[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
T46G: Configure Programable Key's
Author Message
Kamiware Offline
Junior Member
**

Posts: 13
Joined: Sep 2014
Reputation: 0
Post: #1
T46G: Configure Programable Key's
I wrote an XML based phonebook for our Yealink phones. So there is 1 central phoneblook that get pushed to all our phones.

The idea is that the users should never use the internal phonebook of the phone.

So I provision this:
programablekey.2.type = 47
programablekey.2.label = Phonebook
remote_phonebook.data.X.url = http://.....
remote_phonebook.data.X.name = abcd...

Onhook, that works perfectly, on the screen the user sees 'Phonebook' and when clicking on it, he comes into the XML phonebooks.

However, when the horn is offhook, the Programable Key's change, and then, the first button is 'Directory' and it goes to the local phonebook.
Is there a way to replace this button so it also goes to the XML phonebook?

(I looked in provisioning manual & in phone webinterface but did not find it.

Greetings,
Samuel
http://www.voipplay.be
09-05-2014 05:24 PM
Visit this user's website Find all posts by this user    like0    dislike0 Quote this message in a reply
Yealink Support Offline
Administrator
*******

Posts: 2,683
Joined: Dec 2012
Reputation: 25
Post: #2
RE: T46G: Configure Programable Key's
Hi Kamiware,

I have tested the Auto provision in my side. Do you want to use remote phonebook when offhook?
If yes, please try below steps:
1. reste your phone. Just want to clear the previous settings. Also you can access to web gui->DSSKEY->Programable Key->softkey2, set the value to Directory back.
2. Access to web gui->Directory->Remote Phone Book tab, enter the remote phonebook url into Remote URL field and display name.
Or you can use below autop sentences.
Code:
remote_phonebook.data.1.url = http://...
remote_phonebook.data.1.name = Yealink...
3. Access to web GUI->Directory->settings tab, In the Directory block, select the remote phone from the Disabled column and then
click right arrow button. The selected list appears in the Enabled column. Click confirm to accept the change. please refer to attachment.

For more information, please refer to the guide.
admin guide

thanks


Attached File(s) Thumbnail(s)
   
(This post was last modified: 09-06-2014 11:20 AM by Yealink Support.)
09-06-2014 11:20 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Kamiware Offline
Junior Member
**

Posts: 13
Joined: Sep 2014
Reputation: 0
Post: #3
RE: T46G: Configure Programable Key's
Thanks, that works.
09-16-2014 06:57 PM
Visit this user's website Find all posts by this user    like0    dislike0 Quote this message in a reply
bart2puck Offline
Junior Member
**

Posts: 7
Joined: Sep 2014
Reputation: 0
Post: #4
RE: T46G: Configure Programable Key's
Is it possible to do this:
"3. Access to web GUI->Directory->settings tab, In the Directory block, select the remote phone from the Disabled column and then
click right arrow button. The selected list appears in the Enabled column. Click confirm to accept the change. please refer to attachment."

via a config file for autoprovisioning?
03-20-2015 03:31 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Flora_Yealink Offline
Senior Member
****

Posts: 265
Joined: Oct 2012
Reputation: 4
Post: #5
RE: T46G: Configure Programable Key's
Hello ,
If you want to enable the remote phonebook under Directory->Setting in the web Page.
you can use below syntax
#Configure the access URL for downloading the files for direcory setting.
directory_setting.url =http://10.2.5.192:8080/T4X/favorite_setting.xml (please change the path of your auto provisioning server address)
the content of the favorite_setting.xml like below,
<root_favorite_set>
<item id_name="localdirectory" display_name="Local Directory" priority="1" enable="1" />
<item id_name="history" display_name="History" priority="2" enable="0" />
<item id_name="networkcalllog" display_name="Network CallLog" priority="3" enable="0" />
<item id_name="remotedirectory" display_name="Remote Phone Book" priority="4" enable="1" />
<item id_name="ldap" display_name="LDAP" priority="5" enable="0" />
<item id_name="broadsoftdirectory" display_name="Broadsoft Directory" priority="6" enable="0" />
</root_favorite_set>

also, you can refer to the Yealink website to download the auto provisioning file and guide.

Flora
FAE (Field Application Engineer) Department
Yealink Network Technology Co., Ltd.
Website: http://www.yealink.com
03-20-2015 04:36 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Automatically Configure Screen Saver MP56 nthoman@bmic.com 0 954 10-20-2023 03:44 AM
Last Post: nthoman@bmic.com
  Configure Yealink Phones autoprov and Action URLS on demand adeo 1 5,605 11-16-2022 10:52 PM
Last Post: bomberyealink
  T46G RingCentral Provisioning jszima 0 4,007 03-07-2022 10:24 AM
Last Post: jszima
  Auto provisioning seams to be (partly) broken in version 83 for T46G HaraldL 2 11,065 07-02-2019 03:04 PM
Last Post: Fraukas2
  T42G Programable Key as park call jasonblewis 4 11,968 10-26-2017 06:07 AM
Last Post: jasonblewis
  Language files for T46G & T48G camouflageX 2 10,759 07-25-2017 06:53 PM
Last Post: Kamik
  T46G provision screensaver settings n1cks21 1 8,249 10-11-2016 09:37 PM
Last Post: n1cks21
  T42G and T46G ninjoan 0 4,731 10-04-2016 02:20 AM
Last Post: ninjoan
  T46G - Set TLS transport mode in configuration file is ignored DSchumacher 1 8,185 04-13-2016 06:08 AM
Last Post: Karl_Yealink
  T46G - uploaded ringtone not enabled timalex 9 25,497 03-12-2015 02:43 PM
Last Post: James_Yealink

Forum Jump:


User(s) browsing this thread:

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication