[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
T48G problem with incoming calls
Author Message
Yealink_acc Offline
Junior Member
**

Posts: 2
Joined: Sep 2016
Reputation: 0
Post: #1
T48G problem with incoming calls
Hi together,
Since 2 days I have a problem with my T48G. Each incoming call will be rejected, the test via the SIP online portal (vendor: sipgate) reports a connection error and the T48G reports a new missed call. The SIP vendor's technical support has also checked the connection an means, that the phone does not accept the incoming call.
Outgoing calls are ok. I have reset all settings und have updated the firmware - but no success, the failure is still remaining.
The time before the 2 days all was working fine...

Any ideas what I can do?
I like the phone an I will not replace it, but I need it working.

Thanks, Alexander
09-07-2016 08:25 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Karl_Yealink Offline
Super Moderator
******

Posts: 673
Joined: Apr 2015
Reputation: 5
Post: #2
RE: T48G problem with incoming calls
Will the phone ringing in short time then reject and show missed call?
Or the phone don't ringing just show missed call?

Can you tell me the firmware version of your phones?
And help us to capture the trace files, we can check more from them.
Please refer to the FAQ: http://support.yealink.com/faq/faqInfo?id=311

If you get the trace files, please email to me(karl@yealink.com) and copy this post.
I will check and give you respond.
09-08-2016 04:36 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yealink_acc Offline
Junior Member
**

Posts: 2
Joined: Sep 2016
Reputation: 0
Post: #3
RE: T48G problem with incoming calls
Hi Karl,
The phone don't ringing just show missed call.
Firmware Version: 35.80.0.130
Hardware Version: 35.1.0.2.1.0.0
I have sent the trace file.

Thank you for your support.

Best regards, Alexander



Or the phone don't ringing just show missed call?

(09-08-2016 04:36 AM)Yealink_Karl Wrote:  Will the phone ringing in short time then reject and show missed call?
Or the phone don't ringing just show missed call?

Can you tell me the firmware version of your phones?
And help us to capture the trace files, we can check more from them.
Please refer to the FAQ: http://support.yealink.com/faq/faqInfo?id=311

If you get the trace files, please email to me(karl@yealink.com) and copy this post.
I will check and give you respond.
09-08-2016 06:04 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Karl_Yealink Offline
Super Moderator
******

Posts: 673
Joined: Apr 2015
Reputation: 5
Post: #4
RE: T48G problem with incoming calls
I check the file, when the phone receive incoming call, the phone replay 480 Temporarily not available.
Can you check the option: Account->Basic->Local Anonymous Rejection.
Please disable this option then test again.

If it can't work, please help us to get the files again.
Note, you just send the syslog file to me, I hope you can also send the PCAP and config.bin files to me together.
09-09-2016 04:02 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Karl_Yealink Offline
Super Moderator
******

Posts: 673
Joined: Apr 2015
Reputation: 5
Post: #5
RE: T48G problem with incoming calls
we find you enable the DND, so the phone can't ringing. Please disable then test again.
09-14-2016 11:05 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
pipestone69 Offline
Junior Member
**

Posts: 1
Joined: Sep 2016
Reputation: 0
Post: #6
RE: T48G problem with incoming calls
Hi Karl I updated the Firmware Version: 35.80.0.130 Hardware Version: 35.1.0.2.1.0.0 and I have the same problem as Alexander.
Many thanks, Mario
09-28-2016 09:13 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  T48G/T49G on Ring Central? Gordon 2 9,283 12-27-2023 10:38 AM
Last Post: jseeley
  T48G Top row keypad buttons requiring too much pressure after time Chris708 4 9,823 11-16-2023 01:08 AM
Last Post: here4real
  How to stop transferring calls on hold EcoEco 0 685 10-24-2023 09:08 AM
Last Post: EcoEco
  Model T42s and T42g, the speakerphone is enable on incoming calls Lissvazquez 6 2,725 07-28-2023 10:27 PM
Last Post: complex1
  T48G Connected handset not answering or ending call with connected handset. Pettis 4 2,326 07-27-2023 05:38 AM
Last Post: Lissvazquez
  Disable X button to reject calls hercross 0 771 07-07-2023 04:01 PM
Last Post: hercross
  T48G + EHS36 +Janra engage 75 not hanging up call kris.hetherington@firstsource.com 1 5,204 09-30-2022 03:23 AM
Last Post: knewgent
  T48G - TLS 1.2 Support for 3CX Futureweb 1 2,511 09-30-2022 12:55 AM
Last Post: complex1
  Distinctive Ringtones for Internal Calls harrys 0 1,577 07-10-2022 09:03 PM
Last Post: harrys
  ghost calls to cid:XXXXX bfcoi974 8 8,799 06-21-2022 07:37 PM
Last Post: bfcoi974

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication