[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 1 Votes - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
t46g: intercom over speaker rather than headset?
Author Message
asinshesq Offline
Junior Member
**

Posts: 44
Joined: Jul 2014
Reputation: 1
Post: #1
t46g: intercom over speaker rather than headset?
I have a headset connected to a t46g via an ehs36. When I pick up the phone by clicking the pick up button on my headset, the phone goes into 'headset' mode (the headset light on the t46g turns on) and when I then hang up the phone (again by clicking the button on my headset) the phone remains in headset mode. That means that if someone else wants to intercom this phone, the sound comes through the headset and that is not what I want...I want intercom to always come over the speakerphone. So my question: how can I get an incoming intercom call to always come in over the speakerphone (or stated another way, how can I get the phone to exit headset mode whenever I hang up, or how can I set things up so that non-headset mode is always the default)?

Note that I have the t46g headset priority setting disabled so I don't think that's the problem.
(This post was last modified: 08-28-2014 02:36 AM by asinshesq.)
08-27-2014 07:34 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Lucas1 Offline
Super Moderator
******

Posts: 51
Joined: Aug 2014
Reputation: 0
Post: #2
RE: t46g: intercom over speaker rather than headset?
Hi,nice to contact you.
Thanks for your continuously support for Yealink products.
I read your description, unless speakerphone mode(press speakerphone key), I afraid that haven't other way to always choose the speakerphone when connect the headset ,but if you want to both headset and speakerphone can hear voice, you can choose Group Listening feature.
You can configure this feature by seting DSS key parameters:Select the Group Listening from the pull-down list of Type.
Hope can help you.
09-01-2014 06:27 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
asinshesq Offline
Junior Member
**

Posts: 44
Joined: Jul 2014
Reputation: 1
Post: #3
RE: t46g: intercom over speaker rather than headset?
Thanks. That would be perfect except that group listening does not allow talking through the speakerphone (only through the headset). When another phone intercoms this phone I would like to have people be able to answer using the speakerphone. Any way to do that?
09-01-2014 07:40 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
asinshesq Offline
Junior Member
**

Posts: 44
Joined: Jul 2014
Reputation: 1
Post: #4
RE: t46g: intercom over speaker rather than headset?
Sorry to bump my own topic, but I keep thinking there must be a way to fix this issue. All I really need is for the default state of the phone NOT to be headset.

To simplify my earlier posts: when I use the headset and then hang up the phone, the phone remains in headset mode (the headset light remains lit when I hang up). If I can get the phone to automatically exit headset mode when I hang it up, I'll be all set. Isn't there some way to do that?
01-03-2015 11:52 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
James_Yealink Offline
Administrator
*******

Posts: 1,159
Joined: Aug 2014
Reputation: 8
Post: #5
RE: t46g: intercom over speaker rather than headset?
Hi,

If you connect a headset and use it to answer a call then phone will keep the headset mode on. There is no an option to set this behavior.

If you want to have people be able to answer using the speakerphone you can direcltry press speaker button to switch to speaker channel. From the disscusion before it seems that this can't meet your need? May I know the reason?

Regards,
James
01-05-2015 02:41 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
asinshesq Offline
Junior Member
**

Posts: 44
Joined: Jul 2014
Reputation: 1
Post: #6
RE: t46g: intercom over speaker rather than headset?
(01-05-2015 02:41 PM)Yealink_James Wrote:  If you want to have people be able to answer using the speakerphone you can direcltry press speaker button to switch to speaker channel. From the disscusion before it seems that this can't meet your need? May I know the reason?

Hi, James, and thanks for your reply. I need the phone to auto answer intercom calls so if another extension calls via an intercom call the caller will be able to start speaking without the listener having to come to the phone. This doesn't work if the phone is in headset mode (since in that case the phone will autoanswer and the caller's voice will only come over the headphones and thus cannot be heard in the room).

I realize from earlier in this topic that it is possible to set things up in Group Listening mode so that the audio comes over the speaker and headset at the same time, but that doesn't work because I need the person receiving an intercom call to be able to speak without going to the phone.

I have worked around this problem by setting up a W52p in the same room (people can intercom to that one), but that's not ideal (especially since the W52p does not give an option to autoanswer direct ip calls and I would prefer being able to use those for my intercom calls so I can at some point get rid of my pbx and just connect my phones to a voip service and still be able to intercom with autoanswer, as I describe in more detail here: http://forum.yealink.com/forum/showthread.php?tid=3084 ).
01-07-2015 02:31 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
cm21 Offline
Junior Member
**

Posts: 11
Joined: Dec 2014
Reputation: 0
Post: #7
RE: t46g: intercom over speaker rather than headset?
I am setting up T48G's and am running into the same issue. I would strongly encourage an option or SIP header parameter, etc, that would ensure speaker mode for an intercom call. Please advise if there are any solutions.

Related to this, I'm unclear exactly what the T48G is looking for to tell it that an incoming call is "intercom". So far, the only thing that makes it auto-answer is setting the "Answer-After" header. However, at least with that method, the intercom settings "Accept Intercom" and "Warning Tone" seem to be ignored. It auto-answers the intercom call even if Accept Intercom is disabled.

I see through packet captures that for an outgoing call made from an "Intercom" DSS button, that the phone sets the URI parameter intercom=true. However, when that parameter is received on an incoming call it's not appearing to have any effect.

Can you clarify exactly which SIP options/parameters the phone uses for handling an intercom call?
01-24-2015 01:54 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
kg4ysy Offline
Member
***

Posts: 65
Joined: May 2013
Reputation: 2
Post: #8
RE: t46g: intercom over speaker rather than headset?
I would like this feature as well. The intercom feature isn't terribly useful if the person can't hear you. Many people here utilize a headset, but we don't have a high call volume. This means that the headset is usually sitting on the desk. If we try to use the intercom, they can't hear it. I would like to be able to set it so that the intercom always goes through the speaker.
02-12-2015 04:34 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
James_Yealink Offline
Administrator
*******

Posts: 1,159
Joined: Aug 2014
Reputation: 8
Post: #9
RE: t46g: intercom over speaker rather than headset?
Hi All,

I have sent the request to our product dept. They will consider this experience in new firmware.

Regards,
James
02-12-2015 02:11 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
thinkcsc Offline
Junior Member
**

Posts: 1
Joined: Feb 2015
Reputation: 0
Post: #10
RE: t46g: intercom over speaker rather than headset?
Please keep us updated, I came from Aastra phones and this seems like such a basic functionality to be missing and badly needed by our users.

Thanks!
02-14-2015 04:53 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  MP50 no audio on Bluetooth headset Tekguy125 0 1,289 04-04-2024 05:35 AM
Last Post: Tekguy125
  T46U Yealink Phone and WH63 Wireless Headset sforaker 0 2,292 09-06-2022 07:50 PM
Last Post: sforaker
  How to increase Intercom tone volume? jasonsomers 6 26,446 02-11-2022 12:51 AM
Last Post: grstorga
  MP56 - Speaker Phone Quality UBYeah 7 16,663 01-18-2022 04:45 AM
Last Post: yllw98stng
  T55A USB headset mic send volume too low joleti@temperzone.com 0 3,424 10-29-2021 04:06 AM
Last Post: joleti@temperzone.com
  T46G - Disable Line Key Configuration ? timalex 13 49,658 04-12-2019 09:23 AM
Last Post: Johnny88
  Headset Prior (Yealink T21P) dreemer 4 15,456 11-05-2018 03:44 PM
Last Post: dreemer
  T46G Call Fwd DSS Key enables / disables ALL fwd types MintTelecom 4 18,691 02-06-2018 05:28 AM
Last Post: Aishion_Yealink
  T46G 28.82.0.2.0 -- BUG Tyler 1 7,692 09-29-2017 05:58 AM
Last Post: Lucia_Yealink
  T46G - Display IP Cam Picture or MJPG Video Stream via DSS Key smartpc 10 42,620 04-14-2017 11:46 AM
Last Post: MohammedTahir

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication