[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
T38G pickup handset doesn't answer the incoming call
Author Message
hernexto Offline
Junior Member
**

Posts: 13
Joined: Sep 2013
Reputation: 1
Post: #1
T38G pickup handset doesn't answer the incoming call
Hi,

Sometimes on an incoming call, you pick up the handset but it doesn't 'answer' the incoming call. You must press the 'answer' button.

I checked is not a problem of the hardware trigger. I am using latest generig fimware.

Any reason for this?
06-26-2014 07:21 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yealink Support Offline
Administrator
*******

Posts: 2,683
Joined: Dec 2012
Reputation: 25
Post: #2
RE: T38G pickup handset doesn't answer the incoming call
Hi hernexto,

Could you please provider more info about it for us?
1.May I know how often does this issue occur?
2.What is your phone firmware version currently?
3.Did the issue have existed when you bought the phone from sale? Or after using a period of time? It is an important point for us.
4.Where and who did you buy it from?

thanks in advance
06-27-2014 11:16 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
hernexto Offline
Junior Member
**

Posts: 13
Joined: Sep 2013
Reputation: 1
Post: #3
RE: T38G pickup handset doesn't answer the incoming call
Hi,

1.- The phone operator says hasn't happened anymore for several days, it occurred only 2+2 times on two separate days (I though it happen more often...)
2.- Firmware Version 38.70.0.125 Hardware Version 21.4.5.160.64.0.0
3.- Usage: Phone has 11 months, never happened before, phone manages 150-200 calls on working days.
4.- I bought it (among 20x T32G more) from a local small distributor called DENOVETEL (in spain) no clue who is their supplier. In case it helps for tracking, s/n is: 1106312123400494

Thanks,
07-04-2014 05:04 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
hernexto Offline
Junior Member
**

Posts: 13
Joined: Sep 2013
Reputation: 1
Post: #4
RE: T38G pickup handset doesn't answer the incoming call
OK, I just talked with the afternoon's operator (they are 24/7) and he is suffering this from 'always' (he is working here for 6 months)

Any clue about what is happening??
07-04-2014 09:27 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yealink Support Offline
Administrator
*******

Posts: 2,683
Joined: Dec 2012
Reputation: 25
Post: #5
RE: T38G pickup handset doesn't answer the incoming call
Hi hernexto,

Thanks for your reply.
Do you have the other T38 phones that work well?
Please replace the good handset into the bad phone's. Try again and confirm the issue whether still exist or not.

Any updates, please feedback to me.
thanks
07-10-2014 10:23 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
hernexto Offline
Junior Member
**

Posts: 13
Joined: Sep 2013
Reputation: 1
Post: #6
RE: T38G pickup handset doesn't answer the incoming call
>> "4.- I bought it (among 20x T32G more)"

There is only ONE T38G, the other 20 are T32 and T22G.

As the T38G handset is physically different (bigger maybe?) to the others... I can not replace it, it doesn't fit.

I verified the button on the base (where the handset resides and triggers) and doesn't look like a hardware problem.

The operator has also a T32G that is used in a very similar way, and doens't show that problem.

thanks,

The operator just told me that if we press the trigger-button when it 'seems' to fail... the call is in fact finished !

The only way to talk is to press the "answer" button or the speaker button (if you press it twice, the handset works as spected)
(This post was last modified: 07-10-2014 11:03 PM by hernexto.)
07-10-2014 10:54 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yealink Support Offline
Administrator
*******

Posts: 2,683
Joined: Dec 2012
Reputation: 25
Post: #7
RE: T38G pickup handset doesn't answer the incoming call
Hi hernexto,

I want you replace the handset in order to exclude the handset hardware issue. Our phone don't have the corresponding configuration about it.
Maybe the offhoke key is defective, you can do RMA.
Our RMA process is if your phone is defective and not out of the warranty, you can contact your local distributor to support on you. It is a fastest way.

thanks
07-11-2014 10:46 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Daniel Velasco Offline
Junior Member
**

Posts: 9
Joined: Apr 2014
Reputation: 0
Post: #8
RE: T38G pickup handset doesn't answer the incoming call
(07-11-2014 10:46 AM)Yealink Support Wrote:  Hi hernexto,

I want you replace the handset in order to exclude the handset hardware issue. Our phone don't have the corresponding configuration about it.
Maybe the offhoke key is defective, you can do RMA.
Our RMA process is if your phone is defective and not out of the warranty, you can contact your local distributor to support on you. It is a fastest way.

thanks

Hello,

We have the same problem.

The problem isn't de offhoke button. We have replaced the phone twice. In this case we have model T28 + 3 EXP38 pannel extension.

We have connected DC adaptor of phone and 3 expansion modules.

Sometimes when operator answers the incoming call, the call continue ringing for several seconds, we have to answer the call pressing the "answer" softkey or line key. In this situation the audio ouput is handsfree skeaper and we have to pressing twice the offhoke button because the handset is on the operator's hand.

We don't have the problem when we disconnect the extension pannels.

Firmware Version 2.72.0.75
Hardware Version 1.0.0.39
09-23-2014 05:59 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yealink Support Offline
Administrator
*******

Posts: 2,683
Joined: Dec 2012
Reputation: 25
Post: #9
RE: T38G pickup handset doesn't answer the incoming call
Hi Daniel Velasco,

Would you please help clear below items:
1. Do you mean this issue won't occur every time when operator anser the incoming call? What is scenario while this issue occurs?
2. Why do you need connect 3 EXP38 to the T28 phone? Could you please export the config.bin file of your phone and send it to me?
Access to web GUI->Settings->configuration tab, click the export button and save the config.bin file in you PC. Then you can past it in this tread.

thanks
09-24-2014 04:09 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Daniel Velasco Offline
Junior Member
**

Posts: 9
Joined: Apr 2014
Reputation: 0
Post: #10
RE: T38G pickup handset doesn't answer the incoming call
(09-24-2014 04:09 PM)Yealink Support Wrote:  Hi Daniel Velasco,

Would you please help clear below items:
1. Do you mean this issue won't occur every time when operator anser the incoming call? What is scenario while this issue occurs?
2. Why do you need connect 3 EXP38 to the T28 phone? Could you please export the config.bin file of your phone and send it to me?
Access to web GUI->Settings->configuration tab, click the export button and save the config.bin file in you PC. Then you can past it in this tread.

thanks


Hi,

We connect 3 EXP38 because we need monitoring about 70 extensions and 20-30 speed dials.

I was with operator during 8 hours, and this problems occured 6-8 times with 100-120 calls. The phone was in standby, the phone rings with incoming call, operator answer the call pick up the handset and the call wasn't answered. We needed to answer the call (at 3, 5, 10 seconds, it depens of everey call) by pressing line key, but the audio output was the speaker.

We have noted sometimes the BLF on EXP-T38 are too slow.


Attached File(s)
.bin  config.bin (Size: 197.5 KB / Downloads: 1)
09-25-2014 04:03 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  MP56 Auto Answer Teams Call perryhill@polk-county.net 0 152 06-03-2024 09:37 PM
Last Post: perryhill@polk-county.net
  MP50 ends call in some phone trees TRK45 0 1,411 05-10-2023 12:19 AM
Last Post: TRK45
  W60B - LDAP - Missing names in call history Scherm 0 1,439 03-07-2023 02:06 AM
Last Post: Scherm
  MP56 - MS Teams Call Queue name not showing grahamhosking 1 3,916 03-03-2023 05:59 AM
Last Post: MSinclair@bunker.technology
  MP50 - Unable to use pound (#) key during a phone call Alexandre Cottinet 0 2,332 02-14-2023 10:28 PM
Last Post: Alexandre Cottinet
Information W57r DECT handset using emergency alarm button as speed dial Upcraft 0 2,371 07-07-2022 04:03 AM
Last Post: Upcraft
  MP50 won't initiate a call on a Mac (Big Sur) computer? microdaft 2 7,967 05-31-2022 01:54 AM
Last Post: Christianpoulton
Brick MP50 stuck after call transfer af@benenden.school 4 9,834 12-22-2021 07:24 PM
Last Post: af@benenden.school
  Cannot disable audible Park notifications during active call livehappy42 3 5,806 11-13-2021 09:11 AM
Last Post: livehappy42
  T57W Call Park Alert bcramer 1 6,399 10-29-2021 05:33 AM
Last Post: livehappy42

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication