T48G DSS Key Issue

[SHumpH15]

I am having an issue configuring the DSS keys slots 21-29 on the T48g
No matter what I do the config will not take. I have tried using the config file and it does not work. It actually erases the 21-29 entries on reboot.

if I use the gui it just hangs when I hit confirm. The url also looks wrong
it starts as /servlet?p=dsskey&model=1&q=load&linepage=3
but when you hit confirm it changes to /servlet?p=dsskey&model=1&q=load&linepage=4 and hangs

[SHumpH15]

yealink support

is there an update/fix for this issue? I need all of my dss keys working.

Thanks

[Yealink Support]

Hi,

I successfully configurate DSS keys slots 21-29 on the T48g based on the latest version 35.72.0.30
Can you let us know what version you're using it
I suggest that you use the latest version and try again
Here is the latest Firmware version 35.72.0.30,please check
ftp://Jim:v2R88xcL@ftp.yealink.com/%C1%D...2.0.30.rom

[Slator]

I know I am a little late to the "party" but I have a similar issue that I just posted a thread for - I did not see this thread before I posted...
http://forum.yealink.com/forum/showthrea...id=25733CX

v12 + all updates
T48G with 35.72.0.225 Firmware (from Yealink Downloads)

I am NOT able to auto provision the DSS Keys - at least, not DSS Key 7; I have not tested any other DSS Keys.
The provisioning process would appear to work properly but, nothing is visible on the T48G phone.

However, I can manually provision the DSS Keys via the phone display - I have not tested via the web interface but, I suspect this would also work.
I can also (manually) provision each individual T48G's DSS Keys via the 3CX Management Console's BLF feature set.

Should I try changing the Firmware = 35.72.0.30 ?

[johnnyforever]

Version
Firmware Version 35.73.0.50
Hardware Version 35.1.0.2.1.0.0


We are still getting the same issue.
All of our handsets have upgraded firmware.

Line Key21-29 will not add via the browser.
Only manually.

[Elaine_Yealink]

Dears,
I just had a test with latest firmware35.73.0.50 as well as 35.72.0.30, but unable to repeat the problem. So I was wondering if you can take a video of the whole process and also share with me your configuration steps so that I can compare with mine to see if anything missed.

Much appreciated and looking forward to hear from you.
Regards
Elaine

[johnnyforever]

(03-24-2015 06:04 PM)Yealink_Elaine Wrote:  Dears,
I just had a test with latest firmware35.73.0.50 as well as 35.72.0.30, but unable to repeat the problem. So I was wondering if you can take a video of the whole process and also share with me your configuration steps so that I can compare with mine to see if anything missed.

Much appreciated and looking forward to hear from you.
Regards
Elaine

Hello.
I have uploaded a video.
I think its when all previous DSS Keys are used the bug occurs. https://www.youtube.com/watch?v=09c4Gt9O...e=youtu.be

[johnnyforever]

Hello
I have replied and sent PMs
No one has gotten back on the subject.