[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
BLF Keys are not woking
Author Message
mak_make Offline
Junior Member
**

Posts: 5
Joined: Feb 2013
Reputation: 0
Post: #1
BLF Keys are not woking
Hello,

I am using elastix 2.3 along with Yealink T28 P with firmware version 2.61 and 2.7.

I am facing BLF issues with call park application.

I am using the 904 code to park the call (which is working fine).

Now, to retrieve the calls, I am have assigning DSS key with BLF feature. the configuration as follows:

DSS key1
Type: BLF
Value=905 (which is my parked extension)
Extension= *8

also I have tried second configuration as
DSS key1
Type: BLF
Value=905 (which is my parked extension)
Extension= 905

in both cases the Key light is solid green. but when I parked the call to the particular extension it's not turning into red.

can you please help me on how to fix the issue.

Regards,
Anand
02-09-2013 03:26 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
PaulC Offline
Junior Member
**

Posts: 12
Joined: Feb 2013
Reputation: 1
Post: #2
RE: BLF Keys are not woking
Have you got hints for 905 in your dialplan? I'm not too familiar with Elastix but I know I've read something somewhere about Asterisk and using BLF for parking slots, and hints were definitely required (so the phone could subscribe to state change notifications).
02-09-2013 09:12 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
mak_make Offline
Junior Member
**

Posts: 5
Joined: Feb 2013
Reputation: 0
Post: #3
RE: BLF Keys are not woking
(02-09-2013 09:12 AM)PaulC Wrote:  Have you got hints for 905 in your dialplan? I'm not too familiar with Elastix but I know I've read something somewhere about Asterisk and using BLF for parking slots, and hints were definitely required (so the phone could subscribe to state change notifications).

Yes, I have added hits to the dial plan. but it's still not working.
02-09-2013 09:45 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
PaulC Offline
Junior Member
**

Posts: 12
Joined: Feb 2013
Reputation: 1
Post: #4
RE: BLF Keys are not woking
Hmm... I'm not sure what to suggest.. Do you know what version of Asterisk is running underneath the version of Elastix you have installed?

I'd also be tempted to spin up a VM with a clean/fresh install of Asterisk (and no Elastix), then configure it manually to see if it works. At my office we have Asterisk 10.0.x and BLF works as expected for regular extensions, but we're not using parking slots. Maybe I'll play over the weekend at home and let you know how it goes..
02-09-2013 10:54 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  T23G losing multiple line keys CSherwood 2 8,697 07-23-2015 02:24 AM
Last Post: CSherwood
  How to program memory keys for configuration blink 3 11,046 03-17-2015 05:16 PM
Last Post: Yealink_Peter
  T26P - DSS Keys with BLF to external lines jyamaca 4 12,355 12-11-2014 04:26 AM
Last Post: jyamaca
  Multiple SIP registrations on separate line keys not consistent neurosys 3 13,522 03-04-2014 02:23 PM
Last Post: Yealink Support
  line keys automatically configured for BLF nazg82 1 7,318 06-06-2013 06:23 AM
Last Post: CWR
  Can only use 4 BLFList Keys with Broadsoft AGingerich 1 9,111 03-27-2013 02:04 PM
Last Post: Yealink Support

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication