[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Auto Provisioning - General Question
Author Message
CraigFox Offline
Junior Member
**

Posts: 18
Joined: Apr 2013
Reputation: 0
Post: #1
Auto Provisioning - General Question
OK, This is a lob into the community for a recommendation on how to setup an auto-provisioning solutions.

GOAL-1: A zero touch solution to provision phones to register on the phone system.
GOAL-2: Provide the ability to Authenticate the Phone to the provisioning system (e.g. username/password)
GOAL-3: Encrypt the provisioning information during transport (e.g. ftps, https, etc)

Solution-1: TFTP - no authentication mechanism, not encryption mechanism
Solution-2: FTP/HTTP - no encryption mechanism, Problem, how to get the username/password for the site to the phone automatically?
Solution-3: FTPS/FTPES/SFTP/HTTPS - Problem, How to get the username/password to the phone automatically. Not sure it's supported by Yealink

Any solutions, ideas, comments would be greatly appreciated

The glass is neither half full nor half empty, It's too big.
09-08-2014 10:08 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
James_Yealink Offline
Administrator
*******

Posts: 1,159
Joined: Aug 2014
Reputation: 8
Post: #2
RE: Auto Provisioning - General Question
Hi CraigFox,

To answer your qeustion:

1.FTPS/FTPES/SFTP are not supported in Yealink phones.
2.The username/password can't be obtain automatically, you have to configure it through autoprovision or manual. A suggestion is creating a private provision server using DHCP option when you deploy these phones. Place a configuration file in this private provision server which contain username/password and change the autoprovision URL to a HTTPS server. After booting up, the phone can get an username/password and an HTTPS autoprovision server URL.
3. The above operation can be achieved through RPS too.

Regards,
James
09-10-2014 05:29 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
Smile W73P dect phone not allowing to auto-provision as different extension Andi_Dee 3 1,454 04-05-2024 09:25 AM
Last Post: sarahlison
  Auto Provision Wall Paper Stopped Working TRP Tech 5 9,388 02-19-2024 12:02 AM
Last Post: jamesalan
  How to disable Voicemail from .cfg in auto provisioning file? boniakowski 2 1,467 09-19-2023 12:03 AM
Last Post: boniakowski
  VPN Changes Do Not Get Auto-Provisioned joe1st 3 2,838 08-08-2023 12:35 AM
Last Post: cecilberge
Wink Auto Provsioning EOL products and devices that do dont have recent firmware releases GalacticSolutions 3 5,829 04-12-2023 05:32 PM
Last Post: aaronmedina
  account.X provisioning vieri 7 5,003 02-10-2023 07:02 PM
Last Post: vieri
  Yealink T54W Auto Provision not working h.cmc 1 3,716 12-09-2022 08:31 PM
Last Post: complex1
  T46U Not Contacting Provisioning Server 88fingerslukee 0 2,162 09-06-2022 11:43 PM
Last Post: 88fingerslukee
  Need help auto provisioning a phone with Nextiva service. LittleDogTech 3 4,956 08-30-2022 06:28 PM
Last Post: complex1
  Auto provision username and password kbrownlees 7 22,826 08-23-2022 11:16 PM
Last Post: mbole

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication