[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
T28 Logo Problem
Author Message
hmmcintosh Offline
Junior Member
**

Posts: 7
Joined: Jul 2014
Reputation: 0
Post: #1
T28 Logo Problem
I followed the instructions in the FAQ to change the logo for a T28. I used the sample bmp file that came with PicutreExDemo.exe (after changing its name to make it only 4 characters long). I get the result shown in the attachment. (The logo is there, but it's too small, appears twice, and has a large black area above it.)

Could this be a problem with running a newer version of firmware than the instructions are written for? Any ideas about how to get this to work? (I'm running version 2.72.0.30 of the firmware.)

Thanks!


Attached File(s) Thumbnail(s)
   
07-02-2014 10:50 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
hmmcintosh Offline
Junior Member
**

Posts: 7
Joined: Jul 2014
Reputation: 0
Post: #2
RE: T28 Logo Problem
Since I couldn't get PictureExDemo to work properly, I wrote my own program that converts BMPs and PNGs to DOB so they can be used on Yealink phones. (Compared to PictureExDemo, I think my program would work much better for people. You don't have to put all your files in the root of the drive, or give them short names. It works on Windows 7 and 8.)

Would anyone at Yealink like a copy of this program?
07-05-2014 10:19 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Raffles Offline
DV-IP creator
**

Posts: 29
Joined: Jun 2013
Reputation: 0
Post: #3
RE: T28 Logo Problem
(07-05-2014 10:19 PM)hmmcintosh Wrote:  ...Would anyone at Yealink like a copy of this program?

I would Wink
07-22-2014 09:29 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
seamless Offline
Junior Member
**

Posts: 1
Joined: Jul 2014
Reputation: 0
Post: #4
RE: T28 Logo Problem
Hi, yes please Smile
07-23-2014 08:38 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
hmmcintosh Offline
Junior Member
**

Posts: 7
Joined: Jul 2014
Reputation: 0
Post: #5
RE: T28 Logo Problem
Hi Raffles:

You should be able to download it here:

https://dl.dropboxusercontent.com/u/3954...inkDOB.exe

Two things to note about it:

(1) It currently only supports T28 because that's the only model I have to test with. If you have access to another T2x phone that you can test against, I can send you a version setup for that model.

(2) The png or bmp file you convert needs to be the right size (236x82 for P28). If your input file isn't the right size, please edit it to make it the right size before running my program.

If there are any minor changes you'd like to see in the program, please let me know. Also, if you run into problems using it, please let me know that too.

Thanks,
Harry

Hi Seamless:

You should be able to download it here:

https://dl.dropboxusercontent.com/u/3954...inkDOB.exe

Two things to note about it:

(1) It currently only supports T28 because that's the only model I have to test with. If you have access to another T2x phone that you can test against, I can send you a version setup for that model.

(2) The png or bmp file you convert needs to be the right size (236x82 for P28). If your input file isn't the right size, please edit it to make it the right size before running my program.

If there are any minor changes you'd like to see in the program, please let me know. Also, if you run into problems using it, please let me know that too.

Thanks,
Harry
(This post was last modified: 07-24-2014 03:20 AM by hmmcintosh.)
07-24-2014 03:19 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
hmmcintosh Offline
Junior Member
**

Posts: 7
Joined: Jul 2014
Reputation: 0
Post: #6
RE: T28 Logo Problem
I've uploaded a new version which (1) allows input files with more than 4 colors and (2) translates colors to the appropriate level of gray available in the phone. You can get it here:

https://dl.dropboxusercontent.com/u/3954...inkDOB.exe
07-26-2014 06:55 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
seva Offline
Junior Member
**

Posts: 1
Joined: Feb 2014
Reputation: 0
Post: #7
RE: T28 Logo Problem
hmmcintosh!

Thank YOU so much!
08-22-2014 11:52 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
hmmcintosh Offline
Junior Member
**

Posts: 7
Joined: Jul 2014
Reputation: 0
Post: #8
RE: T28 Logo Problem
You are most welcome. I hope you will find it useful.
08-22-2014 11:55 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
knoxg Offline
Junior Member
**

Posts: 1
Joined: Oct 2014
Reputation: 0
Post: #9
RE: T28 Logo Problem
Hi there. I'm trying to use your program to save a .dob file for a T26P phone, but that phone has a different image size requirement (132 x 64 px). Would you be able to update your app to handle this image size, or better yet, provide the sourcecode to the converter ?

(07-24-2014 03:19 AM)hmmcintosh Wrote:  ...
Two things to note about it:

(1) It currently only supports T28 because that's the only model I have to test with. If you have access to another T2x phone that you can test against, I can send you a version setup for that model.

(2) The png or bmp file you convert needs to be the right size (236x82 for P28). If your input file isn't the right size, please edit it to make it the right size before running my program.

...
10-12-2014 07:57 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
BrettB Offline
Junior Member
**

Posts: 14
Joined: Jan 2013
Reputation: 0
Post: #10
RE: T28 Logo Problem
(07-02-2014 10:50 PM)hmmcintosh Wrote:  I followed the instructions in the FAQ to change the logo for a T28. I used the sample bmp file that came with PicutreExDemo.exe (after changing its name to make it only 4 characters long). I get the result shown in the attachment. (The logo is there, but it's too small, appears twice, and has a large black area above it.)

Could this be a problem with running a newer version of firmware than the instructions are written for? Any ideas about how to get this to work? (I'm running version 2.72.0.30 of the firmware.)

Thanks!
FYI: I had this problem when I used Yealink's PictureExDemo.exe on a 64-bit version of Windows. When I ran it on a 32-bit version, it worked ok.
10-13-2014 12:39 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Lost my configuration trying to fix a static audio problem nestman 0 3,976 06-22-2021 06:33 AM
Last Post: nestman
  T28P LDAP Problem oguzhan 1 7,724 06-10-2020 01:14 PM
Last Post: beldimon
  "On hook" event problem Rafal 6 16,604 03-26-2020 03:35 AM
Last Post: Normfred
  Problem with low-level firmware of telephone T21 E2 protaganist 5 18,161 01-21-2019 11:50 AM
Last Post: protaganist
  T21P dial problem oguzhan 2 9,863 06-20-2018 09:27 AM
Last Post: oguzhan
  Known problem - redial from history Rafal 4 13,338 03-21-2018 06:24 AM
Last Post: Rafal
  Problem with alert BLF in T27P hercross 5 14,122 03-01-2018 05:58 PM
Last Post: Evan_Yealink
  Yealink T21P E2 Communication Problem Windland_Support 1 9,705 08-16-2017 02:44 AM
Last Post: Kevin_Yealink
  SIP T22P Problem liamretrams 2 10,763 06-01-2017 11:22 AM
Last Post: wcolato
Question T27P, Attend transfer problem with yeastar Atontel 0 5,368 09-14-2016 07:57 PM
Last Post: Atontel

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication