[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
T26P peer to peer configuration problem
Author Message
CarlosVela Offline
Junior Member
**

Posts: 1
Joined: Jul 2014
Reputation: 0
Post: #1
T26P peer to peer configuration problem
Hi, sirs!
I have a T26P phone that I need to connect in peer to peer mode to another SIP device (an intercom). The problem is that when the connection is stablished, the RTP audio from the T26P to the intercom is sent at a 10ms rate, and the intercom doesn't accept it. Codec used is PCMA.
The OK SIP dialog from the intercom to the phone is correct, and has the "ptime:20" attribute correctly set, but the phone seems to not understand it and sends the packets at 10 ms rate.
I have tried to configure the PTime field in the advanced tab of the accounts, but nothing changes.
How can I configure the default packet time for the peer to peer mode?
07-08-2014 07:37 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Wilson_Yealink Offline
Administrator
*******

Posts: 171
Joined: Aug 2014
Reputation: 0
Post: #2
RE: T26P peer to peer configuration problem
Hi CarlosVela,
I have tested it in my side, it does work well.
So please try below steps:
1. Reset the phone to factory
2. upgrade the firmware to the latest version. The latest firmware version of T26 is 6.72.0.75. Because I test it in this version. So gennerally it should also work in your side. You can get it from below link.
>>6.72.0.75<<

3. If after upgrdaing the issue still exist, please change the codec order of T26 and try again.
Access to web GUI->Account->codec tab, you can change it in the right list field.

thanks
08-27-2014 06:03 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Configuration Generator Tool Abzorb 1 3,694 12-05-2023 08:28 PM
Last Post: ATICT
  Button with led configuration Wesley666 2 9,734 01-27-2022 05:28 AM
Last Post: Beachnuttz
  LDAP "problem" softnetvoip 1 5,064 09-30-2021 05:07 PM
Last Post: softnetvoip
  Read specific variable from phone configuration saivo 0 3,985 06-13-2021 05:23 PM
Last Post: saivo
  DHCP not working on T26P when OpenVPN is enabled. LandonL 11 39,174 05-12-2021 10:46 AM
Last Post: 1sae
  Problem with LDAP hausrocker 0 5,791 03-24-2021 08:28 PM
Last Post: hausrocker
  Proxy configuration Laurentt 2 10,838 01-07-2020 12:25 PM
Last Post: Laurentt
  Detailed boot process and ways to add local configuration? DanH 2 8,396 10-16-2019 04:24 PM
Last Post: justingoldberg
  Common Configuration Filenames Rus 3 12,949 06-27-2019 12:52 AM
Last Post: Evan_Yealink
  LDAP Directory Configuration Issue it_prevent 1 7,405 05-15-2019 05:55 AM
Last Post: Mike_Yealink

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication