[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Expansion Modules
Author Message
BFeller Offline
Junior Member
**

Posts: 1
Joined: Aug 2014
Reputation: 0
Post: #1
Expansion Modules
I have a Yealink T26 phone. I would like to assign a blf to the buttons on the separate expansion module using the config template. However, I can not get the information to come out right. Here's what I've got so far....

################################################################################​##########
## Expansion Module 1 ##
################################################################################​##########
#X ranges from 1 to 16, Y ranges from 1 to 40.
#expansion_module.x.key.y.type = 37 (Switch by default)
#expansion_module.x.key.y.line = 0
#expansion_module.x.key.y.value =
#expansion_module.x.key.y.pickup_value =
#expansion_module.x.key.y.label =
#expansion_module.X.key.Y.xml_phonebook =

#Expansion module1 key1
{IF blf11}
expansion_module.1.key.1.type = %%DKtype%%
expansion_module.1.key.1.line = %%Line%%
expansion_module.1.key.1.value = %%blf11%%
expansion_module.1.key.1.pickup_value = %%PickupValue%%
expansion_module.1.key.1.label = %%blffirstname11%% %%blflastname11%%
expansion_module.1.key.1.xml_phonebook =
{ELSE}
expansion_module.1.key.1.type = 37
expansion_module.1.key.1.label = List 1
{ENDIF}

#Expansion module1 key2
{IF blf12}
expansion_module.1.key.2.type = 16
expansion_module.1.key.2.line = 1
expansion_module.1.key.2.value = 1001
expansion_module.1.key.2.pickup_value = *20*
expansion_module.1.key.2.label = John Doe
expansion_module.1.key.2.xml_phonebook =
{ELSE}
expansion_module.1.key.2.type = NA
{ENDIF}

#Expansion module1 key3
{IF blf13}
expansion_module.1.key.3.type = 16
expansion_module.1.key.3.line = 1
expansion_module.1.key.3.value = 1002
expansion_module.1.key.3.pickup_value = *20*
expansion_module.1.key.3.label = Jane Doe
expansion_module.1.key.3.xml_phonebook =
{ELSE}
expansion_module.1.key.3.type = NA
{ENDIF}


...and so on and so on. However, no matter what values I try to add to the "value", "line", and "type" lines, I either get a blank spot on the line on the LCD screen of the module, or I get "blf" (when trying to use '16' as the value in the second type field instead of 'NA')

What I'm ultimately trying to do is assign an extension to a key on the module.
(This post was last modified: 08-27-2014 11:52 PM by BFeller.)
08-27-2014 11:47 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yealink Support Offline
Administrator
*******

Posts: 2,683
Joined: Dec 2012
Reputation: 25
Post: #2
RE: Expansion Modules
Hi BFeller,

What you really want to do is assigning a blf to the buttons on the separate expansion module via auto provision,right.
I have tested phone on 3CX in my side, and using the template like below:
[Image: attachment.php?aid=953]
And the Memory key LED is solid green when the monitored user is idle.
But fast flashing red (200ms),when the monitored user receives an incoming call.
When the monitored user is idle, the supervisor presses the BLF key to dial out the phone number. When the monitored user receives an incoming call, the supervisor presses the BLF key to pick up the call directly. When the monitored user is in a call, the supervisor presses the BLF key to interrupt and set up a conference call.

Thx


Attached File(s) Thumbnail(s)
   
08-29-2014 08:38 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Expansion modul LED pio007 3 9,967 10-24-2015 10:33 PM
Last Post: pio007

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication