the phone.
But when i am placing calls to BLF lines from other phone, the BLF line icon showing ringing even after the answering the call. This remains in ringing state even after ending the call on BLF line. The icons get cleared after leaving the phone for 10-15min.

Is there any other configuration that needs to be done?
The same works perfectly on Polycom phones.

Thanks in advance
(This post was last modified: 09-17-2014 02:03 PM by hari908.)
09-08-2014 11:50 PM
Find all posts by this user    like1    dislike0 Quote this message in a reply
James_Yealink Offline
Administrator
*******

Posts: 1,159
Joined: Aug 2014
Reputation: 8
Post: #2
RE: BLF(Broadworks) Icons Issue on T48G
Hi Hari908,

What's your phone firmware?
The BLF status depends on the NOTIFY message sent by sip server. If phone receive a NOTIFY message which tell phone change to BLF status to idle, it shouldn't remain in ringing state.
Is the T48G in a same network to Polycom phones?

If possible can you get a pcap file and level 6 syslog in the process? We will check whether phone receive a Notify message when ending a call.

For how to get a pcap file and syslog:
http://forum.yealink.com/forum/showthread.php?tid=1319

Regards,
James
09-10-2014 04:54 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
hari908 Offline
Junior Member
**

Posts: 6
Joined: Sep 2014
Reputation: 0
Post: #3
RE: BLF(Broadworks) Icons Issue on T48G
Please find my answers inline. Attached the syslog, pcap and config in yealink_TP48G.zip

Scenario Tested:
1. Yealink(1647) monitors BLF Line 1648.
2. 1649 calls 1648. 1648 answers and establishes call with 1649.
3. After few seconds, 1649 ends the call.

(09-10-2014 04:54 PM)Yealink_James Wrote:  Hi Hari908,

What's your phone firmware?
>> 35.72.193.10

The BLF status depends on the NOTIFY message sent by sip server. If phone receive a NOTIFY message which tell phone change to BLF status to idle, it shouldn't remain in ringing state.
Is the T48G in a same network to Polycom phones?
>>> Both are connected to the same POE switch.

If possible can you get a pcap file and level 6 syslog in the process? We will check whether phone receive a Notify message when ending a call.

>> Attached the syslog, pcap and config in yealink_TP48G.zip

For how to get a pcap file and syslog:
http://forum.yealink.com/forum/showthread.php?tid=1319

Regards,
James


Attached File(s)
.zip  yealink_TP48G.zip (Size: 105.77 KB / Downloads: 4)
(This post was last modified: 09-16-2014 05:11 PM by hari908.)
09-16-2014 04:00 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
James_Yealink Offline
Administrator
*******

Posts: 1,159
Joined: Aug 2014
Reputation: 8
Post: #4
RE: BLF(Broadworks) Icons Issue on T48G
Thanks for these information, I have transferred them to our R&D and they will have an analysis.

May I confirm these two points:

1.Have you created a device type of T48 and created a device profile for this T48 based on the T48 type?
2.How many phones are experience the problem now?


Regards,
James
09-16-2014 05:24 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
hari908 Offline
Junior Member
**

Posts: 6
Joined: Sep 2014
Reputation: 0
Post: #5
RE: BLF(Broadworks) Icons Issue on T48G
Please find my answers inline.

(09-16-2014 05:24 PM)Yealink_James Wrote:  Thanks for these information, I have transferred them to our R&D and they will have an analysis.


May I confirm these two points:

1.Have you created a device type of T48 and created a device profile for this T48 based on the T48 type?
>> Yes i have created T42G device type. T48G CPE kit downloaded from your website is throwing error when imported. Attached is the screenshot(CPE_KIT_Import_Error.png).

2.How many phones are experience the problem now?
Currently i have 2 T48G phones and both are giving the same problem


Regards,
James


Attached File(s) Thumbnail(s)
   
(This post was last modified: 09-16-2014 08:41 PM by hari908.)
09-16-2014 08:40 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
hari908 Offline
Junior Member
**

Posts: 6
Joined: Sep 2014
Reputation: 0
Post: #6
RE: BLF(Broadworks) Icons Issue on T48G
James,

Request you to provide update on this.


(09-16-2014 08:40 PM)hari908 Wrote:  Please find my answers inline.

(09-16-2014 05:24 PM)Yealink_James Wrote:  Thanks for these information, I have transferred them to our R&D and they will have an analysis.


May I confirm these two points:

1.Have you created a device type of T48 and created a device profile for this T48 based on the T48 type?
>> Yes i have created T42G device type. T48G CPE kit downloaded from your website is throwing error when imported. Attached is the screenshot(CPE_KIT_Import_Error.png).

2.How many phones are experience the problem now?
Currently i have 2 T48G phones and both are giving the same problem


Regards,
James
09-22-2014 02:58 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
James_Yealink Offline
Administrator
*******

Posts: 1,159
Joined: Aug 2014
Reputation: 8
Post: #7
RE: BLF(Broadworks) Icons Issue on T48G
Hi Hari,

According to our R&D, it seems that the problem is related to the port Broadsoft send.
Can you please try adding this parameter by autoprovision and check again.

sip.send_response_by_request=1

Autoprovision guide:
http://www.yealink.com/Upload/T4X/201412..._V72_2.pdf

Regards,
James
09-29-2014 01:51 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
James_Yealink Offline
Administrator
*******

Posts: 1,159
Joined: Aug 2014
Reputation: 8
Post: #8
RE: BLF(Broadworks) Icons Issue on T48G
If the problem is not solved, please send a new pcap/syslog/config.bin.

Thanks
09-29-2014 01:53 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
James_Yealink Offline
Administrator
*******

Posts: 1,159
Joined: Aug 2014
Reputation: 8
Post: #9
RE: BLF(Broadworks) Icons Issue on T48G
Sorry Hari,
I send a wrong parameter, the value should be 0.

sip.send_response_by_request= 0

Please try this autoprovision parameter.

Regards,
James
09-30-2014 01:30 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
hari908 Offline
Junior Member
**

Posts: 6
Joined: Sep 2014
Reputation: 0
Post: #10
RE: BLF(Broadworks) Icons Issue on T48G
James,

I am facing the same problem even after setting sip.send_response_by_request= 0.

Attached are the pcap, config and logs as attachment Logs_6th_Oct.zip.

(09-30-2014 01:30 PM)Yealink_James Wrote:  Sorry Hari,
I send a wrong parameter, the value should be 0.

sip.send_response_by_request= 0

Please try this autoprovision parameter.

Regards,
James


Attached File(s)
.zip  Logs_6th_Oct.zip (Size: 107.97 KB / Downloads: 2)
10-06-2014 05:14 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Yealink T27P -Incoming call issue rsarceno 0 1,243 01-25-2023 08:54 AM
Last Post: rsarceno
Question 3CX / Yealink passthrough VLAN issue (when phone is rebooted) maindriver 4 11,582 03-24-2022 10:25 PM
Last Post: maindriver
  Best way to manage line keys on multiple T48G/S sani390 0 3,419 07-01-2021 02:06 PM
Last Post: sani390
  LDAPS Issue with Lets Encrypt Certificates rcmcdonald91 0 4,295 10-12-2020 05:57 PM
Last Post: rcmcdonald91
  Yealink C920 password issue DaveK 3 11,749 09-11-2020 12:02 PM
Last Post: complex1
  LDAP Directory Configuration Issue it_prevent 1 6,587 05-15-2019 05:55 AM
Last Post: Mike_Yealink
  Call Park Mode transfer on T48G jasonblewis 2 10,914 11-09-2017 01:26 AM
Last Post: Aishion_Yealink
  Export CFG configuration file Issue Fraukas2 0 7,743 11-08-2017 06:19 PM
Last Post: Fraukas2
  T48G not connecting to Skype Lisa H 0 4,518 10-16-2017 03:17 AM
Last Post: Lisa H
Bug T46g & T48G RADIUS 802.1x and SHA256 Bigmac 22 56,288 08-13-2017 07:54 PM
Last Post: MiKeDaDoC

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication